Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Piselli et al., “CERN-SPS Wire Scanner Impedence and Wire Heating Studies”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF16, pp. 88-92.
[n] T. Momose et al., “Radiation Dose Measurements and a Study of Damage to Accelerator Components in the TRISTAN ee- Collider at 27.5 GeV”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1284-1287.
[n] R. Spesyvtsev, J. W. Baehr, S. Khodyachykh, and L. Staykov, “Screen studies at PITZ”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC05, pp. 153-155.
[n] R. L. Madrak et al., “Progress on the Design of a Perpendicularly Biased 2nd Harmonic Cavity for the Fermilab Booster”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 130-133. doi:10.18429/JACoW-NAPAC2016-MOPOB28
[n] D. Fernandez, M. Ounsy, and C. Scafuri, “The Tango collaboration Status and some of the latest developments”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_006.
[n] R. Ursic and R. De Monte, “Digital Receivers Offer New Solutions for Beam Instrumentation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA172, pp. 2253-2255.
[n] M. Krasilnikov et al., “PITZ Experience on the Experimental Optimization of the RF Photo Injector for the European XFEL”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUOANO04, pp. 160-168.
[n] T. Higo et al., “Various Observables of TW Accelerator Structures Operating 100MV/m or Higher at X-band Facility, Nextef of KEK”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA012, pp. 3699-3701.
[n] N. A. Galyaev, Y. A. Chesnokov, V. I. Kotov, S. V. Tsarik, and V. N. Zapol, “Bent Single Crystals to Form High Energy Particle Beams”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 192-195.
[n] L. Froehlich, G. Cautero, D. Di Giovenale, D. Giuressi, and R. H. Menk, “The Machine Protection System for FERMI@Elettra”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPC10, pp. 667-670.
[n] T. B. Hadavizadeh et al., “Transverse Emittance Measurements Using LHCb's Beam-Gas Interactions”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 441-444. doi:10.18429/JACoW-IPAC2017-MOPAB131
[n] M. Marongiu et al., “Optical Issues for the Diagnostic Stations for the ELI-NP Compton Gamma Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 238-241. doi:10.18429/JACoW-IPAC2017-MOPAB058
[n] S. Casalbuoni et al., “Field Quality of 1.5 m Long Conduction Cooled Superconducting Undulator Coils with 20 mm Period Length”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1395-1398. doi:10.18429/JACoW-IPAC2017-TUPAB035
[n] Y. Mizumachi and K. Muto, “RF Phase Shake and Counterphasing at Phase Transition”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2563-2566.
[n] S. W. Jang et al., “The Development of Button Type BPM Electronics for RAON”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 362-364. doi:10.18429/JACoW-IPAC2017-MOPAB100
[n] T. Russo, S. Bellavia, D. M. Gassner, P. Thieberger, D. Trbojevic, and T. Tsang, “RHIC Hydrogen Jet Luminesence Monitor”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THYC01, pp. 2648-2652.
[n] H. Hotchi et al., “The Path to 1 MW: Beam Loss Control in the J-PARC 3-GeV RCS”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 480-485. doi:10.18429/JACoW-HB2016-THAM6X01
[n] S. Marks et al., “Magnetic Performance of the Advanced Light Source EPU5.0 Elliptically Polarizing Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUAR4, pp. 162-164.
[n] B. Schofield, E. Blanco Vinuela, W. Booth, and M. O. Peljo, “Waste Heat Recovery for the LHC Coooling Towers: Control System Validation Using Digital Twins”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 521. doi:10.18429/JACoW-ICALEPCS2019-MOPHA131
[n] K. Zhu et al., “Monoenergetic Beam Generated by Laser Accelerator at Peking University”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4702-4704. doi:10.18429/JACoW-IPAC2018-THPML024
[n] F. Sannibale et al., “Compensation of Insertion Device Induced Emittance Variations in Ultralow Emittance Storage Rings”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1751-1754. doi:10.18429/JACoW-IPAC2018-WEXGBE2
[n] K. Takayama et al., “Ion Source and Low Energy Beam Transport for the KEK Digital Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC053, pp. 579-581.
[n] H. Suk et al., “Overview of The Laser Wakefield Acceleration Research at KERI”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH204, pp. 591-595.
[n] X. W. Wu et al., “High-Gradient Breakdown Studies of X-Band Choke-Mode Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1322-1325. doi:10.18429/JACoW-IPAC2017-TUPAB010
[n] M. Kuchnir, J. D. McCarthy, and R. J. Pasquinelli, “Superconducting Delay Line for Stochastic Cooling Filters”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3360-3363.
[n] D. J. Liska, L. B. Dauelsberg, and G. Spalek, “Precision Alignment of Permanent Magnet Drift Tubes”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-5, pp. 48-49.
[n] K. R. Eppley, W. B. Herrmannsfeldt, and T. G. Lee, “Improving the Efficiency of Microwave Devices with a Double Output Cavity”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-29, pp. 109-111.
[n] M. LABAT, M.-E. Couprie, M. Hosaka, M. Katoh, A. Mochihashi, and Y. Takashima, “Detuning Curve Analysis on the UVSOR2 Free-Electron Laser”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP002, pp. XX-XX.
[n] Y. X. Luo, I. S. Ko, W. Namkung, and C. Ryu, “Beam Emittance Measurement Technique for PLS-IM-T Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1195-1198.
[n] W. Chupp, D. Clark, R. Richter, J. Staples, and E. Zajec, “Operation of a High-Current Xenon Source”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3036-3039.
[n] P. Muggli et al., “Electron and Positron Bunch Self-modulation Experiments at SLAC-FACET”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC02, pp. 84-86.
