Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2594-2598. doi:10.18429/JACoW-IPAC2023-WEYD1
[n] P. Piot et al., “Generation of Picosecond Electron-bunch Trains with Variable Spacing Using a Multi-pulse Photocathode Laser”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD077, pp. 2705-2707.
[n] G. S. Sedykh and E. V. Gorbachev, “The Equipment Database for the Control System of the NICA Accelerator Complex”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC012, pp. 1111-1113.
[n] H. Sakai et al., “Development of Input Coupler for Compact ERL Main Linac”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG3006, pp. 91-96.
[n] J. S. Berg, “A Generic Formulation for Emittance and Lattice Function Evolution for Non-Hamiltonian Systems with Stochastic Effects”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 740-742. doi:10.18429/JACoW-IPAC2015-MOPMN018
[n] Y.-M. Shin, “Dielectric-plate-implanted Higher Order Mode (HOM) Waveguide for High Intensity Multi-beam Device Application”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP026, pp. 2781-2783.
[n] N. Yu. Kazarinov, V. Aleksandrov, Y. Jongen, and V. Shevtsov, “Axial Injection Beam-Line of C400 Cyclotron for Hadron Therapy”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN081, pp. 1562-1564.
[n] M. Ounsy, G. Abeille, S. Pierre-Joseph Zephir, K. S. Saintin, and E. De Ley, “Integrating a Workflow Engine within a Commercial SCADA to Build End User Applications in a Scientific Environment”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS029, pp. 860-862.
[n] D. Alesini, C. Biscari, A. Ghigo, and F. Marcellini, “Analysis of the Vertical Beam Instability in CTF3 Combiner Ring and New RF Deflector Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP125, pp. 2791-2793.
[n] V. Tzoganis, A. Jeff, and C. P. Welsch, “Experimental Results of a Gas Jet Based Beam Profile Monitor”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3559-3562. doi:10.18429/JACoW-IPAC2014-THPME134
[n] L. C. Deacon et al., “Development of a Spectrometer for Proton Driven Plasma Wakefield Accelerated Electrons at AWAKE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2601-2604. doi:10.18429/JACoW-IPAC2015-WEPWA045
[n] Y.-M. Shin, “PBG-slab Embedded Traveling Wave Structure for Planar Beam Accelerator Application”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP027, pp. 2784-2786.
[n] Yu. Senichev, A. Bogdanov, A. Lehrach, R. Maier, R. T?Âlle, and E. Zaplatin, “Some Features of Beam Dynamics in Superconducting Linac Based on Quarter- and Half-wave Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE107, pp. 1293-1295.
[n] A. Gomez Alonso, “Impact Distribution of the Beam Losses at the LHC Collimators in Case of Magnet Failures”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP068, pp. 2674-2676.
[n] A. Wastl, M. Benedikt, and A. Garonna, “Tomography of Horizontal Phase Space Distribution of a Slow Extracted Proton Beam in the MedAustron High Energy Beam Transfer Line”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3673-3676. doi:10.18429/JACoW-IPAC2015-THPF001
[n] M. Lechman et al., “Managing Infrastructure in the ALICE Detector Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC015, pp. 1122-1124.
[n] K. H. Kim et al., “The PXI and VMEbus supports for the Linux based EPICS”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_083.
[n] B. B. D. Lomberg, A. Jeff, V. Tzoganis, and C. P. Welsch, “Simulations of the Ion Spatial Distribution in a Gas-Curtain Based Beam Profile Monitor”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3563-3565. doi:10.18429/JACoW-IPAC2014-THPME135
[n] C. B. Boccard, A. Bertarelli, A. Dallocchio, M. Gasior, L. Gentini, and A. A. Nosych, “Embedded Collimator Beam Position Monitors”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD18, pp. 80-82.
[n] O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “A New Correction Scheme to Compensate Depolarizing Integer Resonances at ELSA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP003, pp. 1507-1509.
[n] R. Bartolini et al., “OPALS: The Oxford Plasma Accelerator Light Source Project”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH081, pp. 163-166.
[n] J. Barranco, P. K. Skowronski, F. Tecker, and C. Biscari, “Design of the CLIC Drive Beam Recombination Complex”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC022, pp. 1045-1047.
