Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Pile et al., “Design and Construction of the Linac Coherent Light Source (LCLS) Undulator System”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THAAU01, pp. 460-466.
[n] R. L. Geng et al., “200 MHz Nb-Cu Cavities for Muon Acceleration”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper WEO06, pp. 531-534.
[n] J. T. Maniscalco, D. Gonnella, D. L. Hall, P. N. Koufalis, and M. Liepe, “Pulsed Field Limits in SRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2341-2343. doi:10.18429/JACoW-IPAC2016-WEPMR030
[n] D. A. Dohan and M. M. Mouat, “High Level Extensions to the TRIUMF Central Control System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-03, pp. 414-417.
[n] J. Seeman et al., “Achieving a Luminosity of 1034/cm2/s in the PEP-II B-factory”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS045, pp. 643-645.
[n] M. A. Fedorov et al., “Leveraging Splunk for Control System Monitoring and Management”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 253-257. doi:10.18429/JACoW-ICALEPCS2017-TUCPA02
[n] D. R. Walters et al., “Vacuum and Beam Diagnostics for the Linac Coherent Light Source (LCLS) Undulator System”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH089, pp. 455-458.
[n] M. Sawamura, R. Hajima, R. Nagai, and N. Nishimori, “Design of ERL Spoke Cavity for Non-destructive Assay Research”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper PSP021, pp. 140-143.
[n] T. Hays and H. Padamsee, “Measuring the RF Critical Field of Pb, Nb, and Nb3Sn”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D01, pp. 789-794.
[n] J. Seeman et al., “Design of a 1036 cm-2 s-1 Super-B Factory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP039, pp. 2605-2607.
[n] S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675.
[n] C. Baumgarten, “Beam Based Calibration Measurements at the PSI Cyclotron Facility”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 342-344. doi:10.18429/JACoW-Cyclotrons2016-THP16
[n] P. G. O, L. D. Hansborough, and T. J. Zaugg, “Compact Emittance Scanners for MeV Particle Beams”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1553-1556.
[n] C. Yao, Y.-C. Chae, S. H. Kim, L. H. Morrison, and H. Shang, “Development of a Horizontal Drive Stripline for the APS Transverse Feedback System”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG046, pp. 228-230.
[n] A. Afanasev, Y. S. Derbenev, V. S. Morozov, V. Ivanov, and R. P. Johnson, “Epicyclic Twin-Helix Ionization Cooling Simulations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP036, pp. 163-165.
[n] A. Lumpkin and B. Yang, “Status of the Synchrotron Radiation Monitors for the APS Facility Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ09, pp. 2470-2472.
[n] R. L. Geng, H. Padamsee, and V. Shemelin, “Multipacting in a Rectangular Waveguide”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH320, pp. 1228-1230.
[n] U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
[n] A. Schwinn et al., “FESA3 ÔÇô The New Front-End Software Framework at CERN and the FAIR Facility”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WECOAA03, pp. 22-26.
[n] M. Nordby and C. Perkins, “PEP-II Vacuum System Pressure Profile Modeling using EXCEL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2515-2518.
[n] S. Y. Chen, D. Bertwistle, K. Kei, C. Murray, and T. M. Pedersen, “Application of a NEG Coated Chamber at the Canadian Light Source”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 205-208. doi:10.18429/JACoW-MEDSI2016-TUPE19
[n] B. P. Xiao et al., “HOM Consideration of 704 MHz and 2.1 GHz Cavities for LEReC Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 528-531. doi:10.18429/JACoW-IPAC2016-MOPMY009
[n] S. Takeuchi et al., “Superconducting RF Activities at JAERI”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A25, pp. 233-236.
[n] C. Settakorn, M. Hernandez, K. Woods, and H. Wiedemann, “Coherent Far-Infrared Radiation from Electron Bunches”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E103, pp. 599-601.
[n] Y. Jiao, S. Y. Chen, and G. Xu, “Candidate HEPS Lattice Design With Emittances Approaching the Diffraction Limit of Hard X-Rays”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2703-2705. doi:10.18429/JACoW-IPAC2017-WEPAB054
[n] V. N. Litvinenko, B. Burnham, N. Hower, P. Morcombe, and Y. Wu, “Duke Storage Ring Tune Measurements System using Razor Blade and Photomultiplier”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ06, pp. 2461-2463.
[n] B. Dwersteg and Y. Qiao, “High Power Input Coupler Developments at DESY”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G15, pp. XX-XX.
[n] K. Saito and M. Wake, “A New Material Evaluation Method on Niobium by Magnetization Measurement”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F05, pp. 553-557.
[n] S.-H. Kim et al., “SNS Superconducting Linac Power Ramp-Up Status and Plan”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP072, pp. 1457-1459.
