Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Bado, M. Dugan, A. A. Said, K. J. Suthar, A. Zholents, and A. E. Siy, “Fabrication of the Transition Section of a Corrugated Wakefield Accelerator via Laser Micromachining”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 175. doi:10.18429/JACoW-MEDSI2020-TUPB15
[n] H. G. Blosser and J. W. Butler, “Experimental Facilities and Resolution Capability of the MSU Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63D02, pp. XX-XX.
[n] M. Kelly et al., “Installation and commissioning of the APS-U bunch lengthening system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2713-2716. doi:10.18429/JACoW-IPAC2024-WEPS10
[n] K. Szamota-Leandersson et al., “PolFEL ÔÇö New Facility in Poland”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 746-748. doi:10.18429/JACoW-FEL2019-THP081
[n] A. Roy et al., “Use of Piezoelectric Actuator to Frequency Lock Superconducting Quarter Wave Resonator”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP017, pp. 815-817.
[n] V. Michel et al., “BLISS - Experiments Control for ESRF Beamline”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 26-29. doi:10.18429/JACoW-PCaPAC2018-WEP02
[n] K. Hasegawa et al., “Development of an Injector Section for the High Intensity Proton Accelerator at JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP05L, pp. 749-751.
[n] I. Issury, J-P. Airiau, and Y. Tranquille-Marques, “The Laser Megajoule Facility Status Report”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 498-503. doi:10.18429/JACoW-ICALEPCS2023-TUPDP010
[n] A. Y. Murokh et al., “Re-Circulated Inverse Compton Scattering X-ray Source for Industrial Applications”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP002, pp. 2139-2141.
[n] M. Nishiura, T. Katayama, T. Tanabe, A. O. Sidorin, E. M. Syresin, and I. Watanabe, “Design of the ACR Electron Cooler at RIKEN”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE084, pp. 1377-1379.
[n] T. Tan, M. A. Wolak, X. Xi, L. Civale, and T. Tajima, “Increase in Vortex Penetration Field on Nb Ellipsoid Coated With a MbB2 Thin Film”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUBA06, pp. 512-515.
[n] J. Dabrowski, C. Nielson, W. Rambo, E. Zitvogel, and J. Kulesza, “NSLS Control System Interface to Parker 6K Motion Controller System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_040.
[n] W. Namkung et al., “Status of PLS 2 GeV Linac Project”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 575-578.
[n] S. Arai et al., “Performance of the RNB Linac at KEK-Tanashi”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07B, pp. 770-772.
[n] S. I. Sosa Guitron, J. R. Delayen, and V. S. Morozov, “Modeling Local Crabbing Dynamics in the JLEIC Ion Collider Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3022-3024. doi:10.18429/JACoW-IPAC2017-WEPIK043
[n] J. S. Schmidt, J. Haeuser, O. K. Kester, J. M. Maus, N. Mueller, and A. Schempp, “Tuning of the 4-rod RFQ for MSU”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD035, pp. 762-764.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Bado, M. Dugan, A. A. Said, K. J. Suthar, A. Zholents, and A. E. Siy, “Fabrication of the Transition Section of a Corrugated Wakefield Accelerator via Laser Micromachining”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 175.
- H. G. Blosser and J. W. Butler, “Experimental Facilities and Resolution Capability of the MSU Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63D02, pp. XX-XX.
- M. Kelly et al., “Installation and commissioning of the APS-U bunch lengthening system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS10, pp. 2713-2716.
- K. Szamota-Leandersson et al., “PolFEL ÔÇö New Facility in Poland”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 746-748.
- A. Roy et al., “Use of Piezoelectric Actuator to Frequency Lock Superconducting Quarter Wave Resonator”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP017, pp. 815-817.
- V. Michel et al., “BLISS - Experiments Control for ESRF Beamline”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 26-29.
- K. Hasegawa et al., “Development of an Injector Section for the High Intensity Proton Accelerator at JAERI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP05L, pp. 749-751.
- I. Issury, J-P. Airiau, and Y. Tranquille-Marques, “The Laser Megajoule Facility Status Report”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP010, pp. 498-503.
- A. Y. Murokh et al., “Re-Circulated Inverse Compton Scattering X-ray Source for Industrial Applications”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP002, pp. 2139-2141.
- M. Nishiura, T. Katayama, T. Tanabe, A. O. Sidorin, E. M. Syresin, and I. Watanabe, “Design of the ACR Electron Cooler at RIKEN”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE084, pp. 1377-1379.
- T. Tan, M. A. Wolak, X. Xi, L. Civale, and T. Tajima, “Increase in Vortex Penetration Field on Nb Ellipsoid Coated With a MbB2 Thin Film”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUBA06, pp. 512-515.
- J. Dabrowski, C. Nielson, W. Rambo, E. Zitvogel, and J. Kulesza, “NSLS Control System Interface to Parker 6K Motion Controller System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_040.
- W. Namkung et al., “Status of PLS 2 GeV Linac Project”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 575-578.
- S. Arai et al., “Performance of the RNB Linac at KEK-Tanashi”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP07B, pp. 770-772.
- S. I. Sosa Guitron, J. R. Delayen, and V. S. Morozov, “Modeling Local Crabbing Dynamics in the JLEIC Ion Collider Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3022-3024.
- J. S. Schmidt, J. Haeuser, O. K. Kester, J. M. Maus, N. Mueller, and A. Schempp, “Tuning of the 4-rod RFQ for MSU”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD035, pp. 762-764.
Back to search