[n] D. Draskovic, C. B. Boccard, O. R. Jones, T. Lefevre, and M. Wendt, “Electromagnetic Design and Optimization of Directivity of Stripline Beam Position Monitors for the High Luminosity Large Hadron Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1051-1053. doi:10.18429/JACoW-IPAC2015-MOPTY053
[n] H. Hassanzadegan, A. Jansson, and K. Strnisa, “System Overview and Preliminary Test Results of the ESS Beam Current Monitor System”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF30, pp. 891-893.
[n] S. P. Yun et al., “Design of 100 MeV Proton Beam Irradiation Facility for the PEFP 100 MeV Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD033, pp. 2579-2581.
[n] F. Locci and S. Magnoni, “IEPLC Framework, Automated Communication in a Heterogeneous Control System Environment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC031, pp. 139-142.
[n] C. Yeckel et al., “Initial Experimental Analysis into the eRHIC Polarized Electron Beam Transport System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1217-1219. doi:10.18429/JACoW-IPAC2014-TUPRO076
[n] B. M. Johnson, A. Hershcovitch, I. G. Brown, F. Liu, and A. Anders, “Results from ZMEVVA: A New Source for Heavy-Ion Accelerators”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2C007, pp. 2678-2680.
[n] A. Neumann et al., “Booster Cavity and Fundamental Power Coupler Design Issues for BERLinPro”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2490-2492. doi:10.18429/JACoW-IPAC2014-WEPRI007
[n] R. Girardot, A. Buteau, M. Ounsy, K. S. Saintin, and G. Viguier, “How the COMETE Framework Enables the Development of GUI Applications Connected to Multiple Data Sources”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FCO204, pp. 240-242.
[n] B. Cauvin, M. Desmons, J. Girard, and P. Letonturier, “Long Term Performance on the Superconducting Cavities of the Saclay Heavy Ion Linac”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I44, pp. XX-XX.
[n] W. Scandale et al., “First Observation of Proton Reflection from Bent Crystals”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS021, pp. 1535-1537.
[n] L. S. Jirden, A. Augustinus, M. Boccioli, P. Ch. Chochula, and L. Wallet, “Device Control in ALICE”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP077, pp. 552-554.
[n] W. Liu, D. S. Doran, R. A. Erck, G. R. Fenske, W. Gai, and V. J. Guarino, “Updates on the Sliding Contact Cooling ILC Positron Source Target Development”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3865-3867. doi:10.18429/JACoW-IPAC2016-THPOR036
[n] J.-H. Jang, H. Jin, and J. Song, “Beam Optics of 180-degree Bending Section including a Charge Stripper”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3291-3293. doi:10.18429/JACoW-IPAC2016-THPMB028
[n] H. Witte, J. S. Berg, and S. Tepikian, “Conceptual Design of the eRHIC Storage Ring Magnets”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2407-2409. doi:10.18429/JACoW-IPAC2018-WEPMF019
[n] A. V. Smirnov et al., “Superconducting Shield for Solenoid of Electron Cooling System”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUPS11, pp. 118-120.
[n] K. T. McDonald et al., “The MERIT High-Power Target Experiment at the CERN PS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE078, pp. 3527-3529.
[n] J. L. L?â et al., “ADAPOS: An Architecture for Publishing ALICE DCS Conditions Data”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 482-485. doi:10.18429/JACoW-ICALEPCS2017-TUPHA042
[n] G. Bassi, H. Mais, A. Bazzani, and G. Turchetti, “Time Evolution of the Particle Distribution in Beam Physics: The Echo Effect”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI041, pp. 1610-1612.
[n] M. O. Hyun, H. C. Jung, and H. J. Kim, “Design and Analysis of Slow Tuner in the Superconducting Cavity of RISP”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP083, pp. 616-618.
[n] M. Marchhart et al., “Extending WinCC OA for Use as Accelerator Control System Core”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC123, pp. 395-398.
[n] M. T. F. Pivi and A. Garonna, “Space Charge Effect Estimation for Synchrotrons with Third-order Resonant Extraction”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3677-3679. doi:10.18429/JACoW-IPAC2015-THPF002
[n] H. Shaker, S. Doebert, R. Leuxe, L. Dassa, and S. Sanaye Hajari, “Sub-harmonic Buncher Design for the CLIC Drive Beam Injector”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME052, pp. 1685-1687.
