Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Bosco et al., “Modeling Short Range Wakefield Effects in a High Gradient Linac”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3185-3188. doi:10.18429/JACoW-IPAC2021-WEPAB238
[n] J. Rathke et al., “Design and Fabrication of an FEL Injector Cryomodule”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE067, pp. 3724-3726.
[n] S. Kronenberg, K. Desch, D. Elsner, P. Haenisch, and D. Proft, “Design of a new photo and thermionic hybrid mode 50 kV pulsed electron gun for ELSA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2186-2188. doi:10.18429/JACoW-IPAC2023-TUPL191
[n] A. G. Kobets et al., “Features of the Electronic Cooling System of the NICA Booster”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 236-238. doi:10.18429/JACoW-RuPAC2021-TUPSB04
[n] X. C. Ma et al., “Beam Instrumentation for Linear Accelerator of SKIF Synchrotron Light Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1016-1019. doi:10.18429/JACoW-IPAC2021-MOPAB328
[n] J. W. Wang, C. Pearson, R. D. Ruth, H. A. Hoag, H. Deruyter, and J. Schaefer, “Accelerator Structure Development for NLC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 907-910.
[n] A. Bignami, N. Gazis, and E. Trachanas, “Non-destructive & destructive testing on accelerator’s components and materials at the European Spallation Source”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2568-2571. doi:10.18429/JACoW-IPAC2025-THPB028
[n] V. B. Reva, M. I. Bryzgunov, and V. V. Parkhomchuk, “Features of the Pickup Diagnostic at Low Energy in the Cooler of NICA Booster”, in Proc. COOL'21, Novosibirsk, Russia, Nov. 2021, paper P2010, pp. 111-113.
[n] K. FEDOROV et al., “EPAC beamline Prototype: Development and optimisation of a high-repetition-rate LWFA system”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 78-82. doi:10.18429/JACoW-IBIC2025-MOPCO09
[n] L. P. Petrosyan, “Improving Perfomance of the MTCA System by use of PCI Express Non-Transparent Bridging and Point-To-Point PCI Express Transactions”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 479. doi:10.18429/JACoW-ICALEPCS2019-MOPHA112
[n] J. M. Arnesano and S. Döbert, “Design of an X-Band Bunching and Accelerating System for AWAKE Run 2”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 458-461. doi:10.18429/JACoW-LINAC2022-TUPOPA24
[n] Y. Vinokurov, E. Esarey, G. Penn, A. Sessler, A. Wolski, and J. S. Wurtele, “Beam Conditioning and FEL Studies Using MAD and Genesis”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper RPPT025, unpublished.
[n] S. Li, T. Liu, Q. Luo, and D. Zhou, “Beam-beam simulation with lattice and related researches of STCF”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS118, unpublished.
[n] B. Han et al., “Breaking through 100 mA H- ion source output current at SNS”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 1-4. doi:10.18429/JACoW-LINAC2024-MOYA001
[n] M. T. Switka, K. Desch, D. Elsner, and W. Hillert, “Beam Polarization Measurements with the Revised Compton Polarimeter at ELSA”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 137-139. doi:10.18429/JACoW-IBIC2022-MOP37
[n] P. Duval, J. Bobnar, M. Nikolova, J. Szczesny, J. T. Tempel, and S. Weisse, “TINE Release 5.0 : A First Look”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 77-79. doi:10.18429/JACoW-PCaPAC2018-WEP19
[n] H. Huang et al., “Quantifying effects of crab cavity RF phase noise on transverse emittance in EIC Hadron Storage Ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2399-2401. doi:10.18429/JACoW-IPAC2023-TUPM084
[n] E. Trachanas, A. Bignami, N. Gazis, and B. Jones, “ESS RFQ Experimental Modal Analysis”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2907-2910. doi:10.18429/JACoW-IPAC2022-THPOTK057
[n] J. Bernardini et al., “Final Design of the Pre-Production SSR2 Cryomodule for PIP-II Project at Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 511-514. doi:10.18429/JACoW-LINAC2022-TUPOGE12
[n] J. Kim, X. Huang, P. Raimondi, J. A. Safranek, M. Song, and K. Tian, “A Hybrid Multi-Bend Achromat Lattice Design for SSRL-X”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 207-209. doi:10.18429/JACoW-IPAC2022-MOPOST054
[n] D. Franklin, T. Arias, O. Chubenko, and T. Wu, “Studying photoemissive properties of stable Cs-Sb compound thin-film photocathodes using a combination of Monte Carlo simulations and Density Functional Theory”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1263-1265. doi:10.18429/JACoW-IPAC2025-TUPM049
[n] L. Shpani, C. Wang, H. Lew-Kiedrowska, M. Liepe, S. Sibener, and V. Do, “Advancements in Nb_3Sn growth for SRF technology”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 84-86. doi:10.18429/JACoW-LINAC2024-MOPB023
[n] T. T. Nakamura et al., “The Upgrade Status of the SuperKEKB Magnet Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA106, pp. XX-XX.
