Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Wolski, “A New Lattice Design for the NLC Positron Pre-damping Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI030, pp. 521-523.
[n] N. Catalan-Lasheras, “Collimation Optimization in High Intensity Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPB001, pp. 424-428.
[n] R. A. Jameson, “Introduction to RFQ Session”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0002, pp. 49-52.
[n] H. Hahn, “Matrix Solution of Coupling Impedance in Multi-Layer Circular Cylindrical Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP082, pp. 3395-3397.
[n] M. L. Good, “The Fixed-Field, Rotating-Magnet Synchrotron or: Why Pluse?”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1061-1065.
[n] D. Sagan, “Detection of Coupling Elements in CESR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP5, pp. 2966-2968.
[n] H. Danared, “An Adiabatic Electron Gun for the CRYRING Electron Cooler”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1033-1035.
[n] R. Bartolini, M. Borland, and K. C. Harkay, “Plans for the Generation of Short Radiation Pulses at the Diamond Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH054, pp. 160-162.
[n] D. Still, I. Kourbanis, and D. Capista, “Tune Measurement Methods in the Fermilab Main Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P043, pp. 2061-2063.
[n] B. Rusnak, “High Intensity Proton Linacs”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95J01, pp. 752-752.
[n] D. A. Phelps and S. Somerstein, “Precision Intense Particle Beam Accelerators Using In-Situ Tuning Techniques”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3424-3427.
[n] S. Di Mitri, “How to Obtain High Quality Electron Bunches in the Presence of Normal Conducting LINAC Wake Fields”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THBAU03, pp. 537-544.
[n] T. H. Martin, “The Hydra Electron Beam Generator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 289-294.
[n] S. Yu, “Review of New Developments in the Field of Induction Accelerators (Electrons and Ions)”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TH103, pp. 597-604.
[n] J. Guo and S. G. Tantawi, “Active RF Pulse Compression Using Electrically Controlled Semiconductor Switches”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS040, pp. 2433-2435.
[n] D. A. Judd, L. J. Kettle, H. Menown, B. P. Newton, N. S. Nicholls, and R. Sheldrake, “Modern Thyratron Crowbar Protection Systems”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1600-1603.
[n] Y. Chen, S. Fu, Z. Huang, and Z. Zhang, “Nonlinear Space Charge Effect of Gaussian Type Bunched Beam in Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ25, pp. 3343-3345.
[n] Takashi Baba, “DESIGN OF A COMPACT FFAG ACCELERATOR WITH SPIRAL SECTOR MAGNET”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P13, pp. XX-XX.
[n] R. J. Bakker, “Status and Commissioning-Results of BESSY II”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUCL3, pp. 197-199.
[n] H. Tanaka, “HYBRID ACCELERATOR USING AN FFAG INJECTION SCHEME”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19C6, pp. XX-XX.
[n] T. Ohshima, S. Matsubara, H. Maesaka, and Y. Otake, “Variation of Beam Arrival Timing at SACLA”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD36, pp. 317-320.
[n] J.Hill, “A 2nd Generation Network Distributed Application Programming Interface for EPICS”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_096.
[n] Y. Zhang and J. Qiang, “Simulation Studies of Beam-Beam Effects of a Ring-Ring Electron-Ion Collider Based on CEBAF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP067, pp. 2653-2655.
[n] A. Walker and W. J. Gallagher, “Mechanical Limitations in High Average Power Linacs”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3125-3128.
[n] S. Belomestnykh, “Overview of input power coupler developments,pulsed and CW”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WE305, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Wolski, “A New Lattice Design for the NLC Positron Pre-damping Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI030, pp. 521-523.
- N. Catalan-Lasheras, “Collimation Optimization in High Intensity Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOPB001, pp. 424-428.
- R. A. Jameson, “Introduction to RFQ Session”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOB0002, pp. 49-52.
- H. Hahn, “Matrix Solution of Coupling Impedance in Multi-Layer Circular Cylindrical Structures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP082, pp. 3395-3397.
- M. L. Good, “The Fixed-Field, Rotating-Magnet Synchrotron or: Why Pluse?”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1061-1065.
- D. Sagan, “Detection of Coupling Elements in CESR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP5, pp. 2966-2968.
- H. Danared, “An Adiabatic Electron Gun for the CRYRING Electron Cooler”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1033-1035.
- R. Bartolini, M. Borland, and K. C. Harkay, “Plans for the Generation of Short Radiation Pulses at the Diamond Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH054, pp. 160-162.
- D. Still, I. Kourbanis, and D. Capista, “Tune Measurement Methods in the Fermilab Main Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P043, pp. 2061-2063.
- B. Rusnak, “High Intensity Proton Linacs”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95J01, pp. 752-752.
- D. A. Phelps and S. Somerstein, “Precision Intense Particle Beam Accelerators Using In-Situ Tuning Techniques”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3424-3427.
- S. Di Mitri, “How to Obtain High Quality Electron Bunches in the Presence of Normal Conducting LINAC Wake Fields”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THBAU03, pp. 537-544.
- T. H. Martin, “The Hydra Electron Beam Generator”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 289-294.
- S. Yu, “Review of New Developments in the Field of Induction Accelerators (Electrons and Ions)”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TH103, pp. 597-604.
- J. Guo and S. G. Tantawi, “Active RF Pulse Compression Using Electrically Controlled Semiconductor Switches”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS040, pp. 2433-2435.
- D. A. Judd, L. J. Kettle, H. Menown, B. P. Newton, N. S. Nicholls, and R. Sheldrake, “Modern Thyratron Crowbar Protection Systems”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1600-1603.
- Y. Chen, S. Fu, Z. Huang, and Z. Zhang, “Nonlinear Space Charge Effect of Gaussian Type Bunched Beam in Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ25, pp. 3343-3345.
- Takashi Baba, “DESIGN OF A COMPACT FFAG ACCELERATOR WITH SPIRAL SECTOR MAGNET”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P13, pp. XX-XX.
- R. J. Bakker, “Status and Commissioning-Results of BESSY II”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUCL3, pp. 197-199.
- H. Tanaka, “HYBRID ACCELERATOR USING AN FFAG INJECTION SCHEME”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19C6, pp. XX-XX.
- T. Ohshima, S. Matsubara, H. Maesaka, and Y. Otake, “Variation of Beam Arrival Timing at SACLA”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD36, pp. 317-320.
- J.Hill, “A 2nd Generation Network Distributed Application Programming Interface for EPICS”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_096.
- Y. Zhang and J. Qiang, “Simulation Studies of Beam-Beam Effects of a Ring-Ring Electron-Ion Collider Based on CEBAF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP067, pp. 2653-2655.
- A. Walker and W. J. Gallagher, “Mechanical Limitations in High Average Power Linacs”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3125-3128.
- S. Belomestnykh, “Overview of input power coupler developments,pulsed and CW”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WE305, pp. XX-XX.
Back to search