[n] L. Dassa, D. Cambiaghi, and D. Perini, “Preliminary Design of the AEGIS Test Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA051, pp. 190-192.
[n] O. Pinazza et al., “Managing Information Flow in ALICE”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN015, pp. 124-126.
[n] K. T. Seol et al., “Design of Machine Protection System for the PEFP 100MeV Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR035, pp. 4047-4049.
[n] J. S. Schmidt et al., “The AWAKE Electron Primary Beam Line”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2584-2586. doi:10.18429/JACoW-IPAC2015-WEPWA039
For LaTeX
Use Complete Form
For BibTeX
References
- M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEYD1, pp. 2594-2598.
- P. Piot et al., “Generation of Picosecond Electron-bunch Trains with Variable Spacing Using a Multi-pulse Photocathode Laser”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD077, pp. 2705-2707.
- G. S. Sedykh and E. V. Gorbachev, “The Equipment Database for the Control System of the NICA Accelerator Complex”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC012, pp. 1111-1113.
- H. Sakai et al., “Development of Input Coupler for Compact ERL Main Linac”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG3006, pp. 91-96.
- J. S. Berg, “A Generic Formulation for Emittance and Lattice Function Evolution for Non-Hamiltonian Systems with Stochastic Effects”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 740-742.
- Y.-M. Shin, “Dielectric-plate-implanted Higher Order Mode (HOM) Waveguide for High Intensity Multi-beam Device Application”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP026, pp. 2781-2783.
- N. Yu. Kazarinov, V. Aleksandrov, Y. Jongen, and V. Shevtsov, “Axial Injection Beam-Line of C400 Cyclotron for Hadron Therapy”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN081, pp. 1562-1564.
- M. Ounsy, G. Abeille, S. Pierre-Joseph Zephir, K. S. Saintin, and E. De Ley, “Integrating a Workflow Engine within a Commercial SCADA to Build End User Applications in a Scientific Environment”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS029, pp. 860-862.
- D. Alesini, C. Biscari, A. Ghigo, and F. Marcellini, “Analysis of the Vertical Beam Instability in CTF3 Combiner Ring and New RF Deflector Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP125, pp. 2791-2793.
- V. Tzoganis, A. Jeff, and C. P. Welsch, “Experimental Results of a Gas Jet Based Beam Profile Monitor”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3559-3562.
- L. C. Deacon et al., “Development of a Spectrometer for Proton Driven Plasma Wakefield Accelerated Electrons at AWAKE”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2601-2604.
- Y.-M. Shin, “PBG-slab Embedded Traveling Wave Structure for Planar Beam Accelerator Application”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP027, pp. 2784-2786.
- Yu. Senichev, A. Bogdanov, A. Lehrach, R. Maier, R. T?Âlle, and E. Zaplatin, “Some Features of Beam Dynamics in Superconducting Linac Based on Quarter- and Half-wave Cavities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE107, pp. 1293-1295.
- A. Gomez Alonso, “Impact Distribution of the Beam Losses at the LHC Collimators in Case of Magnet Failures”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP068, pp. 2674-2676.
- A. Wastl, M. Benedikt, and A. Garonna, “Tomography of Horizontal Phase Space Distribution of a Slow Extracted Proton Beam in the MedAustron High Energy Beam Transfer Line”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3673-3676.
- M. Lechman et al., “Managing Infrastructure in the ALICE Detector Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC015, pp. 1122-1124.
- K. H. Kim et al., “The PXI and VMEbus supports for the Linux based EPICS”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_083.
- B. B. D. Lomberg, A. Jeff, V. Tzoganis, and C. P. Welsch, “Simulations of the Ion Spatial Distribution in a Gas-Curtain Based Beam Profile Monitor”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3563-3565.
- C. B. Boccard, A. Bertarelli, A. Dallocchio, M. Gasior, L. Gentini, and A. A. Nosych, “Embedded Collimator Beam Position Monitors”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD18, pp. 80-82.
- O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “A New Correction Scheme to Compensate Depolarizing Integer Resonances at ELSA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP003, pp. 1507-1509.
- R. Bartolini et al., “OPALS: The Oxford Plasma Accelerator Light Source Project”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH081, pp. 163-166.
- J. Barranco, P. K. Skowronski, F. Tecker, and C. Biscari, “Design of the CLIC Drive Beam Recombination Complex”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC022, pp. 1045-1047.
