Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
[n] L. Dallin, D. Lowe, and J. Swirsky, “Canadian Light Source Magnets”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB068, pp. 2195-2197.
[n] C. Bieth and A. Laisne, “A Very Compact Protontherapy Facility Based on an Extensive Use of High Temperature Superconductors (HTS)”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper J-03, pp. 669-672.
[n] C. Jako, N. Hower, and T. Simon, “Installation and Thermal Design of Synchrotron Radiation Beam Ports at SPEAR”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3851-3854.
[n] V. Kamerdzhiev et al., “BPM System Upgrade at COSY”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 303-306. doi:10.18429/JACoW-IBIC2018-TUPC04
[n] J.-L. Pellegrin, “Transverse Oscillations Damping with Wide-Band Feedback on SPEAR II”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1500-1505.
[n] Y. Shoji, “Multi-Element Corrector Magnet for the Storage Ring NewSUBARU”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB007, pp. 289-291.
[n] Y. Wang, K. J. Morris, V. P. Suller, and S. Wang, “Progress in Raising the Energy of the CAMD Linac to 300 MeV”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC095, pp. 2216-2218.
[n] A. Gotz, J. M. Chaize, and A. Delorme, “TANGO Steps Toward Industry”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC078, pp. 277-280.
[n] Y. A. Fomin et al., “First Operation of New Electron Beam Orbit Measurement System at SIBERIA-2”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC051, pp. 1186-1188.
[n] P. Goudket, S. R. Buckley, L. S. Cowie, A. E. Wheelhouse, and G. Burt, “Prototype Refinement of the VELA Transverse Deflecting Cavity Design”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI064, pp. 2842-2844.
[n] E. D. Courant, “Injection into the BNL AGS”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 9-02, pp. 301-310.
[n] J. B. Flanz, “Symmetry Corrected Second Order Achromat”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1349-1352.
[n] R. Mariotti, W. Buxton, R. Frankel, and L. Hoff, “Generic Device Controller for Accelerator Control Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 600-603.
[n] S. V. Kutsaev et al., “Design of the High Gradient Negative Harmonic Structure for Compact Ion Therapy Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 160-162. doi:10.18429/JACoW-LINAC2018-MOPO077
[n] E. Feldmeier, Th. Haberer, A. Peters, C. Sch?Âmers, and R. Steiner, “Magnetic Field Correction in Normal Conducting Synchrotrons”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD004, pp. 675-677.
[n] V. A. Isaev, N. Claesson, M. Plesko, and K. Zagar, “EPICS Data Acquisition Device Support”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC059, pp. 707-709.
[n] W. Le Coz, C. Doutresssoulles, C. Jamet, G. Ledu, S. Loret, and C. Potier de courcy, “Measurement and Control of the Beam Energy for the SPIRAL2 Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF32, pp. 897-899.
[n] P. Brown, E. Ciapala, G. Geschonke, and E. Peschardt, “Operation of Superconducting Cavities in LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 54-57.
[n] A. Devred, “High Field Accelerator Magnets Beyond LHC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAB002, pp. 146-150.
[n] E. R. Moog, M. Abliz, R. J. Dejus, J. H. Grimmer, and M. S. Jaski, “Design of a 17.2-mm-Period Planar Undulator for the APS”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM10, pp. 1067-1069.
[n] S. V. Kutsaev et al., “A New Thermionic RF Electron Gun for Synchrotron Light Sources”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 453-456. doi:10.18429/JACoW-NAPAC2016-TUB3CO04
[n] C. F. Fluder, V. Lefebvre, M. Pezzetti, A. Tovar, P. Plutecki, and T. Wolak, “Automation of the Software Production Process for Multiple Cryogenic Control Applications”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 375-379. doi:10.18429/JACoW-ICALEPCS2017-TUPHA006
[n] Y. Shoji and T. Takahashi, “Coherent Synchrotron Radiation Burst from Electron Storage Ring under External RF Modulation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC048, pp. 178-180.
[n] Y. I. Ida et al., “Development of Vertical Electropolishing Facility for Nb 9-cell Cavity (2)”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 494-495. doi:10.18429/JACoW-LINAC2018-TUPO069
[n] M. B. Andorf and P. Piot, “Planned Detection and Amplification of Infared Synchrotron Radiation for Electron-Beam Diagnostics and Manipulations”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3358-3360. doi:10.18429/JACoW-IPAC2018-THPAK058
[n] M. Ruf, L. Schmidt, U. Erlangen-Nurnberg LHFT, and S. Setzer, “Experimental Verification of Particle-in-Cell Simulation Results Concerning Capacitive Pickup Devices”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD10, pp. 65-67.
[n] F. Yaman, W. Ackermann, and T. Weiland, “Comparison of Eigenvalue Solvers for Large Sparse Matrix Pencils”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRSAC2, pp. 287-289.