[n] R. Grewe et al., “Superconducting RF Cavity Materials Research at the S-DALINAC”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 74-76. doi:10.18429/JACoW-SRF2019-MOP022
[n] E. Al-Dmour, “Vacuum Performances in the Most Recent Third Generation Synchrotron Light Sources”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOZBG01, pp. 31-35.
[n] B. S. C. Oswald, P. Leidenberger, and S. Tsujino, “Modeling Nanometer Structured Laser Induced Field Emission”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC054, pp. 1844-1846.
[n] Y.-N. Rao, R. A. Baartman, and T. Planche, “Improved Simulation for Centre Region of TRIUMF 500 MeV Cyclotron with Space Charge”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3489-3491. doi:10.18429/JACoW-IPAC2018-THPAK109
[n] S. Barbanotti, M. Bonezzi, C. Engling, K. Jensch, R. Mattusch, and M. Todero, “Production and Qualification of Low Thermal Conduction Suspension Supports for the Cold Mass of Long Superconducting Acceleration Modules”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP115, pp. 829-831.
[n] M. White, “The Spallation Neutron Source (SNS)”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO101, pp. 1-5.
[n] P. Emma et al., “First Results of the LCLS Laser-Heater System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP041, pp. 2358-2360.
[n] S. Fu, H. C. Liu, H. F. Ouyang, S. Wang, J. Li, and J. Peng, “CSNS Front End and Linac Commissioning”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. XX-XX. doi:10.18429/JACoW-LINAC2018-MO1A01
[n] G. Segura, A. Ledeul, A. Savulescu, B. Styczen, and D. Vazquez Rivera, “Innovative Graphical User Interfaces Development: Give the Power Back to Users”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 44-46. doi:10.18429/JACoW-PCaPAC2018-WEP07
[n] V. E. Scarpine et al., “The Fermilab HINS Test Facility and Beam Measurements of the Ion Source and 325 MHz RFQ”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUOA03, pp. 283-285.
[n] A. Khaleghi, K. Mahmoudi, M. Oghbaie, M. Akbari, and J. Rahighi, “Conceptual Design of Developing a Mobile App for Distributed Information Services for Control Systems (DISCS)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 315-317. doi:10.18429/JACoW-ICALEPCS2017-TUMPL06
[n] P. J. Phillips et al., “Single-shot Longitudinal Bunch Profile Measurements at FLASH Using Electro-optic Detection Techniques”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC081, pp. 1242-1244.
[n] I. Krouptchenkov, A. Brenger, G. Kube, F. Schmidt-F?Âhre, and K. Wittenburg, “Experience with the Commissioning of the Libera Brilliance BPM Electronics at PETRA III”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD03, pp. 291-293.
[n] S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583.
[n] D. V. Neuffer et al., “Muon Sources for Particle Physics - Accomplishments of MAP”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1766-1769. doi:10.18429/JACoW-IPAC2017-TUPIK038
[n] D. Anicic, “Quest for the New Standard PSI IOC Platform”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 119-123. doi:10.18429/JACoW-PCaPAC2018-THCA1
[n] R. Ferdinad et al., “Low Energy Part of the CONCERT High-Power Proton Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH022, pp. 3272-3274.
[n] K. S. White, S. M. Hartman, K.-U. Kasemir, and I. Verstovsek, “Controls Request Tracker”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOC004, pp. XX-XX.
[n] T. Straumann, “Open Source Real-Time Operating Systems Overview”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEBI001, pp. XX-XX.
[n] M. T. F. Pivi et al., “Recommendation for the Feasibility of More Compact LC Damping Rings”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE097, pp. 3578-3580.
[n] A. Garcia Mu??oz and S. Gabourin, “Testing Digital Electronic Protection Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU002, pp. 1047-1050.
[n] C. Steier et al., “Orbit Feedback Development at the ALS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI029, pp. 2103-2105.
[n] D. Trbojevic et al., “Improvements of the RHIC Ramp Efficiency”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE061, pp. 383-385.
[n] J. R. Piton, M. P. Donadio, D. Omitto, M. A. Raulik, H. Westfahl Jr, and B. C. Yenikomochian, “Hyppie: A Hypervisored PXI for Physics Instrumentation under EPICS”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG031, pp. 95-97.
[n] Y. S. Cho et al., “A 350 MHz CW RFQ Linac for the KOMAC/KTF”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A16, pp. 812-814.
[n] W. M. Fawley, G. J. Caporaso, M. R. Teague, S. S. Yu, and A. M. Sessler, “Novel Accelerators Employing High-Current Electron Beams: Numerical Simulations”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-30, pp. 112-115.
[n] G. R. White et al., “The EPICS Software Framework Moves from Controls to Physics”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1216-1218. doi:10.18429/JACoW-IPAC2019-TUZZPLM3
[n] F. Gerardin et al., “Space Charge Compensation in Low Energy Beam Lines”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3055-3057. doi:10.18429/JACoW-IPAC2016-WEPOY033
[n] H. Okuno et al., “Operational Experience and Upgrade Plans of the RIBF Accelerator Complex”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-Cyclotrons2016-MOA01
[n] C. Deibele et al., “Experimental Tests of a Prototype System for Active Damping of the E-P Instability at the LANL PSR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXC01, pp. 1991-1995.
[n] E. Gjonaj et al., “Large Scale Parallel Wake Field Computations for 3D-Accelerator Structures with the PBCI Code”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOM2IS02, pp. 29-34.
[n] M. Stettler et al., “A Distributed Timing System for Synchronizing Control and Data Correlation”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-74, pp. 820-822.
[n] J. R. Leibfritz et al., “Status and Plans for a SRF Accelerator Test Facility at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP009, pp. 118-120.