- D. Draskovic, C. B. Boccard, O. R. Jones, T. Lefevre, and M. Wendt, “Electromagnetic Design and Optimization of Directivity of Stripline Beam Position Monitors for the High Luminosity Large Hadron Collider”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1051-1053.
- H. Hassanzadegan, A. Jansson, and K. Strnisa, “System Overview and Preliminary Test Results of the ESS Beam Current Monitor System”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF30, pp. 891-893.
- S. P. Yun et al., “Design of 100 MeV Proton Beam Irradiation Facility for the PEFP 100 MeV Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD033, pp. 2579-2581.
- F. Locci and S. Magnoni, “IEPLC Framework, Automated Communication in a Heterogeneous Control System Environment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC031, pp. 139-142.
- C. Yeckel et al., “Initial Experimental Analysis into the eRHIC Polarized Electron Beam Transport System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1217-1219.
- B. M. Johnson, A. Hershcovitch, I. G. Brown, F. Liu, and A. Anders, “Results from ZMEVVA: A New Source for Heavy-Ion Accelerators”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2C007, pp. 2678-2680.
- A. Neumann et al., “Booster Cavity and Fundamental Power Coupler Design Issues for BERLinPro”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2490-2492.
- R. Girardot, A. Buteau, M. Ounsy, K. S. Saintin, and G. Viguier, “How the COMETE Framework Enables the Development of GUI Applications Connected to Multiple Data Sources”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FCO204, pp. 240-242.
- B. Cauvin, M. Desmons, J. Girard, and P. Letonturier, “Long Term Performance on the Superconducting Cavities of the Saclay Heavy Ion Linac”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I44, pp. XX-XX.
- W. Scandale et al., “First Observation of Proton Reflection from Bent Crystals”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS021, pp. 1535-1537.
- L. S. Jirden, A. Augustinus, M. Boccioli, P. Ch. Chochula, and L. Wallet, “Device Control in ALICE”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP077, pp. 552-554.
- W. Liu, D. S. Doran, R. A. Erck, G. R. Fenske, W. Gai, and V. J. Guarino, “Updates on the Sliding Contact Cooling ILC Positron Source Target Development”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3865-3867.
- J.-H. Jang, H. Jin, and J. Song, “Beam Optics of 180-degree Bending Section including a Charge Stripper”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3291-3293.
- H. Witte, J. S. Berg, and S. Tepikian, “Conceptual Design of the eRHIC Storage Ring Magnets”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2407-2409.
- A. V. Smirnov et al., “Superconducting Shield for Solenoid of Electron Cooling System”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper TUPS11, pp. 118-120.
- K. T. McDonald et al., “The MERIT High-Power Target Experiment at the CERN PS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE078, pp. 3527-3529.
- J. L. L?â et al., “ADAPOS: An Architecture for Publishing ALICE DCS Conditions Data”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 482-485.
- G. Bassi, H. Mais, A. Bazzani, and G. Turchetti, “Time Evolution of the Particle Distribution in Beam Physics: The Echo Effect”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI041, pp. 1610-1612.
- M. O. Hyun, H. C. Jung, and H. J. Kim, “Design and Analysis of Slow Tuner in the Superconducting Cavity of RISP”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP083, pp. 616-618.
- M. Marchhart et al., “Extending WinCC OA for Use as Accelerator Control System Core”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC123, pp. 395-398.
- M. T. F. Pivi and A. Garonna, “Space Charge Effect Estimation for Synchrotrons with Third-order Resonant Extraction”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3677-3679.
- H. Shaker, S. Doebert, R. Leuxe, L. Dassa, and S. Sanaye Hajari, “Sub-harmonic Buncher Design for the CLIC Drive Beam Injector”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME052, pp. 1685-1687.
- L. Dassa, D. Cambiaghi, and D. Perini, “Preliminary Design of the AEGIS Test Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA051, pp. 190-192.
- O. Pinazza et al., “Managing Information Flow in ALICE”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN015, pp. 124-126.
- K. T. Seol et al., “Design of Machine Protection System for the PEFP 100MeV Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR035, pp. 4047-4049.
- J. S. Schmidt et al., “The AWAKE Electron Primary Beam Line”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2584-2586.
Back to search