Favourites
For Word
[n] B. Dhital et al., “An automated quad scan based emittance measurement software”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3453-3456. doi:10.18429/JACoW-IPAC2024-THPG79
[n] W. Leonhardt et al., “Thermal Management of Magnetic Focussing Horns Used in the Narrow and Broad Band Neutrino Beams at the AGS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1740-1743.
[n] T. N. Khabiboulline et al., “High Gradient Test Results of 325 MHz Single Spoke Cavity at Fermilab”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP030, pp. 851-853.
[n] S. De Santis, J. F. Beche, J. M. Byrd, M. Placidi, W. C. Turner, and M. S. Zolotorev, “Development of an Abort Gap Monitor for the Large Hadron Collider”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT143, pp. 2792-2794.
[n] J. Dietrich, D. Husmann, J. Keil, R. Maier, and I. Mohos, “The New Beam Position Monitoring System of ELSA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP16F, pp. 1544-1546.
[n] R. T. Avery, G. R. Lamertson, and C. D. Pike, “Printed-Circuit Steering Coils”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 885-887.
[n] N. Tokuda, M. Tobizawa, Y. Arakaki, S. Machida, Y. Mori, and T. Watanabe, “Design Study of the Slow-Extraction System for the JHF 50-GeV Main Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D005, pp. 387-389.
[n] Y. Papaphilippou et al., “Design Options of a High-power Proton Synchrotron for LAGUNA-LBNO”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO081, pp. 3948-3950.
[n] K. H. Mess and M. Seidel, “Measurement of Proton Beam Oscillations at Low Frequencies”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1731-1734.
[n] S. Lange, M. Clemens, M. Dohlus, L. O. Fichte, and T. Limberg, “Numerical Minimization of Longitudinal Emittance in Linac Structures”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUPPP23, pp. 124-127.
[n] K. Seiya et al., “Flattening the field during injection in the Fermilab booster using dipole corrector magnets”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1014-1016. doi:10.18429/JACoW-IPAC2024-TUPC09
[n] G. Bisoffi et al., “A Cost-Effective Energy Upgrade of the ALPI Linac at INFN-Legnaro”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper TUA02, pp. 106-111.
[n] M. Scholz and B. Beutner, “Electron Beam Phase Space Tomographie at the European XFEL Injector”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 515-518. doi:10.18429/JACoW-FEL2015-TUP068
[n] M. Laverty, K. Fong, and S. Fang, “Design and Testing of the ISAC RFQ Control System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP94, pp. 890-892.
[n] J.-P. Jensen, “European XFEL Cooling and Ventilation Systems”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 257-259. doi:10.18429/JACoW-LINAC2018-MOPO122
[n] D. Jeon and J. Stovall, “SNS Linac Commissioning - Transverse Matching”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG027, pp. 2652-2654.
[n] K. Kan et al., “Beam Dynamics in Femtosecond Photocathode RF Gun”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC027, pp. 4107-4109.
[n] D.-J. Wang, J.-R. Chen, and C. K. Kuan, “Mechanical Induced Beam Motion in SRRC Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH118, pp. 1485-1487.
[n] T. Sieber et al., “Intensity and Profile Measurement for Low Intensity Ion Beams in an Electrostatic Cryogenic Storage Ring”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper WEOA02, pp. 418-420.
[n] G. Fischerauer and T. Weiland, “Three Dimensional Computer Design of Multi-Cell Accelerating Cavities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 931-934.
[n] X. He, X. Wang, and F. Zhao, “A Newly Developed High Directivity X-band Waveguide Directional Coupler”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI023, pp. 3345-3347.
[n] R. E. Laxdal et al., “Superconducting Accelerator Activities at TRIUMF/ISAC”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU477, pp. 497-499.
[n] W. J. M. Weterings, C. Bracco, L. O. Jorat, M. Meddahi, R. Noulibos, and P. Van Trappen, “The New Injection Region of the CERN PS Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2414-2417. doi:10.18429/JACoW-IPAC2019-WEPMP039
For LaTeX
Use Complete Form
For BibTeX
References
- B. Dhital et al., “An automated quad scan based emittance measurement software”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG79, pp. 3453-3456.
- W. Leonhardt et al., “Thermal Management of Magnetic Focussing Horns Used in the Narrow and Broad Band Neutrino Beams at the AGS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1740-1743.
- T. N. Khabiboulline et al., “High Gradient Test Results of 325 MHz Single Spoke Cavity at Fermilab”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP030, pp. 851-853.
- S. De Santis, J. F. Beche, J. M. Byrd, M. Placidi, W. C. Turner, and M. S. Zolotorev, “Development of an Abort Gap Monitor for the Large Hadron Collider”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT143, pp. 2792-2794.
- J. Dietrich, D. Husmann, J. Keil, R. Maier, and I. Mohos, “The New Beam Position Monitoring System of ELSA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP16F, pp. 1544-1546.
- R. T. Avery, G. R. Lamertson, and C. D. Pike, “Printed-Circuit Steering Coils”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 885-887.
- N. Tokuda, M. Tobizawa, Y. Arakaki, S. Machida, Y. Mori, and T. Watanabe, “Design Study of the Slow-Extraction System for the JHF 50-GeV Main Ring”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D005, pp. 387-389.
- Y. Papaphilippou et al., “Design Options of a High-power Proton Synchrotron for LAGUNA-LBNO”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO081, pp. 3948-3950.
- K. H. Mess and M. Seidel, “Measurement of Proton Beam Oscillations at Low Frequencies”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1731-1734.
- S. Lange, M. Clemens, M. Dohlus, L. O. Fichte, and T. Limberg, “Numerical Minimization of Longitudinal Emittance in Linac Structures”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUPPP23, pp. 124-127.
- K. Seiya et al., “Flattening the field during injection in the Fermilab booster using dipole corrector magnets”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC09, pp. 1014-1016.
- G. Bisoffi et al., “A Cost-Effective Energy Upgrade of the ALPI Linac at INFN-Legnaro”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper TUA02, pp. 106-111.
- M. Scholz and B. Beutner, “Electron Beam Phase Space Tomographie at the European XFEL Injector”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 515-518.
- M. Laverty, K. Fong, and S. Fang, “Design and Testing of the ISAC RFQ Control System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP94, pp. 890-892.
- J.-P. Jensen, “European XFEL Cooling and Ventilation Systems”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 257-259.
- D. Jeon and J. Stovall, “SNS Linac Commissioning - Transverse Matching”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG027, pp. 2652-2654.
- K. Kan et al., “Beam Dynamics in Femtosecond Photocathode RF Gun”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC027, pp. 4107-4109.
- D.-J. Wang, J.-R. Chen, and C. K. Kuan, “Mechanical Induced Beam Motion in SRRC Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH118, pp. 1485-1487.
- T. Sieber et al., “Intensity and Profile Measurement for Low Intensity Ion Beams in an Electrostatic Cryogenic Storage Ring”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper WEOA02, pp. 418-420.
- G. Fischerauer and T. Weiland, “Three Dimensional Computer Design of Multi-Cell Accelerating Cavities”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 931-934.
- X. He, X. Wang, and F. Zhao, “A Newly Developed High Directivity X-band Waveguide Directional Coupler”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI023, pp. 3345-3347.
- R. E. Laxdal et al., “Superconducting Accelerator Activities at TRIUMF/ISAC”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU477, pp. 497-499.
- W. J. M. Weterings, C. Bracco, L. O. Jorat, M. Meddahi, R. Noulibos, and P. Van Trappen, “The New Injection Region of the CERN PS Booster”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2414-2417.
Back to search