[n] A. Lumpkin et al., “Overall Design Concepts for the APS Storage Ring Machine Protection System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ08, pp. 2467-2469.
[n] K. L. F. Bane, R. Gluckstern, and N. Holtkamp, “The Coupled Dipole Modes of the NLC Accelerator Structure”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 904-907.
[n] A. Lasheen et al., “Synchrotron Frequency Shift as a Probe of the CERN SPS Reactive Impedance”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO4LR02, pp. 409-413.
[n] D. P. Grote, A. Friedman, and I. Haber, “Three Dimensional Simulations of a Small Induction Recirculator Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR15, pp. 831-833.
[n] A. Massarotti, G. D'Auria, A. Fabris, C. Pasotti, C. Rossi, and M. Svandrlik, “Status Report on the ELETTRA R.F. System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 710-713.
[n] Y. Sato et al., “Design of the Low Energy Beam Transport in RIKEN New Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB023, pp. 3936-3938.
[n] T. Tanikawa et al., “A Superradiant THz Undulator Source for XFELs”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 48-51. doi:10.18429/JACoW-FEL2019-TUP004
[n] P. N. Ostroumov, Z. A. Conway, B. Mustapha, and A. S. Plastun, “Design and Beam Dynamics Studies of a Multi-Ion Linac Injector for the JLEIC Ion Complex”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 559-561. doi:10.18429/JACoW-HB2016-THPM5Y01
[n] S. Shibata, Z. Igarashi, H. Ishii, and K. Muto, “KEK Beam Position Monitor System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1736-1739.
[n] N. Kuklev, Y. K. Kim, and A. L. Romanov, “Synchrotron Radiation Beam Diagnostics for the Integrable Optics Test Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2073-2076. doi:10.18429/JACoW-IPAC2018-WEPAG005
[n] A. D. Wu et al., “Vertical Test Results of Plasma In-situ Cleaning on Low Beta HWR Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 408-411. doi:10.18429/JACoW-LINAC2018-TUPO036
[n] H. Ishizuka, A. Fisher, K. Kamada, R. Prohaska, and N. Rostoker, “Preliminary Experiment on the Electron Beam Extraction from a Stellatron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 136-139.
[n] I. Krouptchenkov and K. Wittenburg, “FPGA based Frame Grabber for Video Beam Diagnostics”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC12, pp. 174-176.
[n] R. Moser et al., “ProShell ÔÇô The MedAustron Accelerator Control Procedure Framework”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN005, pp. 246-249.
[n] H. Ao et al., “Fabrication of Disk-and-Washer Cavity”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D042, pp. 187-189.
[n] M. Dehn, H. Euteneuer, and A. Jankowiak, “Longitudinal Beam Dynamics in the HDSM at MAMI”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP063, pp. 3594-3596.
[n] N. I. Zaitsev et al., “500 keV, 200 A MICROSECOND ELECTRON ACCELERATOR WITH A REPETITION RATE OF 10 Hz”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THBPH09, pp. XX-XX.
[n] D. A. Liakin, S. V. Barabin, T. Kulevoy, A. Y. Orlov, and M. S. Saratovskikh, “Some Development Aspects of Control and Diagnostic Systems for Fourth-Generation Russian Synchrotron Radiation Source”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 450-452. doi:10.18429/JACoW-RUPAC2018-THPSC20
[n] V. L. Auslender et al., “ELECTRON ACCELERATOR FOR ENERGY UP TO 5.0 MEV AND BEAM POWER UP TO 50 KW”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THJI03, pp. XX-XX.
[n] J. F. Chen et al., “Multipacting Study in INFN-LASA ESS Medium-Beta Cavity”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1019-1022. doi:10.18429/JACoW-IPAC2017-MOPVA064
[n] F. J. Bermejo, I. Bustinduy, and J. Lucas, “Baseline Design for the ESS-Bilbao Superconducting Proton Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP082, pp. 1482-1484.
[n] L. M. Bobb, A. F. D. Morgan, and G. Rehm, “Streak Camera PSF Optimisation and Dual Sweep Calibration for Sub-ps Bunch Length Measurement”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 206-210. doi:10.18429/JACoW-IBIC2015-MOPB066
[n] H. Baba et al., “DC Power Supplies for 1MW Klystron in the TRISTAN Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1523-1526.
[n] T. Higo et al., “Fabrication of a Quadrant-type Accelerator Structure for CLIC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP084, pp. 2716-2718.
[n] S. Blanchard et al., “The Linac4 Vacuum Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1494-1497. doi:10.18429/JACoW-ICALEPCS2017-THPHA056
[n] O. Napoly et al., “Technical Challenges for Head-On Collisions and Extraction at the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN005, pp. 2716-2718.
[n] L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 105-107. doi:10.18429/JACoW-MEDSI2016-MOPE43
[n] T. Pettersson et al., “The CERN EDMS : An Engineering and Equipment Data Management System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO027, pp. 2697-2699.
[n] R. Akre et al., “LCLS Beam-Position Monitor Data Acquisition System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB40, pp. 478-480.
[n] W. Chou, “Overview of proton driver studies for neutrino and muon factories”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAY01, pp. 64-68.
[n] C. Benabderrahmane et al., “Development of Pr2Fe14B Cryogenic Undulator CPMU at SOLEIL”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA24, pp. 523-526.