[n] E. Trachanas, A. Bignami, and N. Gazis, “Studying the properties of particle accelerator cavity materials”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR79, unpublished.
[n] F. C. Pilat, Y. Luo, N. Malitsky, and V. Ptitsyn, “Beam-Based Nonlinear Optics Corrections in Colliders”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WOAC007, pp. 601-605.
[n] J. Kim, J. A. Safranek, and K. Tian, “Transverse Resonance Islands Buckets at SPEAR3”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 203-206. doi:10.18429/JACoW-IPAC2022-MOPOST053
[n] P. A. P. Nghiem et al., “EuPRAXIA, a Step Toward a Plasma-Wakefield Based Accelerator With High Beam Quality”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2291-2295. doi:10.18429/JACoW-IPAC2019-WEZZPLS2
[n] C. H. Chang, T. C. Fan, I. Hsu, C. S. Hwang, and Ch. Wang, “Magnet Sorting Algorithms for the SRRC EPU5.6”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP31G, pp. 2219-2221.
[n] T. Hellert et al., “Status of the Advanced Light Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1309-1312. doi:10.18429/JACoW-IPAC2024-TUPG37
[n] K. V. Astrelina and F. A. Emanov, “Consideration the Prospects of Beam Diagnostic System Upgrade in the Transport Channels of Injection Complex VEPP-5”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 860-862. doi:10.18429/JACoW-IPAC2021-MOPAB272
[n] S. I. Sharamentov, M. Bogaty, E. Clifft, and R. C. Pardo, “Upgrade of the ATLAS Positive Ion Injector Bunching System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT030, pp. 2161-2163.
[n] H. Sugimura et al., “Injection and Extraction Timing Controls at SuperKEKB Damping Ring”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 201-203. doi:10.18429/JACoW-PCaPAC2018-THP17
[n] N. A. Vinokurov, V. V. Parkhomchuk, and A. N. Skrinsky, “RF Accelerator for Electron Cooling of Ultrarelativistic Hadrons”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 26-28. doi:10.18429/JACoW-COOL2019-TUY01
[n] C. Spezzani et al., “FERMI upgrade to Echo Enabled Harmonic Generation”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL035, unpublished.
[n] S. Ogur et al., “Preliminary Design of FCC-ee Pre-Injector Complex”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1337-1340. doi:10.18429/JACoW-IPAC2017-TUPAB014
[n] M. T. Switka, K. Desch, T. J. Gereons, S. Kronenberg, D. Proft, and A. Spreitzer, “Progress on Distributed Image Analysis from Digital Cameras at ELSA using the RabbitMQ Message Broker”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 449-452. doi:10.18429/JACoW-IBIC2023-WEP046
[n] D. Proft, K. Desch, D. Elsner, and M. T. Switka, “Upgrade of the 25 MW RF Station for the Linear Accelerator LINAC2 at ELSA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 838-840. doi:10.18429/JACoW-IPAC2022-TUPOST002
[n] P. Van Trappen, E. Carlier, M. Gauthier, N. Magnin, E. J. Oltedal, and J. Schipper, “SoC Technology for Embedded Control and Interlocking Within Fast Pulsed Systems at CERN”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 593. doi:10.18429/JACoW-ICALEPCS2019-MOPHA153
[n] J. F. Schmerge, J. M. Castro, J. E. Clendenin, D. H. Dowell, S. M. Gierman, and R. O. Hettel, “Emittance and Quantum Efficiency Measurements from a 1.6 cell S-band Photocathode RF Gun with Mg Cathode”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS64, pp. XX-XX.