[n] D. Bostic, U. Cummings, N. Dean, B. Jeong, and J. Jurow, “Vacuum System for the Stanford-LBL Storage Ring (PEP)”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1540-1544.
[n] D. Gurd et al., “Recent Developments in the TRIUMF Control System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 631-634.
[n] L. Pavlovic et al., “Developments at Elettra of the Electronics for the Bunch-Arrival Monitor”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC02, pp. 310-312.
[n] R. Hettel, D. Mostowfi, R. Ortiz, and J. Sebek, “Triggers and Timing System for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1478-1481.
[n] W. Scandale et al., “Controlling Field Quality in Magnet Production”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAB009, pp. 173-175.
[n] S. P. Kearney, D. Shu, and T. S. Toellner, “The Design of a Precision Mechanical Assembly for a Hard X-ray Polarizer”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 116-120. doi:10.18429/JACoW-MEDSI2016-TUBA01
[n] A. Faltens, D. Keefe, C. Kim, S. Rosenblum, M. Tiefenback, and A. Warwick, “Quadrupole Transport Experiment with Space Charge Dominated Cesium Ion Beam”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WED0008, pp. 312-314.
[n] Y. Shoji, K. Takeda, T. Asaka, Y. Minagawa, S. Suzuki, and Y. Takemura, “Electron Storage Ring as a Single Shot Linac Beam Monitor”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUCC01, pp. 302-306.
[n] G. Cavallari, I. Gorine, D. G??sewell, and R. Stierlin, “Pressure Protection Against Vacuum Failures on the Cryostats for LEP SC Cavities”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G28, pp. XX-XX.
[n] R. J. Macek, A. A. Browman, R. C. McCrady, L. Rybarcyk, and T. Zaugg, “Recent Observations, Experiments and Simulations of Electron Cloud Buildup in Drift Spaces and Quadrupole Magnets at the Los Alamos PSR”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP079, pp. 4722-4724.
[n] N. Guillotin et al., “Operation of SOLEIL with the Two 352 MHz Cryomodules in the Storage Ring”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO030, pp. 268-268.
[n] P. Anger et al., “Beam Diagnostics for SPIRAL2 RNB Facility”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD30, pp. 116-118.
[n] Y. Shoji, “Analytical Formula for the Transient Bunch Lengthening by a Betatron Motion along Bending Sections”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD089, pp. 4494-4496.
[n] C.-Y. Tan et al., “A Perpendicular Biased 2nd Harmonic Cavity for the Fermilab Booster”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3358-3360. doi:10.18429/JACoW-IPAC2015-WEPTY037
[n] I. S. Lehrman et al., “The Grumman/Brookhaven High-Brightness, High-Duty Factor RF Gun”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU2-02, pp. 280-284.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
- L. Dallin, D. Lowe, and J. Swirsky, “Canadian Light Source Magnets”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB068, pp. 2195-2197.
- C. Bieth and A. Laisne, “A Very Compact Protontherapy Facility Based on an Extensive Use of High Temperature Superconductors (HTS)”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper J-03, pp. 669-672.
- C. Jako, N. Hower, and T. Simon, “Installation and Thermal Design of Synchrotron Radiation Beam Ports at SPEAR”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3851-3854.
- V. Kamerdzhiev et al., “BPM System Upgrade at COSY”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 303-306.
- J.-L. Pellegrin, “Transverse Oscillations Damping with Wide-Band Feedback on SPEAR II”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1500-1505.
- Y. Shoji, “Multi-Element Corrector Magnet for the Storage Ring NewSUBARU”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB007, pp. 289-291.
- Y. Wang, K. J. Morris, V. P. Suller, and S. Wang, “Progress in Raising the Energy of the CAMD Linac to 300 MeV”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC095, pp. 2216-2218.
- A. Gotz, J. M. Chaize, and A. Delorme, “TANGO Steps Toward Industry”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC078, pp. 277-280.
- Y. A. Fomin et al., “First Operation of New Electron Beam Orbit Measurement System at SIBERIA-2”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC051, pp. 1186-1188.
- P. Goudket, S. R. Buckley, L. S. Cowie, A. E. Wheelhouse, and G. Burt, “Prototype Refinement of the VELA Transverse Deflecting Cavity Design”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI064, pp. 2842-2844.
- E. D. Courant, “Injection into the BNL AGS”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 9-02, pp. 301-310.
- J. B. Flanz, “Symmetry Corrected Second Order Achromat”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1349-1352.
- R. Mariotti, W. Buxton, R. Frankel, and L. Hoff, “Generic Device Controller for Accelerator Control Systems”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 600-603.
- S. V. Kutsaev et al., “Design of the High Gradient Negative Harmonic Structure for Compact Ion Therapy Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 160-162.