[n] J. Repond, H. Damerau, A. Lasheen, and E. N. Shaposhnikova, “Lower-Harmonic RF System in the CERN SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3087-3090. doi:10.18429/JACoW-IPAC2018-THPAF053
[n] D. J. Dunning et al., “Start-to-End Simulations of the CLARA FEL Test Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4430-4433. doi:10.18429/JACoW-IPAC2018-THPMK060
[n] K. Shafak et al., “Synchronous Laser-Microwave Network for Attosecond-Resolution Photon Science”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 286-289. doi:10.18429/JACoW-IBIC2016-TUBL03
[n] S. Blanchard, R. Ferreira, P. Gomes, G. Pigny, and A. P. Rocha, “Integration of Wireless Mobile Equipment in Supervisory Application”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1103. doi:10.18429/JACoW-ICALEPCS2019-WEPHA017
[n] I. Dolenc Kittelmann et al., “Ionisation Chamber Based Beam Loss Monitoring System for the ESS Linac”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 136-140. doi:10.18429/JACoW-IBIC2019-MOPP023
[n] Y. J. Pei et al., “Commissioning of the Compact 14MeV LINAC for an FEL-Based THz Source”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 509-511. doi:10.18429/JACoW-LINAC2016-TUPLR020
[n] X. Singer, A. Ermakov, A. Matheisen, A. Schmidt, and W. Singer, “Structure of the Electron Beam Welding Connections”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO074, pp. 412-412.
[n] S. Schnepp, E. Gjonaj, and T. Weiland, “A Time-Adaptive Mesh Approach for the Self-Consistent Simulation of Particle Beams”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUPPP26, pp. 132-135.
[n] N. Tsoupas et al., “Design of Beam Transfer Lines for the NSLS II”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS102, pp. 664-666.
[n] P. H??lsmann et al., “Development of a new Broadband Accelerating System for the SIS18 Upgrade at GSI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD029, pp. 744-746.
[n] T. L. Houck and G. A. Westenskow, “Status of the Choppertron Experiments”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-65, pp. 498-500.
[n] C. Piel, “Highly Customized Industrialized Linacs for Applications in Scientific Research”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM04, pp. 1967-1971.
[n] M. Krasilnikov, J. W. Baehr, M. H?ñnel, F. Stephan, and I. Will, “Experimental Optimization of the Cathode Laser Temporal Profile”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB29, pp. 135-137.
[n] K. M. Thompson, S. Kim, R. Lari, and L. R. Turner, “Quadrupole Magnet for the APS Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 396-399.
[n] D. Dohan et al., “Requirements for a New Resonator Structure at TRIUMF”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J06, pp. 357-359.
[n] R. Merl and T. Spickermann, “Use of a Reconfigurable VME Module To Measure Beam Energy at the Los Alamos Proton Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT019, pp. 1658-1660.
[n] A. K. Ciftci, S. Sultansoy, and O. Yavas, “Linac*LHC based ep, gamma-p, eA, gamma-A and FEL gamma-A Colliders”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP2A18, pp. 391-396.
[n] A. M. Tremaine et al., “Inverse Free Electron Laser Accelerators for Driving Compact Light Sources and Detection Applications”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOBN2, pp. 1-3.
[n] G. Bisoffi et al., “Hardware Commissioning of the Renovated PIAVE Injector at INFN-LNL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 949-952. doi:10.18429/JACoW-IPAC2019-MOPTS042
[n] T. Watanabe et al., “Calibration for Beam Energy Position Monitor System for Riken Superconducting Acceleration Cavity”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 526-529. doi:10.18429/JACoW-IBIC2019-WEPP007
[n] J. Fitzek, H. C. Hüther, R. Mueller, and A. Schaller, “First Production Use of the New Settings Management System for FAIR”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1512-1516. doi:10.18429/JACoW-ICALEPCS2017-THPHA062
[n] B. Walasek-Hoehne et al., “Optical Transition Radiation for Non-relativistic Ion Beams”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3C01, pp. 580-582.
[n] Y. E. Tan, D. R. T. Appadoo, M. J. Boland, and R. T. Dowd, “Low Alpha Configuration for Generating Short Bunches”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP009, pp. 3711-3713.
[n] R. Fliller III et al., “New Results from Crystal Collimation at RHIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB034, pp. 1691-1693.
[n] T. Mitsumoto et al., “Design Study of Sector Magnets of Superconducting Ring Cyclotron for the RIKEN RI Beam Factory”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-18, pp. 237-240.
[n] M. M. El-Ashmawy, G. D'Auria, M. M. Dehler, J.-Y. Raguin, G. Riddone, and R. Zennaro, “Single Bunch Wakefields in the CERN-PSI-ELETTRA X-band Linear Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD032, pp. 1997-1999.
[n] S. L. Kramer, R. Biscardi, and G. Ramirez, “Bunch Length Control in the VUV Light Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1874-1877.
[n] R. J. Reid, “Vacuuum System Design and Performance for the Daresbury HBL”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1337-1340.
[n] N. Schwarz, F. De Carlo, A. Glowacki, J. P. Hammonds, F. Khan, and K. Yue, “Experiment Control and Analysis for High-Resolution Tomography”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB03, pp. 1469-1472.
[n] Yu. M. Ado et al., “Peculiarities of the IHEP Accelerator Complex Operation with the Fast-Cycling Booster”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 303-305.
[n] G. Cox et al., “Status of the ERLP Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB38, pp. 244-246.
[n] S. A. Cherenshchykov, “Cold-Cathode Kiloampere Electron Gun with Secondary Emission at Relativistic Voltage”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP096, pp. 1522-1524.
[n] F. Touze and G. Le Meur, “A Non Conforming Finite Element Method for Computing Eigenmodes of Resonant Cavities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1696-1699.
[n] F. Blas et al., “Conversion of the PS Complex as LHC Proton Pre-Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W011, pp. 973-975.
[n] G. A. Decker and O. V. Singh, “Orbit Feedback Using X-ray Beam Position Monitoring at the Advanced Photon Source”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WECI001, pp. XX-XX.
