Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. D. Gilpatrick, S. Khan, and D. Kraemer, “Layout and Time-Domain Simulation of a Local Beam Position Feedback System for BESSY-II”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP002L, pp. 1839-1841.
[n] K. K??mpel, M. M?ñrcz, H. Podlech, A. R??ffer, C. Wagner, and S. R. Wagner, “Development and Test of a Program for Automatic Conditioning of Room Temperature Cavities”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2823-2825. doi:10.18429/JACoW-IPAC2022-THPOTK026
[n] C. Zhang et al., “Design of a Deuteron RFQ for Neutron Generation”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP10, pp. 312-314.
[n] F. Maimone et al., “Stable and Intense ⁴⁸Ca Ion Beam Production With a Microwave Shielded Oven and an Optical Spectrometer as Diagnostic Tool”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 50-53. doi:10.18429/JACoW-ECRIS2020-MOZZO03
[n] P. H. Baeta Neves Diniz Santos, “Status of the RFSoC-based Signal Processing for Multi-bunch and Filling Pattern Feedbacks in the SLS 2.0”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 297-300. doi:10.18429/JACoW-IBIC2023-TUP046
[n] R. M. Gilgenbach, Y. Y. Lau, and J. W. Luginsland, “Beam Breakup in an Annular Beam”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3354-3357.
[n] J. Martinez Marin and B. Mustapha, “Real-time Bayesian Optimization with Deep Kernel Learning and NN-Prior Mean for Accelerator Operations”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4420-4423. doi:10.18429/JACoW-IPAC2023-THPL004
[n] B. D. Muratori, M. A. Bowler, S. V. Miginsky, H. L. Owen, and S. L. Smith, “Lattice Design for the Fourth Generation Light Source at Daresbury Laboratory”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH069, pp. 184-186.
[n] L. Carlson, N. Ridlon, J. Seitz, and P. Hughes, “Multi-Kiloampere Electron-Beam Generation from Bare Aluminum Photo-Cathodes Driven by an ArF Laser”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W004, pp. 2826-2828.
[n] C. Gerth et al., “Start to End Simulations of the ERL Prototype at Daresbury Laboratory”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT019, pp. 1643-1645.
[n] N. Delerue, P. Burrows, R. Holland, E. M?®tral, L. Rinolfi, and M. Vretenar, “Challenge Based Innovation Accelerators for the Environment""”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3077-3079. doi:10.18429/JACoW-IPAC2022-THPOMS048
[n] A. V. Bulanov, S. V. Matsievskiy, E. A. Savin, and N. P. Sobenin, “Electron Beam Dynamics Calculation and Accelerating Structure Geometry Design in 10 MeV Hybrid Electron Linac”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 229-231. doi:10.18429/JACoW-RUPAC2016-TUPSA009
[n] Y. R. Lu et al., “Upgrade of 1-MeV Heavy Ion ISR RFQ Accelerator”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP043, pp. 139-141.
[n] M. Quinn, M. A. Bowler, A. MacDonald, and D. Roper, “Optical Systems for the Fourth Generation Light Source, 4GLS”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS47, pp. XX-XX.
[n] H. T. Ren et al., “Methods to Obtain High Intensity Proton Ion Beams with Low Emittance from ECR Ion Source at Peking University”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS021, pp. 3463-3465.
[n] J.-C. Denard, L. Cassinari, M. Dykes, and R. Smith, “Overview of the Diagnostics Systems of SOLEIL and DIAMOND”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper IT02, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- J. D. Gilpatrick, S. Khan, and D. Kraemer, “Layout and Time-Domain Simulation of a Local Beam Position Feedback System for BESSY-II”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP002L, pp. 1839-1841.
- K. K??mpel, M. M?ñrcz, H. Podlech, A. R??ffer, C. Wagner, and S. R. Wagner, “Development and Test of a Program for Automatic Conditioning of Room Temperature Cavities”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2823-2825.
- C. Zhang et al., “Design of a Deuteron RFQ for Neutron Generation”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP10, pp. 312-314.
- F. Maimone et al., “Stable and Intense ⁴⁸Ca Ion Beam Production With a Microwave Shielded Oven and an Optical Spectrometer as Diagnostic Tool”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOZZO03, pp. 50-53.
- P. H. Baeta Neves Diniz Santos, “Status of the RFSoC-based Signal Processing for Multi-bunch and Filling Pattern Feedbacks in the SLS 2.0”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TUP046, pp. 297-300.
- R. M. Gilgenbach, Y. Y. Lau, and J. W. Luginsland, “Beam Breakup in an Annular Beam”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3354-3357.
- J. Martinez Marin and B. Mustapha, “Real-time Bayesian Optimization with Deep Kernel Learning and NN-Prior Mean for Accelerator Operations”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL004, pp. 4420-4423.
- B. D. Muratori, M. A. Bowler, S. V. Miginsky, H. L. Owen, and S. L. Smith, “Lattice Design for the Fourth Generation Light Source at Daresbury Laboratory”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH069, pp. 184-186.
- L. Carlson, N. Ridlon, J. Seitz, and P. Hughes, “Multi-Kiloampere Electron-Beam Generation from Bare Aluminum Photo-Cathodes Driven by an ArF Laser”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W004, pp. 2826-2828.
- C. Gerth et al., “Start to End Simulations of the ERL Prototype at Daresbury Laboratory”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT019, pp. 1643-1645.
- N. Delerue, P. Burrows, R. Holland, E. M?®tral, L. Rinolfi, and M. Vretenar, “Challenge Based Innovation Accelerators for the Environment""”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3077-3079.
- A. V. Bulanov, S. V. Matsievskiy, E. A. Savin, and N. P. Sobenin, “Electron Beam Dynamics Calculation and Accelerating Structure Geometry Design in 10 MeV Hybrid Electron Linac”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 229-231.
- Y. R. Lu et al., “Upgrade of 1-MeV Heavy Ion ISR RFQ Accelerator”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP043, pp. 139-141.
- M. Quinn, M. A. Bowler, A. MacDonald, and D. Roper, “Optical Systems for the Fourth Generation Light Source, 4GLS”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS47, pp. XX-XX.
- H. T. Ren et al., “Methods to Obtain High Intensity Proton Ion Beams with Low Emittance from ECR Ion Source at Peking University”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS021, pp. 3463-3465.
- J.-C. Denard, L. Cassinari, M. Dykes, and R. Smith, “Overview of the Diagnostics Systems of SOLEIL and DIAMOND”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper IT02, pp. XX-XX.
Back to search