Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] O. Mohsen et al., “Performances of Silicon-Based Field-Emission Cathodes Coated with UltraNano Crystalline Diamond”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2117-2120. doi:10.18429/JACoW-IPAC2019-TUPTS084
[n] H. Saugnac et al., “CRYHOLAB, A New Horizontal Test Cryostat for SCRF Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP025, pp. 478-480.
[n] G. I. Cancelo, E. James, and S. A. Wolbers, “Digital Signal Processing the Tevatron BPM Signals”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT011, pp. 1242-1244.
[n] A. Basti et al., “Optimization of ILC Cryomodule Design Using Explosion Welding Technology”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 913-916. doi:10.18429/JACoW-IPAC2015-MOPHA052
[n] K. J. Bertsche, P. Emma, and O. A. Shevchenko, “A Simple, Low Cost Longitudinal Phase Space Diagnostic”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP037, pp. 2346-2348.
[n] J. N. Weaver et al., “Design Analysis and Measurement of Very Fast Kicker Magnets at SLAC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 411-414.
[n] F. Varela, M. Gonzalez-Berges, and N. Lurkin, “Reusing the Knowledge from the LHC Experiments to Implement the NA62 Run Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC064, pp. 725-728.
[n] B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3318-3320. doi:10.18429/JACoW-IPAC2015-WEPTY025
[n] V. Bailey et al., “An Experimental Program to Investigate the Strong Focussed, Spiral Line Recirculating Induction Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 920-923.
[n] D. Fonnesu et al., “CERN Based T_c Measurement Station for Thin-Film Coated Copper Samples and Results on Related Studies”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 105. doi:10.18429/JACoW-SRF2021-SUPFDV018
[n] G. L. Orlandi et al., “Characterization of Compressed Bunches in the SwissFEL Injector Test Facility”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF08, pp. 515-518.
[n] C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
[n] G. Doucas, M. Kimmitt, J. H. Mulvey, M. Omori, and J. Walsh, “First Observation of Smith-Purcell Radiation from Relativistic Electrons”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 632-635.
[n] B. Parker et al., “The SuperKEKB Interaction Region Corrector Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1193-1195. doi:10.18429/JACoW-IPAC2016-TUPMB041
[n] S. K. Esin, T. N. Habibullin, L. V. Kravchuk, V. V. Peplov, V. A. Puntus, and G. V. Romanov, “Adjustment of Meson Factory Linac 991-MHz Accelerating System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 506-509.
[n] D. Capatina et al., “APS 2-ID Beamline, Upgrade to Canted Configuration”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 342-344. doi:10.18429/JACoW-MEDSI2016-WEPE18
[n] F. Lenkszus et al., “Timing and Synchronization for the APS Short Pulse X-ray Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOAB01, pp. 1077-1079.
[n] A. I. Wawrzyniak et al., “Solaris Storage Ring Commissioning”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2895-2897. doi:10.18429/JACoW-IPAC2016-WEPOW029
[n] J-C. Tournier et al., “New Electrical Network Supervision for CERN: Simpler, Safer, Faster, and Including New Modern Features”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOBAB01, pp. 27-30.
[n] A. Tovar et al., “Validation of the Data Consolidation in Layout Database for the LHC Tunnel Cryogenics Controls Package”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC057, pp. 1197-1200.
[n] S. P. Kearney and D. Shu, “FE Model of a Nanopositioning Flexure Stage for Diagnosis of Trajectory Errors”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 179-183. doi:10.18429/JACoW-MEDSI2018-WEOAMA05
[n] W. B. Sampson, P. F. Dahl, S. Kiss, A. D. McInturff, and K. E. Robins, “ISABELLE Quadrupoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1296-1299.
[n] H. Lutz and D. Anicic, “Database Driven Control System Configuration for the PSI Proton Accelerator Facilities”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN022, pp. 289-291.
[n] P. Asboe-Hansen et al., “Acceleration and Stacking of Deuterons in the CERN PS and ISR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1557-1561.
[n] K. Yu, S. W. Quan, W. Xu, K. Zhao, F. Zhu, and J. Zhuang, “The PKU Terahertz Facility at Peking University”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP036, pp. 2343-2345.
[n] Y. Sato, “High Power Beam Operation of the J-PARC RCS and MR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2938-2942. doi:10.18429/JACoW-IPAC2018-THYGBF1
[n] L. David, E. Lecorche, T. T. Luong, and M. Ulrich, “The GANIL Computer Control System Renewal”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 830-833.
