Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Y. Chang et al., “Modular Type Quick Splicing Method for TPS Beamline Radiation Shielding Hutch”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2252-2255. doi:10.18429/JACoW-IPAC2021-TUPAB323
[n] D. Zangrando et al., “A Superconducting 3.5 T Multipole Wiggler for the ELETTRA Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE044, pp. 2634-2636.
[n] M. Z. Tuo et al., “Beam Dynamics Design of a Synchrotron Injector with Laser-Accelerated Ions”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3085-3088. doi:10.18429/JACoW-IPAC2021-WEPAB198
[n] M. Tobiyama, T. Kasuga, T. Katsura, T. Obina, and T. Takeo, “Measurement of Bunch Time-Structure in KEK PF”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1338-1341.
[n] D. Wang, J. Liu, and X. L. Wang, “Research on Fault Diagnosis of Power Supply Control System on BEPCII”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 361-364. doi:10.18429/JACoW-ICALEPCS2017-TUPHA001
[n] C. Bruno, N. Camarcat, J. Cortella, C. Patou, and B. Tournier, “Pulsed Neutron Source from the Intense Particle Beam Generator THALIE”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3139-3142.
[n] G. Wang et al., “Path to high current 500 mA at NSLS-II”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG13, unpublished.
[n] B. Spaniol and W. C. Heraeus GmbH, “quot;Oligo-crystalinquot; Niobium / Large Grain Niobium Discs, Directly Cut from Ingot”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH163, pp. 0-3645.
[n] S. Fukuda et al., “Development of a High-Power VHF Klystron for JHF”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D015, pp. 112-114.
[n] V. Kushin et al., “Details of the Initial Part of the Tungsten Ion Linac for Particle Track Membranes Production”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAC05, pp. 140-142.
[n] A. X. Wang et al., “The Deformation-Stress Simulation and Measurement of Titanium Foil Strip for Hadron Monitor”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4187-4189. doi:10.18429/JACoW-IPAC2019-THPTS037
[n] L. Kang et al., “Introduction About Key Techniques of Critical Equipment in CSNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4548-4550. doi:10.18429/JACoW-IPAC2017-THPVA049
[n] M. Zhong, C.-X. Tang, and S. X. Zheng, “The Primary Experiment of Multipactor Electron Gun Based Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP091, pp. 4990-4992.
[n] G. X. Xia, M. Ivanyan, K. Manukyan, K. A. Sargsyan, and R. Wanzenberg, “Ion Effect Issues in PETRA III”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP073, pp. 3371-3373.
[n] N. Simos, N. Catalan-Lasheras, S. Crivello, and H. Ludewig, “Double-Wall Collimator Design of the SNS Project”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH084, pp. 1405-1407.
[n] J. Tang, J. F. Chen, and Y. Zou, “Momentum Collimation in a High-intensity Compact Rapid Cycling Proton Synchrotron”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD66, pp. 254-258.
[n] L. M. Sevryukova, A. I. Ageev, V. V. Alimov, and O. A. Voinalovich, “Development of Production Technology for Weldless Copper Shells of SC Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I27, pp. XX-XX.
[n] L. Wu, S. Y. Chen, C. H. Li, H. Qu, H. J. Wang, and X. L. Wang, “Research Development of High Precision Installation and Alignment System for HEPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2924-2926. doi:10.18429/JACoW-IPAC2015-WEPMN007
[n] A. Valentinov et al., “FIRST RESULTS OF SIBERIA-2 STORAGE RING OPERATION WITH 7.5 T SUPERCONDUCTING WIGGLER”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDAU02, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Y. Chang et al., “Modular Type Quick Splicing Method for TPS Beamline Radiation Shielding Hutch”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2252-2255.
- D. Zangrando et al., “A Superconducting 3.5 T Multipole Wiggler for the ELETTRA Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE044, pp. 2634-2636.
- M. Z. Tuo et al., “Beam Dynamics Design of a Synchrotron Injector with Laser-Accelerated Ions”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3085-3088.
- M. Tobiyama, T. Kasuga, T. Katsura, T. Obina, and T. Takeo, “Measurement of Bunch Time-Structure in KEK PF”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1338-1341.
- D. Wang, J. Liu, and X. L. Wang, “Research on Fault Diagnosis of Power Supply Control System on BEPCII”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 361-364.
- C. Bruno, N. Camarcat, J. Cortella, C. Patou, and B. Tournier, “Pulsed Neutron Source from the Intense Particle Beam Generator THALIE”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3139-3142.
- G. Wang et al., “Path to high current 500 mA at NSLS-II”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG13, unpublished.
- B. Spaniol and W. C. Heraeus GmbH, “quot;Oligo-crystalinquot; Niobium / Large Grain Niobium Discs, Directly Cut from Ingot”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH163, pp. 0-3645.
- S. Fukuda et al., “Development of a High-Power VHF Klystron for JHF”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D015, pp. 112-114.
- V. Kushin et al., “Details of the Initial Part of the Tungsten Ion Linac for Particle Track Membranes Production”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAC05, pp. 140-142.
- A. X. Wang et al., “The Deformation-Stress Simulation and Measurement of Titanium Foil Strip for Hadron Monitor”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4187-4189.
- L. Kang et al., “Introduction About Key Techniques of Critical Equipment in CSNS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4548-4550.
- M. Zhong, C.-X. Tang, and S. X. Zheng, “The Primary Experiment of Multipactor Electron Gun Based Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP091, pp. 4990-4992.
- G. X. Xia, M. Ivanyan, K. Manukyan, K. A. Sargsyan, and R. Wanzenberg, “Ion Effect Issues in PETRA III”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP073, pp. 3371-3373.
- N. Simos, N. Catalan-Lasheras, S. Crivello, and H. Ludewig, “Double-Wall Collimator Design of the SNS Project”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH084, pp. 1405-1407.
- J. Tang, J. F. Chen, and Y. Zou, “Momentum Collimation in a High-intensity Compact Rapid Cycling Proton Synchrotron”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD66, pp. 254-258.
- L. M. Sevryukova, A. I. Ageev, V. V. Alimov, and O. A. Voinalovich, “Development of Production Technology for Weldless Copper Shells of SC Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I27, pp. XX-XX.
- L. Wu, S. Y. Chen, C. H. Li, H. Qu, H. J. Wang, and X. L. Wang, “Research Development of High Precision Installation and Alignment System for HEPS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2924-2926.
- A. Valentinov et al., “FIRST RESULTS OF SIBERIA-2 STORAGE RING OPERATION WITH 7.5 T SUPERCONDUCTING WIGGLER”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDAU02, pp. XX-XX.
Back to search