[n] M. L. Chen et al., “Measurement of Beam Size with a SR Interferometer in TPS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 313-315. doi:10.18429/JACoW-IPAC2016-MOPMR032
[n] Y. D. Chernousov, “Development of RF Accelerator on Parallel-Coupled Structure - Trend in Accelerator Technique”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 220-222. doi:10.18429/JACoW-RUPAC2016-TUPSA006
[n] V. V. Kushin and S. V. Plotnikov, “Space Lattice Focusing: On the Way to Extremely Low Accelerated Beam Divergence”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA75, pp. 3564-3566.
[n] E. J. Minehara, A. Nisimura, and T. Tsukada, “Preparation Femtosecond Laser Prevention for the Cold-Worked Stress Corrosion Crackings on Reactor Grade Low Carbon Stainless Steel”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THBOS02, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Bosco et al., “Modeling Short Range Wakefield Effects in a High Gradient Linac”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3185-3188.
- J. Rathke et al., “Design and Fabrication of an FEL Injector Cryomodule”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE067, pp. 3724-3726.
- S. Kronenberg, K. Desch, D. Elsner, P. Haenisch, and D. Proft, “Design of a new photo and thermionic hybrid mode 50 kV pulsed electron gun for ELSA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL191, pp. 2186-2188.
- A. G. Kobets et al., “Features of the Electronic Cooling System of the NICA Booster”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 236-238.
- X. C. Ma et al., “Beam Instrumentation for Linear Accelerator of SKIF Synchrotron Light Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1016-1019.
- J. W. Wang, C. Pearson, R. D. Ruth, H. A. Hoag, H. Deruyter, and J. Schaefer, “Accelerator Structure Development for NLC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 907-910.
- A. Bignami, N. Gazis, and E. Trachanas, “Non-destructive & destructive testing on accelerator’s components and materials at the European Spallation Source”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB028, pp. 2568-2571.
- V. B. Reva, M. I. Bryzgunov, and V. V. Parkhomchuk, “Features of the Pickup Diagnostic at Low Energy in the Cooler of NICA Booster”, in Proc. 13th Workshop on Beam Cooling and Related Topics (COOL'21), Novosibirsk, Russia, Nov. 2021, paper P2010, pp. 111-113.
- K. FEDOROV et al., “EPAC beamline Prototype: Development and optimisation of a high-repetition-rate LWFA system”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 78-82.
- L. P. Petrosyan, “Improving Perfomance of the MTCA System by use of PCI Express Non-Transparent Bridging and Point-To-Point PCI Express Transactions”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 479.
- J. M. Arnesano and S. Döbert, “Design of an X-Band Bunching and Accelerating System for AWAKE Run 2”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 458-461.
- Y. Vinokurov, E. Esarey, G. Penn, A. Sessler, A. Wolski, and J. S. Wurtele, “Beam Conditioning and FEL Studies Using MAD and Genesis”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT025, unpublished.
- S. Li, T. Liu, Q. Luo, and D. Zhou, “Beam-beam simulation with lattice and related researches of STCF”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS118, unpublished.
- B. Han et al., “Breaking through 100 mA H- ion source output current at SNS”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 1-4.
- M. T. Switka, K. Desch, D. Elsner, and W. Hillert, “Beam Polarization Measurements with the Revised Compton Polarimeter at ELSA”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 137-139.
- P. Duval, J. Bobnar, M. Nikolova, J. Szczesny, J. T. Tempel, and S. Weisse, “TINE Release 5.0 : A First Look”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 77-79.
- H. Huang et al., “Quantifying effects of crab cavity RF phase noise on transverse emittance in EIC Hadron Storage Ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM084, pp. 2399-2401.
- E. Trachanas, A. Bignami, N. Gazis, and B. Jones, “ESS RFQ Experimental Modal Analysis”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2907-2910.
- J. Bernardini et al., “Final Design of the Pre-Production SSR2 Cryomodule for PIP-II Project at Fermilab”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 511-514.
- J. Kim, X. Huang, P. Raimondi, J. A. Safranek, M. Song, and K. Tian, “A Hybrid Multi-Bend Achromat Lattice Design for SSRL-X”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 207-209.
