Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. D. Hay and H. Winick, “Experience with Metal and Epoxy Vacuum Chambers and the Development of Alumina Ceramic Vacuum Chambers at the CEA”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 815-821.
[n] S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583.
[n] G. A. Smith et al., “The Design and Packaging of the Instrumentation Electronics for the AGS Booster, A Generic Approach”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1264-1267.
[n] M. Uesaka, T. Hosokai, K. Kinoshita, and A. Zhidkov, “Generation of Femtosecond Electron Bunches and Hard-X-Rays by Ultra-Intense Laser Wake Field Acceleration in a Gas Jet”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB090, pp. 2258-2260.
[n] L. Dovlatyan, T. M. Antonsen, B. L. Beaudoin, I. Haber, D. B. Matthew, and K. J. Ruisard, “Preliminary Lattice Studies for the Single-Invariant Optics Experiment at the University of Maryland”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 367-370. doi:10.18429/JACoW-IPAC2019-MOPGW105
[n] D. J. Clark et al., “Design and Construction of the Axial Injection System for the 88 - Inch Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 471-474.
[n] A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP10, pp. XX-XX.
[n] Y. Hirao, “Injection into the Accumulation Ring from the INS-SF Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-27, pp. 477-479.
[n] H. Shi et al., “Fast Kicker and Pulser R&D for the HEPS on-Axis Injection System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2846-2849. doi:10.18429/JACoW-IPAC2018-WEPML069
[n] A. Friedman, R. J. Briggs, D. P. Grote, E. Henestroza, and W. L. Waldron, “Modeling the Pulse Line Ion Accelerator (PLIA): An Algorithm for Quasi-Static Field Solution”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS016, pp. 2364-2366.
[n] F. W. Jones, W. Herr, and T. Pieloni, “Self-Consistent Parallel Multi Bunch Beam-Beam Simulation Using a Grid-Multipole Method”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP074, pp. 4482-4484.
[n] E. Chishiro et al., “Development of 972 MHz Klystron for High-Intensity Proton Accelerator Facility”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU459, pp. 455-457.
[n] V. Schlott et al., “Commissioning of the SLS Digital BPM System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH134, pp. 2397-2399.
[n] F. Schmidt, I. V. Agapov, W. Herr, G. Kruk, and M. Lamont, “LHC On-Line Modeling”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN071, pp. 3384-3386.
[n] N. A. Vinokurov et al., “NOVOSIBIRSK FREE ELECTRON LASER: OPERATION AND SECOND STAGE COMMISSIONING”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDAU01, pp. 181-184.
[n] R. M. Hutcheon et al., “A Continuing Study of RF Conditioning and RF Voltage Limits of the Four-Rod RFQ Configuration”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1794-1797.
[n] Z. Patel et al., “Insertion Devices at Diamond Light Source: A Retrospective Plus Future Developments”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1592-1595. doi:10.18429/JACoW-IPAC2017-TUPAB116
[n] T. Shaftan, H. Loos, B. Sheehy, and L. H. Yu, “Preliminary Measurements of the High-Gain FEL Radiation Properties along the Radiator”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS62, pp. XX-XX.
[n] S. Reimann, M. Droba, O. Meusel, and H. Podlech, “An Algorithm for Automated Lattice Design of Transfer Lines”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 127-130. doi:10.18429/JACoW-IPAC2019-MOPGW023
[n] C. Travier, J. Gao, and H. Liu, “LAL (Orsay) RF Gun Simulations and Model Cavity Design”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH408, pp. 602-604.
[n] T. Oulevey et al., “An Update on the CERN Journey from Bare Metal to Orchestrated Containerization for Controls”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1138-1144. doi:10.18429/JACoW-ICALEPCS2023-TH2AO03
[n] G. B. Sharkov, A. A. Krasnov, S. A. Polikhov, R. Cisneros, and R. J. Patrick, “100 kW Very Compact Pulsed Solid-State RF Amplifier. Development and Tests”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 873-876. doi:10.18429/JACoW-NAPAC2016-WEB4CO04
For LaTeX
Use Complete Form
For BibTeX
References
- R. D. Hay and H. Winick, “Experience with Metal and Epoxy Vacuum Chambers and the Development of Alumina Ceramic Vacuum Chambers at the CEA”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 815-821.
- S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583.
- G. A. Smith et al., “The Design and Packaging of the Instrumentation Electronics for the AGS Booster, A Generic Approach”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1264-1267.
- M. Uesaka, T. Hosokai, K. Kinoshita, and A. Zhidkov, “Generation of Femtosecond Electron Bunches and Hard-X-Rays by Ultra-Intense Laser Wake Field Acceleration in a Gas Jet”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB090, pp. 2258-2260.
- L. Dovlatyan, T. M. Antonsen, B. L. Beaudoin, I. Haber, D. B. Matthew, and K. J. Ruisard, “Preliminary Lattice Studies for the Single-Invariant Optics Experiment at the University of Maryland”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 367-370.
- D. J. Clark et al., “Design and Construction of the Axial Injection System for the 88 - Inch Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 471-474.
- A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP10, pp. XX-XX.
- Y. Hirao, “Injection into the Accumulation Ring from the INS-SF Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-27, pp. 477-479.
- H. Shi et al., “Fast Kicker and Pulser R&D for the HEPS on-Axis Injection System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2846-2849.
- A. Friedman, R. J. Briggs, D. P. Grote, E. Henestroza, and W. L. Waldron, “Modeling the Pulse Line Ion Accelerator (PLIA): An Algorithm for Quasi-Static Field Solution”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS016, pp. 2364-2366.
- F. W. Jones, W. Herr, and T. Pieloni, “Self-Consistent Parallel Multi Bunch Beam-Beam Simulation Using a Grid-Multipole Method”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP074, pp. 4482-4484.
- E. Chishiro et al., “Development of 972 MHz Klystron for High-Intensity Proton Accelerator Facility”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU459, pp. 455-457.
- V. Schlott et al., “Commissioning of the SLS Digital BPM System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH134, pp. 2397-2399.
- F. Schmidt, I. V. Agapov, W. Herr, G. Kruk, and M. Lamont, “LHC On-Line Modeling”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN071, pp. 3384-3386.
- N. A. Vinokurov et al., “NOVOSIBIRSK FREE ELECTRON LASER: OPERATION AND SECOND STAGE COMMISSIONING”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDAU01, pp. 181-184.
- R. M. Hutcheon et al., “A Continuing Study of RF Conditioning and RF Voltage Limits of the Four-Rod RFQ Configuration”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1794-1797.
- Z. Patel et al., “Insertion Devices at Diamond Light Source: A Retrospective Plus Future Developments”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1592-1595.
- T. Shaftan, H. Loos, B. Sheehy, and L. H. Yu, “Preliminary Measurements of the High-Gain FEL Radiation Properties along the Radiator”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS62, pp. XX-XX.
- S. Reimann, M. Droba, O. Meusel, and H. Podlech, “An Algorithm for Automated Lattice Design of Transfer Lines”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 127-130.
- C. Travier, J. Gao, and H. Liu, “LAL (Orsay) RF Gun Simulations and Model Cavity Design”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH408, pp. 602-604.
- T. Oulevey et al., “An Update on the CERN Journey from Bare Metal to Orchestrated Containerization for Controls”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TH2AO03, pp. 1138-1144.
- G. B. Sharkov, A. A. Krasnov, S. A. Polikhov, R. Cisneros, and R. J. Patrick, “100 kW Very Compact Pulsed Solid-State RF Amplifier. Development and Tests”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 873-876.
Back to search