JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. Gonnella et al., “Industrial Cavity Production: Lessons Learned to Push the Boundaries of Nitrogen-Doping”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1199-1205. doi:10.18429/JACoW-SRF2019-FRCAA3
[n]	Y. Renier, P. Bambade, B. Bolzon, T. Okugi, A. Scarfe, and G. R. White, “Orbit Reconstruction, Correction, Stabilization and Monitoring in the ATF2 Extraction Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP004, pp. 4311-4313. 
[n]	G. Ciavola et al., “Comparison of Operations of the SERSE Ion Source at 18 and 28 GHz”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH304, pp. 2409-2411. 
[n]	A. Caracappa, C. Danneil, R. P. Fliller, D. Padrazo, and O. Singh, “A PPS Compliant Injected Charge Monitor at NSLS-II”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 422-425. doi:10.18429/JACoW-IBIC2016-TUPG37
[n]	P. P. Schneider, M. Droba, O. Meusel, H. Podlech, A. Schempp, and D. Noll, “Beam Characterization of the MYRRHA-RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 830-833. doi:10.18429/JACoW-LINAC2018-THPO061
[n]	V. Skalyga et al., “Gasdynamic ECR Sources of Multicharged Ions”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper TUCO-A02, pp. 128-130. 
[n]	A. Hershcovitch et al., “Versatile Device for In-situ Discharge Cleaning and Multiple Coatings of Long, Small Diameter Tubes”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA082, pp. 1509-1511. 
[n]	S. Jin, X. Y. Lu, K. Zhao, R. A. Rimmer, and A. T. Wu, “Study of I-V Characteristics at Different Locations Inside a Demountable Nb SRF Cavity During Vertical BEP and EP Treatments”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO033, pp. 450-455. 
[n]	I. Izotov et al., “High Current Low Emittance Proton And Deuteron Beam Production at SMIS 37”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 604-606. doi:10.18429/JACoW-IPAC2014-MOPRI012
[n]	H. Wang et al., “Injector Cavities Fabrication, Vertical Test Performance and Primary Cryomodule Design”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3551-3553. doi:10.18429/JACoW-IPAC2015-WEPWI030
[n]	N. Tsoupas, J. S. Berg, S. J. Brooks, F. M?®ot, V. Ptitsyn, and D. Trbojevic, “Calculation of the AGS Optics Based on 3D Fields Derived From Experimentally Measured Fields on Median Plane”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 209-214. doi:10.18429/JACoW-ICAP2018-TUPAF13
[n]	S. J. Brooks, “Vertical Orbit Excursion FFAG Accelerators with Edge Focussing”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD019, pp. 406-408. 
[n]	J. Eberhardt, F. Caspers, and C. Vollinger, “Ferrite Material Characterization in a Static Bias Field for the Design of a Tunable Cavity”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3890-3892. doi:10.18429/JACoW-IPAC2014-THPRI053
[n]	O. Mete et al., “Emittance Growth due to Multiple Coulomb Scattering in a Linear Collider based on Plasma Wakefield Acceleration”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1211-1213. doi:10.18429/JACoW-IPAC2014-TUPRO074
[n]	N. V. Kulabukhova, S. N. Andrianov, A. Bogdanov, and A. Degtyarev, “Simulation of Space Charge Dynamics on HPC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1609-1611. doi:10.18429/JACoW-IPAC2014-TUPRI024
[n]	H. Saito et al., “Crossed-Undulator Configuration for Variable Polarized THz Source”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 69-72. doi:10.18429/JACoW-FEL2019-TUP014
[n]	J. F. Schmidt, O. Boldt, F. Frommberger, and W. Hillert, “Simulating Spin Dynamics and Depolarization using POLE”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO005, pp. 891-893. 
[n]	K. Yezza, H. Henke, and R. Lorenz, “Beam Position Monitor Developments for TESLA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1533-1536. 
[n]	K. Yamamoto, H. Harada, J. Kamiya, Y. Yamazaki, and M. Yoshimoto, “Foil Scattering Loss Mitigation by the Additional Collimation System of J-PARC RCS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS033, pp. 1605-1607. 
[n]	J. Ruan et al., “Commissioning Status of the Advanced Superconducting Test Accelerator at Fermilab”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2615-2617. doi:10.18429/JACoW-IPAC2014-WEPRI058