- D. Franklin, T. Arias, O. Chubenko, and T. Wu, “Studying photoemissive properties of stable Cs-Sb compound thin-film photocathodes using a combination of Monte Carlo simulations and Density Functional Theory”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM049, pp. 1263-1265.
- L. Shpani, C. Wang, H. Lew-Kiedrowska, M. Liepe, S. Sibener, and V. Do, “Advancements in Nb_3Sn growth for SRF technology”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 84-86.
- T. T. Nakamura et al., “The Upgrade Status of the SuperKEKB Magnet Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA106, pp. XX-XX.
- E. Trachanas, A. Bignami, and N. Gazis, “Studying the properties of particle accelerator cavity materials”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR79, unpublished.
- F. C. Pilat, Y. Luo, N. Malitsky, and V. Ptitsyn, “Beam-Based Nonlinear Optics Corrections in Colliders”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WOAC007, pp. 601-605.
- J. Kim, J. A. Safranek, and K. Tian, “Transverse Resonance Islands Buckets at SPEAR3”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 203-206.
- P. A. P. Nghiem et al., “EuPRAXIA, a Step Toward a Plasma-Wakefield Based Accelerator With High Beam Quality”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2291-2295.
- C. H. Chang, T. C. Fan, I. Hsu, C. S. Hwang, and Ch. Wang, “Magnet Sorting Algorithms for the SRRC EPU5.6”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP31G, pp. 2219-2221.
- T. Hellert et al., “Status of the Advanced Light Source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG37, pp. 1309-1312.
- K. V. Astrelina and F. A. Emanov, “Consideration the Prospects of Beam Diagnostic System Upgrade in the Transport Channels of Injection Complex VEPP-5”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 860-862.
- S. I. Sharamentov, M. Bogaty, E. Clifft, and R. C. Pardo, “Upgrade of the ATLAS Positive Ion Injector Bunching System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT030, pp. 2161-2163.
- H. Sugimura et al., “Injection and Extraction Timing Controls at SuperKEKB Damping Ring”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 201-203.
- N. A. Vinokurov, V. V. Parkhomchuk, and A. N. Skrinsky, “RF Accelerator for Electron Cooling of Ultrarelativistic Hadrons”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 26-28.
- C. Spezzani et al., “FERMI upgrade to Echo Enabled Harmonic Generation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL035, unpublished.
- S. Ogur et al., “Preliminary Design of FCC-ee Pre-Injector Complex”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1337-1340.
- M. T. Switka, K. Desch, T. J. Gereons, S. Kronenberg, D. Proft, and A. Spreitzer, “Progress on Distributed Image Analysis from Digital Cameras at ELSA using the RabbitMQ Message Broker”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP046, pp. 449-452.
- D. Proft, K. Desch, D. Elsner, and M. T. Switka, “Upgrade of the 25 MW RF Station for the Linear Accelerator LINAC2 at ELSA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 838-840.
- P. Van Trappen, E. Carlier, M. Gauthier, N. Magnin, E. J. Oltedal, and J. Schipper, “SoC Technology for Embedded Control and Interlocking Within Fast Pulsed Systems at CERN”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 593.
- J. F. Schmerge, J. M. Castro, J. E. Clendenin, D. H. Dowell, S. M. Gierman, and R. O. Hettel, “Emittance and Quantum Efficiency Measurements from a 1.6 cell S-band Photocathode RF Gun with Mg Cathode”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS64, pp. XX-XX.
- M. L. Chen et al., “Measurement of Beam Size with a SR Interferometer in TPS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 313-315.
- Y. D. Chernousov, “Development of RF Accelerator on Parallel-Coupled Structure - Trend in Accelerator Technique”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 220-222.
- V. V. Kushin and S. V. Plotnikov, “Space Lattice Focusing: On the Way to Extremely Low Accelerated Beam Divergence”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA75, pp. 3564-3566.
- E. J. Minehara, A. Nisimura, and T. Tsukada, “Preparation Femtosecond Laser Prevention for the Cold-Worked Stress Corrosion Crackings on Reactor Grade Low Carbon Stainless Steel”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THBOS02, pp. XX-XX.
Back to search