[n] B. Wiik, “The Status of HERA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 351-356.
[n] K. Cerff, W. Mexner, and T. Spangenberg, “The ANKA B-Field Test Facility Control System, based on a SPEC Macro Package Enhanced Setup”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL014, pp. 156-158.
[n] B. Franksen, B. Kuner, and T. Birke, “Experiences: Configuration Management with a Generic RDB Data-Model”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA37, pp. 594-596.
[n] S. V. Kuzikov, S. P. Antipov, P. V. Avrakhov, E. W. Knight, J. G. Power, and Y. Zhao, “Diamond Beam Halo Monitor”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 197-201. doi:10.18429/JACoW-IBIC2020-WEPP38
[n] D. Prasuhn et al., “Status of the Cooler Synchrotron COSY Juelich”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH054, pp. 3350-3352.
[n] M. Seebach, M. Werner Deutsches Elektronen-Synchrotron, H. Franz, and A. Ehnes Deutsches Elektronen-Synchrotron, “Parasitic Bunch Measurement in e+/e- Storage Rings”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM24, pp. XX-XX.
[n] M. Pezzetti, C. F. Fluder, and R. Orlandi, “CERN Neutrino Cryogenic Control System Technology: From the WA105 Test Facility to the NP04 and NP02 Platforms”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1210. doi:10.18429/JACoW-ICALEPCS2019-WEPHA049
[n] O. Gutzwiller et al., “Status of the ATLAS Detector Control System and Common Infrastructure Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP103, pp. 316-318.
[n] R. K. Agrawal et al., “Synchronous Ramping Scheme for SRS INDUS-2”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_017.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Piselli et al., “CERN-SPS Wire Scanner Impedence and Wire Heating Studies”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF16, pp. 88-92.
- T. Momose et al., “Radiation Dose Measurements and a Study of Damage to Accelerator Components in the TRISTAN ee- Collider at 27.5 GeV”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1284-1287.
- R. Spesyvtsev, J. W. Baehr, S. Khodyachykh, and L. Staykov, “Screen studies at PITZ”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC05, pp. 153-155.
- R. L. Madrak et al., “Progress on the Design of a Perpendicularly Biased 2nd Harmonic Cavity for the Fermilab Booster”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 130-133.
- D. Fernandez, M. Ounsy, and C. Scafuri, “The Tango collaboration Status and some of the latest developments”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O3_006.
- R. Ursic and R. De Monte, “Digital Receivers Offer New Solutions for Beam Instrumentation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA172, pp. 2253-2255.
- M. Krasilnikov et al., “PITZ Experience on the Experimental Optimization of the RF Photo Injector for the European XFEL”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUOANO04, pp. 160-168.
- T. Higo et al., “Various Observables of TW Accelerator Structures Operating 100MV/m or Higher at X-band Facility, Nextef of KEK”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA012, pp. 3699-3701.
- N. A. Galyaev, Y. A. Chesnokov, V. I. Kotov, S. V. Tsarik, and V. N. Zapol, “Bent Single Crystals to Form High Energy Particle Beams”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 192-195.
- L. Froehlich, G. Cautero, D. Di Giovenale, D. Giuressi, and R. H. Menk, “The Machine Protection System for FERMI@Elettra”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPC10, pp. 667-670.
- T. B. Hadavizadeh et al., “Transverse Emittance Measurements Using LHCb's Beam-Gas Interactions”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 441-444.
- M. Marongiu et al., “Optical Issues for the Diagnostic Stations for the ELI-NP Compton Gamma Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 238-241.
- S. Casalbuoni et al., “Field Quality of 1.5 m Long Conduction Cooled Superconducting Undulator Coils with 20 mm Period Length”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1395-1398.
- Y. Mizumachi and K. Muto, “RF Phase Shake and Counterphasing at Phase Transition”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2563-2566.
- S. W. Jang et al., “The Development of Button Type BPM Electronics for RAON”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 362-364.
- T. Russo, S. Bellavia, D. M. Gassner, P. Thieberger, D. Trbojevic, and T. Tsang, “RHIC Hydrogen Jet Luminesence Monitor”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THYC01, pp. 2648-2652.
- H. Hotchi et al., “The Path to 1 MW: Beam Loss Control in the J-PARC 3-GeV RCS”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 480-485.
- S. Marks et al., “Magnetic Performance of the Advanced Light Source EPU5.0 Elliptically Polarizing Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUAR4, pp. 162-164.
- B. Schofield, E. Blanco Vinuela, W. Booth, and M. O. Peljo, “Waste Heat Recovery for the LHC Coooling Towers: Control System Validation Using Digital Twins”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 521.
- K. Zhu et al., “Monoenergetic Beam Generated by Laser Accelerator at Peking University”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4702-4704.
- F. Sannibale et al., “Compensation of Insertion Device Induced Emittance Variations in Ultralow Emittance Storage Rings”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1751-1754.
- K. Takayama et al., “Ion Source and Low Energy Beam Transport for the KEK Digital Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC053, pp. 579-581.
- H. Suk et al., “Overview of The Laser Wakefield Acceleration Research at KERI”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH204, pp. 591-595.
- X. W. Wu et al., “High-Gradient Breakdown Studies of X-Band Choke-Mode Structures”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1322-1325.
- M. Kuchnir, J. D. McCarthy, and R. J. Pasquinelli, “Superconducting Delay Line for Stochastic Cooling Filters”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3360-3363.
- D. J. Liska, L. B. Dauelsberg, and G. Spalek, “Precision Alignment of Permanent Magnet Drift Tubes”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-5, pp. 48-49.
- K. R. Eppley, W. B. Herrmannsfeldt, and T. G. Lee, “Improving the Efficiency of Microwave Devices with a Double Output Cavity”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-29, pp. 109-111.
