Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. N. Shaposhnikova et al., “Experimental Studies of Carbon Coatings as Possible Means of Suppressing Beam Induced Electron Multipacting in the CERN SPS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP008, pp. 366-368.
[n] A. Tauschwitz et al., “Beam Test of a Plasma Lens for Heavy Ion Beam Focusing”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 593-596.
[n] J. Beebe-Wang, F. A. Dilmanian, S. Peggs, D. J. Schlyer, and P. Vaska, “Feasibility of Positron Emission Tomography of Dose Distribution in Proton Beam Cancer Therapy”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI084, pp. 2721-2723.
[n] R. Warange et al., “SKA Synchronization and Timing Local Monitor Control - Project Status”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1582-1586. doi:10.18429/JACoW-ICALEPCS2017-THPHA085
[n] S. Henderson et al., “Beam Dump Window Design for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG020, pp. 1467-1469.
[n] H. Gassot et al., “Mechanical Stiffening of SRF Niobium Cavities by Thermal Sprayed Coating”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP024, pp. 472-477.
[n] Y. Cho, C. W. Potts, A. V. Rauchas, S.-A. Shin, and H. Takeda, “Study of RF Capture Process in the Argonne Rapid Cycling Synchrotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3040-3043.
[n] A. Beuret and F. Bordry, “The Control Loops of the High Power D. C. Power Converters of LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1197-1200.
[n] J. Resta-Lopez, A. Faus-Golfe, and F. Zimmermann, “LHC Impedance Reduction by Nonlinear Collimation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN085, pp. 1571-1573.
[n] E. Piselli, A. Akroh, S. Rothe, D. Leimbach, K. Blaum, and M. Door, “CERN Accelerators Beam Optimization Algorithm”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1383. doi:10.18429/JACoW-ICALEPCS2019-WEPHA124
[n] G. I. Batskikh, A. P. Fedotov, and B. P. Murin, “Linear Accelerator for Burner-Reactor”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH401, pp. 581-583.
[n] E. Boggasch et al., “Plasma Lenses for Heavy Ion Beam Focusing”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 596-599.
[n] X. Y. Zhang et al., “Preliminary Design of 325 MHz Half-Wave Resonator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO025, pp. 2369-2371.
[n] V. Karpenko et al., “Mechanical Design of Recirculating Accelerator Experiments for Heavy-Ion Fusion”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR17, pp. 837-839.
[n] N. Bultman, J. Billen, Z. Chen, M. Collier, D. Richards, and L. M. Young, “Fabrication and Tuning of the SNS CCL Hot Model”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB052, pp. 2844-2846.
[n] H. Reymond et al., “The Post-Mortem Analysis Software Used for the Electrical Circuit Commissioning of the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC151, pp. 3345-3347.
[n] G. C. Schneider, “A 1.5 GHz Wide-Band Beam-Position and Intensity Monitor for the Electron Positron Accumulator (EPA)”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 664-667.
[n] B. Ketenoglu et al., “The TAC IR FEL Oscillator Facility Project”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC38, pp. 580-582.
[n] S. Asaoka, T. Igarashi, G. Isoyama, A. Mikuni, Y. Miyahara, and H. Nishimura, “Present Status of SOR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2944-2947.
[n] J. Power, D. Barr, J. Gilpatrick, D. Martinez, R. Shurter, and M. Stettler, “Beam Current Measurements for LEDA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA164, pp. 2241-2243.
[n] H. Kraft and L. Perrot, “Beam Dynamics and Diagnostics for the High Energy Beam Transport Line of MINERVA Project at SCKÔÇóCEN”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2304-2306. doi:10.18429/JACoW-IPAC2019-WEPMP003
[n] J. J. Petillo et al., “The MICHELLE Electron Gun and Collector Modeling Tool”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH090, pp. 3054-3056.
[n] J. C. Garnier et al., “Reliable Software Development for Machine Protection Systems”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 489-491. doi:10.18429/JACoW-IPAC2014-MOPME050
[n] R. B. Fiorito and A. G. Shkvarunets Institute for Research in Electronics and Applied Physics, “Use of Optical Transition Radiation Interferometry for Energy Spread And Divergence Measurements”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM01, pp. XX-XX.
[n] D. E. Lobb, “Low Momentum Kaon Beam Lines”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2827-2830.
[n] X. Cao and D. Proch, “Transient Heat Conduction Analysis in Superconducting Cavities”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F12, pp. XX-XX.