[n] S. J. Lee, J. H. Han, and D. E. Kim, “Elliptically Polarizing Undulator Design for PAL-XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4362-4365. doi:10.18429/JACoW-IPAC2018-THPMK031
[n] C. Bianchini, J. Browne, K. H. Kim, P. Krejcik, M. Weaver, and S. Zelazny, “LCLS-II Timing Pattern Generator Configuration GUIs”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 307-310. doi:10.18429/JACoW-ICALEPCS2017-TUMPL04
For LaTeX
Use Complete Form
For BibTeX
References
- G. Pile et al., “Design and Construction of the Linac Coherent Light Source (LCLS) Undulator System”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THAAU01, pp. 460-466.
- R. L. Geng et al., “200 MHz Nb-Cu Cavities for Muon Acceleration”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper WEO06, pp. 531-534.
- J. T. Maniscalco, D. Gonnella, D. L. Hall, P. N. Koufalis, and M. Liepe, “Pulsed Field Limits in SRF Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2341-2343.
- D. A. Dohan and M. M. Mouat, “High Level Extensions to the TRIUMF Central Control System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-03, pp. 414-417.
- J. Seeman et al., “Achieving a Luminosity of 1034/cm2/s in the PEP-II B-factory”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS045, pp. 643-645.
- M. A. Fedorov et al., “Leveraging Splunk for Control System Monitoring and Management”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 253-257.
- D. R. Walters et al., “Vacuum and Beam Diagnostics for the Linac Coherent Light Source (LCLS) Undulator System”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH089, pp. 455-458.
- M. Sawamura, R. Hajima, R. Nagai, and N. Nishimori, “Design of ERL Spoke Cavity for Non-destructive Assay Research”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper PSP021, pp. 140-143.
- T. Hays and H. Padamsee, “Measuring the RF Critical Field of Pb, Nb, and Nb3Sn”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D01, pp. 789-794.
- J. Seeman et al., “Design of a 1036 cm-2 s-1 Super-B Factory”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP039, pp. 2605-2607.
- S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675.
- C. Baumgarten, “Beam Based Calibration Measurements at the PSI Cyclotron Facility”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 342-344.
- P. G. O, L. D. Hansborough, and T. J. Zaugg, “Compact Emittance Scanners for MeV Particle Beams”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1553-1556.
- C. Yao, Y.-C. Chae, S. H. Kim, L. H. Morrison, and H. Shang, “Development of a Horizontal Drive Stripline for the APS Transverse Feedback System”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUPG046, pp. 228-230.
- A. Afanasev, Y. S. Derbenev, V. S. Morozov, V. Ivanov, and R. P. Johnson, “Epicyclic Twin-Helix Ionization Cooling Simulations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP036, pp. 163-165.
- A. Lumpkin and B. Yang, “Status of the Synchrotron Radiation Monitors for the APS Facility Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ09, pp. 2470-2472.
- R. L. Geng, H. Padamsee, and V. Shemelin, “Multipacting in a Rectangular Waveguide”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH320, pp. 1228-1230.
- U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
- A. Schwinn et al., “FESA3 ÔÇô The New Front-End Software Framework at CERN and the FAIR Facility”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WECOAA03, pp. 22-26.
- M. Nordby and C. Perkins, “PEP-II Vacuum System Pressure Profile Modeling using EXCEL”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2515-2518.
- S. Y. Chen, D. Bertwistle, K. Kei, C. Murray, and T. M. Pedersen, “Application of a NEG Coated Chamber at the Canadian Light Source”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 205-208.
- B. P. Xiao et al., “HOM Consideration of 704 MHz and 2.1 GHz Cavities for LEReC Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 528-531.
- S. Takeuchi et al., “Superconducting RF Activities at JAERI”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A25, pp. 233-236.
- C. Settakorn, M. Hernandez, K. Woods, and H. Wiedemann, “Coherent Far-Infrared Radiation from Electron Bunches”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5E103, pp. 599-601.
- Y. Jiao, S. Y. Chen, and G. Xu, “Candidate HEPS Lattice Design With Emittances Approaching the Diffraction Limit of Hard X-Rays”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2703-2705.
- V. N. Litvinenko, B. Burnham, N. Hower, P. Morcombe, and Y. Wu, “Duke Storage Ring Tune Measurements System using Razor Blade and Photomultiplier”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ06, pp. 2461-2463.
- B. Dwersteg and Y. Qiao, “High Power Input Coupler Developments at DESY”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G15, pp. XX-XX.
- K. Saito and M. Wake, “A New Material Evaluation Method on Niobium by Magnetization Measurement”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F05, pp. 553-557.
- S.-H. Kim et al., “SNS Superconducting Linac Power Ramp-Up Status and Plan”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP072, pp. 1457-1459.
- S. J. Lee, J. H. Han, and D. E. Kim, “Elliptically Polarizing Undulator Design for PAL-XFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4362-4365.
- C. Bianchini, J. Browne, K. H. Kim, P. Krejcik, M. Weaver, and S. Zelazny, “LCLS-II Timing Pattern Generator Configuration GUIs”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 307-310.
Back to search