- M. LABAT, M.-E. Couprie, M. Hosaka, M. Katoh, A. Mochihashi, and Y. Takashima, “Detuning Curve Analysis on the UVSOR2 Free-Electron Laser”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP002, pp. XX-XX.
- Y. X. Luo, I. S. Ko, W. Namkung, and C. Ryu, “Beam Emittance Measurement Technique for PLS-IM-T Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1195-1198.
- W. Chupp, D. Clark, R. Richter, J. Staples, and E. Zajec, “Operation of a High-Current Xenon Source”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3036-3039.
- P. Muggli et al., “Electron and Positron Bunch Self-modulation Experiments at SLAC-FACET”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC02, pp. 84-86.
- R. Grewe et al., “Superconducting RF Cavity Materials Research at the S-DALINAC”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 74-76.
- E. Al-Dmour, “Vacuum Performances in the Most Recent Third Generation Synchrotron Light Sources”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOZBG01, pp. 31-35.
- B. S. C. Oswald, P. Leidenberger, and S. Tsujino, “Modeling Nanometer Structured Laser Induced Field Emission”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC054, pp. 1844-1846.
- Y.-N. Rao, R. A. Baartman, and T. Planche, “Improved Simulation for Centre Region of TRIUMF 500 MeV Cyclotron with Space Charge”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3489-3491.
- S. Barbanotti, M. Bonezzi, C. Engling, K. Jensch, R. Mattusch, and M. Todero, “Production and Qualification of Low Thermal Conduction Suspension Supports for the Cold Mass of Long Superconducting Acceleration Modules”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP115, pp. 829-831.
- M. White, “The Spallation Neutron Source (SNS)”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO101, pp. 1-5.
- P. Emma et al., “First Results of the LCLS Laser-Heater System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP041, pp. 2358-2360.
- S. Fu, H. C. Liu, H. F. Ouyang, S. Wang, J. Li, and J. Peng, “CSNS Front End and Linac Commissioning”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. XX-XX.
- G. Segura, A. Ledeul, A. Savulescu, B. Styczen, and D. Vazquez Rivera, “Innovative Graphical User Interfaces Development: Give the Power Back to Users”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 44-46.
- V. E. Scarpine et al., “The Fermilab HINS Test Facility and Beam Measurements of the Ion Source and 325 MHz RFQ”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUOA03, pp. 283-285.
- A. Khaleghi, K. Mahmoudi, M. Oghbaie, M. Akbari, and J. Rahighi, “Conceptual Design of Developing a Mobile App for Distributed Information Services for Control Systems (DISCS)”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 315-317.
- P. J. Phillips et al., “Single-shot Longitudinal Bunch Profile Measurements at FLASH Using Electro-optic Detection Techniques”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC081, pp. 1242-1244.
- I. Krouptchenkov, A. Brenger, G. Kube, F. Schmidt-F?Âhre, and K. Wittenburg, “Experience with the Commissioning of the Libera Brilliance BPM Electronics at PETRA III”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD03, pp. 291-293.
- S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583.
- D. V. Neuffer et al., “Muon Sources for Particle Physics - Accomplishments of MAP”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1766-1769.
- D. Anicic, “Quest for the New Standard PSI IOC Platform”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 119-123.
- R. Ferdinad et al., “Low Energy Part of the CONCERT High-Power Proton Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH022, pp. 3272-3274.
- K. S. White, S. M. Hartman, K.-U. Kasemir, and I. Verstovsek, “Controls Request Tracker”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOC004, pp. XX-XX.
- T. Straumann, “Open Source Real-Time Operating Systems Overview”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEBI001, pp. XX-XX.
- M. T. F. Pivi et al., “Recommendation for the Feasibility of More Compact LC Damping Rings”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE097, pp. 3578-3580.
- A. Garcia Mu??oz and S. Gabourin, “Testing Digital Electronic Protection Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU002, pp. 1047-1050.
- C. Steier et al., “Orbit Feedback Development at the ALS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI029, pp. 2103-2105.
- D. Trbojevic et al., “Improvements of the RHIC Ramp Efficiency”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE061, pp. 383-385.
- J. R. Piton, M. P. Donadio, D. Omitto, M. A. Raulik, H. Westfahl Jr, and B. C. Yenikomochian, “Hyppie: A Hypervisored PXI for Physics Instrumentation under EPICS”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG031, pp. 95-97.
- Y. S. Cho et al., “A 350 MHz CW RFQ Linac for the KOMAC/KTF”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4A16, pp. 812-814.
- W. M. Fawley, G. J. Caporaso, M. R. Teague, S. S. Yu, and A. M. Sessler, “Novel Accelerators Employing High-Current Electron Beams: Numerical Simulations”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-30, pp. 112-115.
- G. R. White et al., “The EPICS Software Framework Moves from Controls to Physics”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1216-1218.
- F. Gerardin et al., “Space Charge Compensation in Low Energy Beam Lines”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3055-3057.
- H. Okuno et al., “Operational Experience and Upgrade Plans of the RIBF Accelerator Complex”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. XX-XX.
- C. Deibele et al., “Experimental Tests of a Prototype System for Active Damping of the E-P Instability at the LANL PSR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEXC01, pp. 1991-1995.
- E. Gjonaj et al., “Large Scale Parallel Wake Field Computations for 3D-Accelerator Structures with the PBCI Code”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper MOM2IS02, pp. 29-34.
- M. Stettler et al., “A Distributed Timing System for Synchronizing Control and Data Correlation”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-74, pp. 820-822.
- J. R. Leibfritz et al., “Status and Plans for a SRF Accelerator Test Facility at Fermilab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP009, pp. 118-120.