[n] L. Perrot and R. Ollier, “Field-map and Beam Transport Calculations of the Magnetic Separator at ALTO Facility at Orsay”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 86-89. doi:10.18429/JACoW-IPAC2019-MOPGW011
[n] D. L. Friesel et al., “The Indiana University Midwest Proton Radiation Institute”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA004, pp. 645-647.
For LaTeX
Use Complete Form
For BibTeX
References
- E. N. Shaposhnikova et al., “Experimental Studies of Carbon Coatings as Possible Means of Suppressing Beam Induced Electron Multipacting in the CERN SPS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP008, pp. 366-368.
- A. Tauschwitz et al., “Beam Test of a Plasma Lens for Heavy Ion Beam Focusing”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 593-596.
- J. Beebe-Wang, F. A. Dilmanian, S. Peggs, D. J. Schlyer, and P. Vaska, “Feasibility of Positron Emission Tomography of Dose Distribution in Proton Beam Cancer Therapy”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI084, pp. 2721-2723.
- R. Warange et al., “SKA Synchronization and Timing Local Monitor Control - Project Status”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1582-1586.
- S. Henderson et al., “Beam Dump Window Design for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG020, pp. 1467-1469.
- H. Gassot et al., “Mechanical Stiffening of SRF Niobium Cavities by Thermal Sprayed Coating”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP024, pp. 472-477.
- Y. Cho, C. W. Potts, A. V. Rauchas, S.-A. Shin, and H. Takeda, “Study of RF Capture Process in the Argonne Rapid Cycling Synchrotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3040-3043.
- A. Beuret and F. Bordry, “The Control Loops of the High Power D. C. Power Converters of LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1197-1200.
- J. Resta-Lopez, A. Faus-Golfe, and F. Zimmermann, “LHC Impedance Reduction by Nonlinear Collimation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN085, pp. 1571-1573.
- E. Piselli, A. Akroh, S. Rothe, D. Leimbach, K. Blaum, and M. Door, “CERN Accelerators Beam Optimization Algorithm”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1383.
- G. I. Batskikh, A. P. Fedotov, and B. P. Murin, “Linear Accelerator for Burner-Reactor”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH401, pp. 581-583.
- E. Boggasch et al., “Plasma Lenses for Heavy Ion Beam Focusing”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 596-599.
- X. Y. Zhang et al., “Preliminary Design of 325 MHz Half-Wave Resonator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO025, pp. 2369-2371.
- V. Karpenko et al., “Mechanical Design of Recirculating Accelerator Experiments for Heavy-Ion Fusion”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR17, pp. 837-839.
- N. Bultman, J. Billen, Z. Chen, M. Collier, D. Richards, and L. M. Young, “Fabrication and Tuning of the SNS CCL Hot Model”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB052, pp. 2844-2846.
- H. Reymond et al., “The Post-Mortem Analysis Software Used for the Electrical Circuit Commissioning of the LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC151, pp. 3345-3347.
- G. C. Schneider, “A 1.5 GHz Wide-Band Beam-Position and Intensity Monitor for the Electron Positron Accumulator (EPA)”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 664-667.
- B. Ketenoglu et al., “The TAC IR FEL Oscillator Facility Project”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC38, pp. 580-582.
- S. Asaoka, T. Igarashi, G. Isoyama, A. Mikuni, Y. Miyahara, and H. Nishimura, “Present Status of SOR”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2944-2947.
- J. Power, D. Barr, J. Gilpatrick, D. Martinez, R. Shurter, and M. Stettler, “Beam Current Measurements for LEDA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA164, pp. 2241-2243.
- H. Kraft and L. Perrot, “Beam Dynamics and Diagnostics for the High Energy Beam Transport Line of MINERVA Project at SCKÔÇóCEN”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2304-2306.
- J. J. Petillo et al., “The MICHELLE Electron Gun and Collector Modeling Tool”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH090, pp. 3054-3056.
- J. C. Garnier et al., “Reliable Software Development for Machine Protection Systems”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 489-491.
- R. B. Fiorito and A. G. Shkvarunets Institute for Research in Electronics and Applied Physics, “Use of Optical Transition Radiation Interferometry for Energy Spread And Divergence Measurements”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM01, pp. XX-XX.
- D. E. Lobb, “Low Momentum Kaon Beam Lines”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2827-2830.
- X. Cao and D. Proch, “Transient Heat Conduction Analysis in Superconducting Cavities”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F12, pp. XX-XX.
- L. Perrot and R. Ollier, “Field-map and Beam Transport Calculations of the Magnetic Separator at ALTO Facility at Orsay”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 86-89.
- D. L. Friesel et al., “The Indiana University Midwest Proton Radiation Institute”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAA004, pp. 645-647.
Back to search