JaCoW Logo

Reference Search

Favourites


For Word

[n]	N. Milas et al., “Design and Expected Performance of the New SLS Beam Size Monitor”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUCC03, pp. 307-309. 
[n]	M. S. Malovytsia and N. Delerue, “Comparison of the Smith-purcell Radiation Yield for Different Models”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 75-77. doi:10.18429/JACoW-IPAC2016-MOPMB004
[n]	P. Drobniak et al., “Optimization of 200 MeV laser-plasma electron injector target using massive particle-in-cell simulation combined with fluid simulation”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA099, unpublished. 
[n]	F. Belloni, D. Doria, A. Lorusso, and V. Nassisi, “Ion Implantation Via Laser Ion Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH181, pp. 2355-2357. 
[n]	H. S. Uhm, R. C. Davidson, and I. D. Kaganovich, “Vlasov-Maxwell Description of Axisymmetric Two-Stream Instabilities in High-Intensity Particle Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH104, pp. 1912-1914. 
[n]	S. De Santis, M. G. Billing, J. M. Byrd, and J. P. Sikora, “The TE Wave Transmission Method for Electron Cloud Measurements at Cesr-TA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP071, pp. 3606-3608. 
[n]	G. Mayer and D. Voy, “VME Bus Performance in Multiprocessor Systems”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1654-1657. 
[n]	J. A. Benjamin, “Selection of a Vac-Ion Pump for a Terminal Ion Source”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 107-109. 
[n]	M. El Khaldi et al., “The RF System of Thomx”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 551-553. doi:10.18429/JACoW-LINAC2016-TUPLR040
[n]	P. Eyharts et al., “Beam Transport and Characterization on AIRIX Prototype at CESTA”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P072, pp. 1257-1259. 
[n]	I. V. Konoplev, A. Seryi, R. Ainsworth, and G. Burt, “UH-FLUX: Compact, Energy Efficient Superconducting Asymmetric Energy Recovery LINAC for Ultra-high Fluxes of X-ray and THz Radiation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1847-1849. doi:10.18429/JACoW-IPAC2016-TUPOW040
[n]	J. D. Bailey, “Axial Injection and Phase Selection Studies of the MSU K1200 Cyclotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAP09, pp. 372-374. 
[n]	C.-J. Jing, S. H. Gold, A. Kanareykin, S. Kazakov, R. Konecny, and J. G. Power, “Progress towards a Gap Free Dielectric-Loaded Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS073, pp. 3151-3153. 
[n]	F. P. Signol, P. J. Betremieux, J. J. Dupas, J. I. Nicoloso, and J. C. Picon, “Strategy for the Integration of the LMJ (Laser Megajoule) Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOC002, pp. 16-18. 
[n]	R. Ruo et al., “Design of the Low Energy Beam Transport Line for Xi`an Proton Application Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1343-1345. doi:10.18429/JACoW-IPAC2016-TUPMR041
[n]	L. Yu, Y. Li, Y. F. Sui, and J. H. Yue, “Low Intensity Electron Beam Controlling and Monitoring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 292-294. doi:10.18429/JACoW-IPAC2017-MOPAB074
[n]	V. Kubytskyi et al., “Laser-Plasma Acceleration Modeling Approach in the Case of ESCULAP Project.”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3723-3725. doi:10.18429/JACoW-IPAC2019-THPGW059
[n]	T. Long et al., “Harmonic generation from hard X-ray self-seeded free-electron laser”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG28, unpublished. 
[n]	N. Barov, D. J. Newsham, and D. Wu, “Cavity BPM for 1300 MHz Cryomodules”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR088, pp. 993-995. 
[n]	M. Libkind, L. Bertolini, P. Duffy, R. Carr, G. Rakowsky, and J. Skaritka, “Mechanical Design of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP93, pp. 2477-2479. 
[n]	V. P. Suller, D. Einfeld, M. G. Fedurin, J. Hormes, and G. Vignola, “An Advanced Light Source Proposed for the South Eastern USA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF068, pp. 2421-2423. 
[n]	A. Bechtold, M. Otto, U. Ratzinger, A. Schempp, B. Schlitt, and E. Vassilakis, “Beam Test Stand of the RFQ-drifttube-combination for the Therapy Center in Heidelberg”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT041, pp. 2571-2573. 
[n]	C. C. Wilcox, J. C. Medland, S. J. Payne, A. Pertica, and M. A. Probert, “Optimisation of a Split Plate Position Monitor for the ISIS Proton Synchrotron”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC25, pp. 739-741. 
[n]	H. Guler et al., “Power Coupler Design for the LUCRECE Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3732-3735. doi:10.18429/JACoW-IPAC2018-THPAL041
[n]	T. Plawski, G. K. Davis, H. Dong, C. Hovater, J. Musson, and T. Powers, “Digital Cavity Resonance Monitor - Alternative Method of Measuring Cavity Microphonics”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP63, pp. 616-618. 
[n]	W. Hartung et al., “Cryomodule Development at Michigan State University for the Rare Isotope Accelerator”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP37, pp. 547-547. 
[n]	B. P. Xiao et al., “Higher Order Mode Filter Design for Double Quarter Wave Crab Cavity for the LHC High Luminosity Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3627-3629. doi:10.18429/JACoW-IPAC2015-WEPWI059
[n]	D. Dunning et al., “Conclusions from the UK XFEL conceptual design and options analysis study”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB042, unpublished. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search