- A. Lumpkin et al., “Overall Design Concepts for the APS Storage Ring Machine Protection System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ08, pp. 2467-2469.
- K. L. F. Bane, R. Gluckstern, and N. Holtkamp, “The Coupled Dipole Modes of the NLC Accelerator Structure”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 904-907.
- A. Lasheen et al., “Synchrotron Frequency Shift as a Probe of the CERN SPS Reactive Impedance”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO4LR02, pp. 409-413.
- D. P. Grote, A. Friedman, and I. Haber, “Three Dimensional Simulations of a Small Induction Recirculator Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR15, pp. 831-833.
- A. Massarotti, G. D'Auria, A. Fabris, C. Pasotti, C. Rossi, and M. Svandrlik, “Status Report on the ELETTRA R.F. System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 710-713.
- Y. Sato et al., “Design of the Low Energy Beam Transport in RIKEN New Injector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB023, pp. 3936-3938.
- T. Tanikawa et al., “A Superradiant THz Undulator Source for XFELs”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 48-51.
- P. N. Ostroumov, Z. A. Conway, B. Mustapha, and A. S. Plastun, “Design and Beam Dynamics Studies of a Multi-Ion Linac Injector for the JLEIC Ion Complex”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 559-561.
- S. Shibata, Z. Igarashi, H. Ishii, and K. Muto, “KEK Beam Position Monitor System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1736-1739.
- N. Kuklev, Y. K. Kim, and A. L. Romanov, “Synchrotron Radiation Beam Diagnostics for the Integrable Optics Test Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2073-2076.
- A. D. Wu et al., “Vertical Test Results of Plasma In-situ Cleaning on Low Beta HWR Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 408-411.
- H. Ishizuka, A. Fisher, K. Kamada, R. Prohaska, and N. Rostoker, “Preliminary Experiment on the Electron Beam Extraction from a Stellatron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 136-139.
- I. Krouptchenkov and K. Wittenburg, “FPGA based Frame Grabber for Video Beam Diagnostics”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC12, pp. 174-176.
- R. Moser et al., “ProShell ÔÇô The MedAustron Accelerator Control Procedure Framework”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN005, pp. 246-249.
- H. Ao et al., “Fabrication of Disk-and-Washer Cavity”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D042, pp. 187-189.
- M. Dehn, H. Euteneuer, and A. Jankowiak, “Longitudinal Beam Dynamics in the HDSM at MAMI”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP063, pp. 3594-3596.
- N. I. Zaitsev et al., “500 keV, 200 A MICROSECOND ELECTRON ACCELERATOR WITH A REPETITION RATE OF 10 Hz”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THBPH09, pp. XX-XX.
- D. A. Liakin, S. V. Barabin, T. Kulevoy, A. Y. Orlov, and M. S. Saratovskikh, “Some Development Aspects of Control and Diagnostic Systems for Fourth-Generation Russian Synchrotron Radiation Source”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 450-452.
- V. L. Auslender et al., “ELECTRON ACCELERATOR FOR ENERGY UP TO 5.0 MEV AND BEAM POWER UP TO 50 KW”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THJI03, pp. XX-XX.
- J. F. Chen et al., “Multipacting Study in INFN-LASA ESS Medium-Beta Cavity”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1019-1022.
- F. J. Bermejo, I. Bustinduy, and J. Lucas, “Baseline Design for the ESS-Bilbao Superconducting Proton Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP082, pp. 1482-1484.
- L. M. Bobb, A. F. D. Morgan, and G. Rehm, “Streak Camera PSF Optimisation and Dual Sweep Calibration for Sub-ps Bunch Length Measurement”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 206-210.
- H. Baba et al., “DC Power Supplies for 1MW Klystron in the TRISTAN Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1523-1526.
- T. Higo et al., “Fabrication of a Quadrant-type Accelerator Structure for CLIC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP084, pp. 2716-2718.
- S. Blanchard et al., “The Linac4 Vacuum Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1494-1497.
- O. Napoly et al., “Technical Challenges for Head-On Collisions and Extraction at the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN005, pp. 2716-2718.
- L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 105-107.
- T. Pettersson et al., “The CERN EDMS : An Engineering and Equipment Data Management System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO027, pp. 2697-2699.
- R. Akre et al., “LCLS Beam-Position Monitor Data Acquisition System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB40, pp. 478-480.
- W. Chou, “Overview of proton driver studies for neutrino and muon factories”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAY01, pp. 64-68.
- C. Benabderrahmane et al., “Development of Pr2Fe14B Cryogenic Undulator CPMU at SOLEIL”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPA24, pp. 523-526.
- J. Repond, H. Damerau, A. Lasheen, and E. N. Shaposhnikova, “Lower-Harmonic RF System in the CERN SPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3087-3090.
- D. J. Dunning et al., “Start-to-End Simulations of the CLARA FEL Test Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4430-4433.
- K. Shafak et al., “Synchronous Laser-Microwave Network for Attosecond-Resolution Photon Science”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 286-289.
- S. Blanchard, R. Ferreira, P. Gomes, G. Pigny, and A. P. Rocha, “Integration of Wireless Mobile Equipment in Supervisory Application”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1103.
- I. Dolenc Kittelmann et al., “Ionisation Chamber Based Beam Loss Monitoring System for the ESS Linac”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 136-140.
- Y. J. Pei et al., “Commissioning of the Compact 14MeV LINAC for an FEL-Based THz Source”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 509-511.
- X. Singer, A. Ermakov, A. Matheisen, A. Schmidt, and W. Singer, “Structure of the Electron Beam Welding Connections”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO074, pp. 412-412.