[n]	W. Scandale, “Status of UA9, the Crystal Collimation Experiment in the SPS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUOAA02, pp. 897-899. 
[n]	M. N. Nguyen, C. Burkhart, K. J. P. Macken, and J. J. Olsen, “Compact, Intelligent, Digitally Controlled IGBT Gate Drivers for a PEBB-based ILC Marx Modulator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD100, pp. 3335-3337. 
[n]	S. Jolly, L. C. Deacon, J. A. Goodhand, S. R. Mandry, and M. Wing, “A Spectrometer for Proton Driven Plasma Wakefield Accelerated Electrons at AWAKE”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1540-1543. doi:10.18429/JACoW-IPAC2014-TUPME079
[n]	H. Harada, K. Yamamoto, and M. Yoshimoto, “Upgrade of Ionization Profile Monitor (IPM) in the J-PARC 3-GeV RCS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR029, pp. 840-842. 
[n]	A. Meoli, A. Blas, and R. Louwerse, “CERN PS Booster Transverse Damper: 10 kHz - 200 MHz Radiation Tolerant Amplifier for Capacitive PU Signal Conditioning”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 315-318. doi:10.18429/JACoW-IBIC2016-TUPG04
[n]	D. Barni and C. Pagani, “Conceptual Design of the Cryomodule for the TRASCO SC Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7B06, pp. 2022-2024. 
[n]	J. Eberhardt, F. Caspers, and C. Vollinger, “Preliminary Design of a Perpendicular Biased Ferrite Loaded Accelerating Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3163-3166. doi:10.18429/JACoW-IPAC2015-WEPHA024
[n]	B. Cauvin et al., “Fabrication, Tests, and RF Control of the 50 Superconducting Resonators of the Saclay Heavy Ion Linac”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87D02, pp. XX-XX. 
[n]	C. Wiesner et al., “Chopping High-Intensity Ion Beams at FRANZ”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper WEIOB01, pp. 765-769. 
[n]	C. Ohmori et al., “High Field Gradient RF System for Bunch Rotation in PRISM-FFAG”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP103, pp. 796-798. 
[n]	M. Tomizawa, M. Aoki, and I. Itahashi, “J-PARC Accelerator Scheme for Muon to Electron Conversion Search”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC128, pp. 367-369. 
[n]	M. Juillard, B. Aune, B. Bonin, and L. Wartski, “Superconducting Surface Resistance Measurements with a TE011 Cavity”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1106-1109. 
[n]	Zh. X. Tang, X. M. Yang, W. Q. Zhang, Y. J. Pei, and Y. Yu, “Optimal Design of a Photocathode Electron Gun with High-brightness and High-repetition Rate Based on Genetic Algorithm”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3947-3950. doi:10.18429/JACoW-IPAC2016-THPOW009
[n]	T. Dritschler, S. A. Chilingaryan, T. Farago, A. Kopmann, and M. Vogelgesang, “InfiniBand interconnects for high-throughput data acquisition in a TANGO environment”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO001, pp. 161-163. 
[n]	E. Bressi, L. Falbo, C. Priano, M. Pullia, and C. Biscari, “Optics of Extraction Lines at CNAO”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC012, pp. 1179-1181. 
[n]	B. Balhan et al., “Design and Construction of the CERN SPS Extraction Protection Elements for LIU”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2359-2362. doi:10.18429/JACoW-IPAC2019-WEPMP022
[n]	M. M. Rihaoui, D. Mihalcea, P. Piot, W. Gai, and J. G. Power, “Single-Shot Longitudinal Phase Space Measurement Diagnostics Beamline Status at the Argonne Wakefield Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP196, pp. 1858-1860. 
[n]	M. M. Ali and M. G. Tiefenback, “Bunch Length Measurements using Synchrotron Light Monitor”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1143-1145. doi:10.18429/JACoW-IPAC2015-MOPWI002
[n]	S. Serkez et al., “Super-X: Simulations for Extremely Hard X-Ray Generation With Short Period Superconducting Undulators for the European XFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 191-194. doi:10.18429/JACoW-FEL2019-TUP061
[n]	D. Manglunki et al., “Ions for LHC: Performance of the Injector Chain”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS022, pp. 2529-2531. 
[n]	N. A. Huque et al., “BNL 56 MHz HOM Damper Prototype Fabrication at JLab”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3521-3524. doi:10.18429/JACoW-IPAC2015-WEPWI015

For LaTeX

Use Complete Form

For BibTeX

References

Back to search