- E. Feldmeier, Th. Haberer, A. Peters, C. Sch?Âmers, and R. Steiner, “Magnetic Field Correction in Normal Conducting Synchrotrons”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD004, pp. 675-677.
- V. A. Isaev, N. Claesson, M. Plesko, and K. Zagar, “EPICS Data Acquisition Device Support”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC059, pp. 707-709.
- W. Le Coz, C. Doutresssoulles, C. Jamet, G. Ledu, S. Loret, and C. Potier de courcy, “Measurement and Control of the Beam Energy for the SPIRAL2 Accelerator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF32, pp. 897-899.
- P. Brown, E. Ciapala, G. Geschonke, and E. Peschardt, “Operation of Superconducting Cavities in LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 54-57.
- A. Devred, “High Field Accelerator Magnets Beyond LHC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAB002, pp. 146-150.
- E. R. Moog, M. Abliz, R. J. Dejus, J. H. Grimmer, and M. S. Jaski, “Design of a 17.2-mm-Period Planar Undulator for the APS”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM10, pp. 1067-1069.
- S. V. Kutsaev et al., “A New Thermionic RF Electron Gun for Synchrotron Light Sources”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 453-456.
- C. F. Fluder, V. Lefebvre, M. Pezzetti, A. Tovar, P. Plutecki, and T. Wolak, “Automation of the Software Production Process for Multiple Cryogenic Control Applications”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 375-379.
- Y. Shoji and T. Takahashi, “Coherent Synchrotron Radiation Burst from Electron Storage Ring under External RF Modulation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC048, pp. 178-180.
- Y. I. Ida et al., “Development of Vertical Electropolishing Facility for Nb 9-cell Cavity (2)”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 494-495.
- M. B. Andorf and P. Piot, “Planned Detection and Amplification of Infared Synchrotron Radiation for Electron-Beam Diagnostics and Manipulations”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3358-3360.
- M. Ruf, L. Schmidt, U. Erlangen-Nurnberg LHFT, and S. Setzer, “Experimental Verification of Particle-in-Cell Simulation Results Concerning Capacitive Pickup Devices”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD10, pp. 65-67.
- F. Yaman, W. Ackermann, and T. Weiland, “Comparison of Eigenvalue Solvers for Large Sparse Matrix Pencils”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper FRSAC2, pp. 287-289.
- D. Bostic, U. Cummings, N. Dean, B. Jeong, and J. Jurow, “Vacuum System for the Stanford-LBL Storage Ring (PEP)”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1540-1544.
- D. Gurd et al., “Recent Developments in the TRIUMF Control System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 631-634.
- L. Pavlovic et al., “Developments at Elettra of the Electronics for the Bunch-Arrival Monitor”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC02, pp. 310-312.
- R. Hettel, D. Mostowfi, R. Ortiz, and J. Sebek, “Triggers and Timing System for the SSRL 3 GeV Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1478-1481.
- W. Scandale et al., “Controlling Field Quality in Magnet Production”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAB009, pp. 173-175.
- S. P. Kearney, D. Shu, and T. S. Toellner, “The Design of a Precision Mechanical Assembly for a Hard X-ray Polarizer”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 116-120.
- A. Faltens, D. Keefe, C. Kim, S. Rosenblum, M. Tiefenback, and A. Warwick, “Quadrupole Transport Experiment with Space Charge Dominated Cesium Ion Beam”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper WED0008, pp. 312-314.
- Y. Shoji, K. Takeda, T. Asaka, Y. Minagawa, S. Suzuki, and Y. Takemura, “Electron Storage Ring as a Single Shot Linac Beam Monitor”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUCC01, pp. 302-306.
- G. Cavallari, I. Gorine, D. G??sewell, and R. Stierlin, “Pressure Protection Against Vacuum Failures on the Cryostats for LEP SC Cavities”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G28, pp. XX-XX.
- R. J. Macek, A. A. Browman, R. C. McCrady, L. Rybarcyk, and T. Zaugg, “Recent Observations, Experiments and Simulations of Electron Cloud Buildup in Drift Spaces and Quadrupole Magnets at the Los Alamos PSR”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP079, pp. 4722-4724.
- N. Guillotin et al., “Operation of SOLEIL with the Two 352 MHz Cryomodules in the Storage Ring”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO030, pp. 268-268.
- P. Anger et al., “Beam Diagnostics for SPIRAL2 RNB Facility”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD30, pp. 116-118.
- Y. Shoji, “Analytical Formula for the Transient Bunch Lengthening by a Betatron Motion along Bending Sections”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD089, pp. 4494-4496.
- C.-Y. Tan et al., “A Perpendicular Biased 2nd Harmonic Cavity for the Fermilab Booster”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3358-3360.
- I. S. Lehrman et al., “The Grumman/Brookhaven High-Brightness, High-Duty Factor RF Gun”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU2-02, pp. 280-284.
Back to search