- S. Schnepp, E. Gjonaj, and T. Weiland, “A Time-Adaptive Mesh Approach for the Self-Consistent Simulation of Particle Beams”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUPPP26, pp. 132-135.
- N. Tsoupas et al., “Design of Beam Transfer Lines for the NSLS II”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS102, pp. 664-666.
- P. H??lsmann et al., “Development of a new Broadband Accelerating System for the SIS18 Upgrade at GSI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD029, pp. 744-746.
- T. L. Houck and G. A. Westenskow, “Status of the Choppertron Experiments”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-65, pp. 498-500.
- C. Piel, “Highly Customized Industrialized Linacs for Applications in Scientific Research”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEIM04, pp. 1967-1971.
- M. Krasilnikov, J. W. Baehr, M. H?ñnel, F. Stephan, and I. Will, “Experimental Optimization of the Cathode Laser Temporal Profile”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB29, pp. 135-137.
- K. M. Thompson, S. Kim, R. Lari, and L. R. Turner, “Quadrupole Magnet for the APS Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 396-399.
- D. Dohan et al., “Requirements for a New Resonator Structure at TRIUMF”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J06, pp. 357-359.
- R. Merl and T. Spickermann, “Use of a Reconfigurable VME Module To Measure Beam Energy at the Los Alamos Proton Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT019, pp. 1658-1660.
- A. K. Ciftci, S. Sultansoy, and O. Yavas, “Linac*LHC based ep, gamma-p, eA, gamma-A and FEL gamma-A Colliders”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP2A18, pp. 391-396.
- A. M. Tremaine et al., “Inverse Free Electron Laser Accelerators for Driving Compact Light Sources and Detection Applications”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOBN2, pp. 1-3.
- G. Bisoffi et al., “Hardware Commissioning of the Renovated PIAVE Injector at INFN-LNL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 949-952.
- T. Watanabe et al., “Calibration for Beam Energy Position Monitor System for Riken Superconducting Acceleration Cavity”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 526-529.
- J. Fitzek, H. C. Hüther, R. Mueller, and A. Schaller, “First Production Use of the New Settings Management System for FAIR”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1512-1516.
- B. Walasek-Hoehne et al., “Optical Transition Radiation for Non-relativistic Ion Beams”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3C01, pp. 580-582.
- Y. E. Tan, D. R. T. Appadoo, M. J. Boland, and R. T. Dowd, “Low Alpha Configuration for Generating Short Bunches”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP009, pp. 3711-3713.
- R. Fliller III et al., “New Results from Crystal Collimation at RHIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB034, pp. 1691-1693.
- T. Mitsumoto et al., “Design Study of Sector Magnets of Superconducting Ring Cyclotron for the RIKEN RI Beam Factory”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-18, pp. 237-240.
- M. M. El-Ashmawy, G. D'Auria, M. M. Dehler, J.-Y. Raguin, G. Riddone, and R. Zennaro, “Single Bunch Wakefields in the CERN-PSI-ELETTRA X-band Linear Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD032, pp. 1997-1999.
- S. L. Kramer, R. Biscardi, and G. Ramirez, “Bunch Length Control in the VUV Light Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1874-1877.
- R. J. Reid, “Vacuuum System Design and Performance for the Daresbury HBL”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1337-1340.
- N. Schwarz, F. De Carlo, A. Glowacki, J. P. Hammonds, F. Khan, and K. Yue, “Experiment Control and Analysis for High-Resolution Tomography”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOAAB03, pp. 1469-1472.
- Yu. M. Ado et al., “Peculiarities of the IHEP Accelerator Complex Operation with the Fast-Cycling Booster”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 303-305.
- G. Cox et al., “Status of the ERLP Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB38, pp. 244-246.
- S. A. Cherenshchykov, “Cold-Cathode Kiloampere Electron Gun with Secondary Emission at Relativistic Voltage”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP096, pp. 1522-1524.
- F. Touze and G. Le Meur, “A Non Conforming Finite Element Method for Computing Eigenmodes of Resonant Cavities”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1696-1699.
- F. Blas et al., “Conversion of the PS Complex as LHC Proton Pre-Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W011, pp. 973-975.
- G. A. Decker and O. V. Singh, “Orbit Feedback Using X-ray Beam Position Monitoring at the Advanced Photon Source”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WECI001, pp. XX-XX.
- B. Wiik, “The Status of HERA”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 351-356.
- K. Cerff, W. Mexner, and T. Spangenberg, “The ANKA B-Field Test Facility Control System, based on a SPEC Macro Package Enhanced Setup”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL014, pp. 156-158.
- B. Franksen, B. Kuner, and T. Birke, “Experiences: Configuration Management with a Generic RDB Data-Model”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA37, pp. 594-596.
- S. V. Kuzikov, S. P. Antipov, P. V. Avrakhov, E. W. Knight, J. G. Power, and Y. Zhao, “Diamond Beam Halo Monitor”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 197-201.
- D. Prasuhn et al., “Status of the Cooler Synchrotron COSY Juelich”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH054, pp. 3350-3352.
- M. Seebach, M. Werner Deutsches Elektronen-Synchrotron, H. Franz, and A. Ehnes Deutsches Elektronen-Synchrotron, “Parasitic Bunch Measurement in e+/e- Storage Rings”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM24, pp. XX-XX.
- M. Pezzetti, C. F. Fluder, and R. Orlandi, “CERN Neutrino Cryogenic Control System Technology: From the WA105 Test Facility to the NP04 and NP02 Platforms”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1210.
- O. Gutzwiller et al., “Status of the ATLAS Detector Control System and Common Infrastructure Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP103, pp. 316-318.
- R. K. Agrawal et al., “Synchronous Ramping Scheme for SRS INDUS-2”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_017.
Back to search