[n] C. S. Chou et al., “Drive Laser System for the NSRRC Photoinjector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP034, pp. 2337-2339.
[n] S. Buhler, A. Caruette, M. Fouaidy, and T. Junquera, “Activities on Cryostats and SRF Cavities at the IPN ORSAY Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I42, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- O. Mohsen et al., “Performances of Silicon-Based Field-Emission Cathodes Coated with UltraNano Crystalline Diamond”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2117-2120.
- H. Saugnac et al., “CRYHOLAB, A New Horizontal Test Cryostat for SCRF Cavities”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP025, pp. 478-480.
- G. I. Cancelo, E. James, and S. A. Wolbers, “Digital Signal Processing the Tevatron BPM Signals”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT011, pp. 1242-1244.
- A. Basti et al., “Optimization of ILC Cryomodule Design Using Explosion Welding Technology”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 913-916.
- K. J. Bertsche, P. Emma, and O. A. Shevchenko, “A Simple, Low Cost Longitudinal Phase Space Diagnostic”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP037, pp. 2346-2348.
- J. N. Weaver et al., “Design Analysis and Measurement of Very Fast Kicker Magnets at SLAC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 411-414.
- F. Varela, M. Gonzalez-Berges, and N. Lurkin, “Reusing the Knowledge from the LHC Experiments to Implement the NA62 Run Control”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC064, pp. 725-728.
- B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3318-3320.
- V. Bailey et al., “An Experimental Program to Investigate the Strong Focussed, Spiral Line Recirculating Induction Accelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 920-923.
- D. Fonnesu et al., “CERN Based T_c Measurement Station for Thin-Film Coated Copper Samples and Results on Related Studies”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 105.
- G. L. Orlandi et al., “Characterization of Compressed Bunches in the SwissFEL Injector Test Facility”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF08, pp. 515-518.
- C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
- G. Doucas, M. Kimmitt, J. H. Mulvey, M. Omori, and J. Walsh, “First Observation of Smith-Purcell Radiation from Relativistic Electrons”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 632-635.
- B. Parker et al., “The SuperKEKB Interaction Region Corrector Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1193-1195.
- S. K. Esin, T. N. Habibullin, L. V. Kravchuk, V. V. Peplov, V. A. Puntus, and G. V. Romanov, “Adjustment of Meson Factory Linac 991-MHz Accelerating System”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 506-509.
- D. Capatina et al., “APS 2-ID Beamline, Upgrade to Canted Configuration”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 342-344.
- F. Lenkszus et al., “Timing and Synchronization for the APS Short Pulse X-ray Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUOAB01, pp. 1077-1079.
- A. I. Wawrzyniak et al., “Solaris Storage Ring Commissioning”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2895-2897.
- J-C. Tournier et al., “New Electrical Network Supervision for CERN: Simpler, Safer, Faster, and Including New Modern Features”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOCOBAB01, pp. 27-30.
- A. Tovar et al., “Validation of the Data Consolidation in Layout Database for the LHC Tunnel Cryogenics Controls Package”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC057, pp. 1197-1200.
- S. P. Kearney and D. Shu, “FE Model of a Nanopositioning Flexure Stage for Diagnosis of Trajectory Errors”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 179-183.
- W. B. Sampson, P. F. Dahl, S. Kiss, A. D. McInturff, and K. E. Robins, “ISABELLE Quadrupoles”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1296-1299.
- H. Lutz and D. Anicic, “Database Driven Control System Configuration for the PSI Proton Accelerator Facilities”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN022, pp. 289-291.
- P. Asboe-Hansen et al., “Acceleration and Stacking of Deuterons in the CERN PS and ISR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1557-1561.
- K. Yu, S. W. Quan, W. Xu, K. Zhao, F. Zhu, and J. Zhuang, “The PKU Terahertz Facility at Peking University”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP036, pp. 2343-2345.
- Y. Sato, “High Power Beam Operation of the J-PARC RCS and MR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2938-2942.
- L. David, E. Lecorche, T. T. Luong, and M. Ulrich, “The GANIL Computer Control System Renewal”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 830-833.
- C. S. Chou et al., “Drive Laser System for the NSRRC Photoinjector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP034, pp. 2337-2339.
- S. Buhler, A. Caruette, M. Fouaidy, and T. Junquera, “Activities on Cryostats and SRF Cavities at the IPN ORSAY Laboratory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I42, pp. XX-XX.
Back to search