Favourites
For Word
[n] M.-A. Tordeux et al., “Progress on the New Booster for SOLEIL II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3267-3271. doi:10.18429/JACoW-IPAC2023-WEPL072
[n] C. R. Ader, C. C. Jensen, R. E. Reilly, D. Snee, and J. H. Wilson, “Recent Experience in the Fabrication and Brazing of Ceramic Beam Tubes for Kicker Magnets at FNAL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC139, pp. 2335-2337.
[n] R. Warange and R. E. Braddock, “SKA Synchronization and Timing Local Monitor Control - Software Design Approach”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1190-1194. doi:10.18429/JACoW-ICALEPCS2017-THCPL04
[n] M. Serluca, T. Friedrich, A. Jansson, and C. Plostinar, “The development of aggregation diagrams for high-level planning at the ESS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2305-2308. doi:10.18429/JACoW-IPAC2023-TUPM048
[n] P. Kneisel and K. Saito, “Superconducting Niobium Cavities with High Gradients”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-42, pp. 160-162.
[n] M. T. Gundogan, O. Yavas, A. A. Aydin, E. Kasap, and C. Kaya, “Design, Production and Tests of Button Type BPM for TAC-TARLA IR FEL Facility”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 27-30. doi:10.18429/JACoW-IBIC2016-MOPG01
[n] W. Xu et al., “Beam Commissioning of the SRF 704 MHz Photoemission Gun”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP012, pp. 70-72.
[n] C. M. Gulliford, A. C. Bartnik, I. V. Bazarov, and J. M. Maxson, “Multi-objective Genetic Optimization of Single Shot Ultrafast Electron Diffraction Beamlines”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1615-1617. doi:10.18429/JACoW-IPAC2017-TUPAB126
[n] J. C. Frisch et al., “Performance of the SLC Polarized Electron Source and Injector with the SLAC 3 km Linac Configured for Fixed Target Experiments”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3027-3030.
[n] J. A. Crittenden, “Initial Modeling of Electron Cloud Buildup in the Final-focus Quadrupole Magnets of the SuperKEKB Positron Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2218-2221. doi:10.18429/JACoW-IPAC2015-TUPTY079
[n] D. S. Day, A. Hahn, C. Prados, and M. Reese, “Improving Throughput and Latency of D-Bus to Meet the Requirements of the Fair Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 809-812. doi:10.18429/JACoW-ICALEPCS2017-TUPHA168
[n] Y. Zhang, “Beam Tuning Strategy of the FRIB Linac Driver”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP066, pp. 3889-3891.
[n] H. S. Lee, W. H. Hwang, S. H. Kim, M. H. Cho, I. S. Ko, and W. Namkung, “RF Test Results of Choke Flange for High Power Waveguide Valve”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D021, pp. 130-132.
[n] E. Ergenlik et al., “Instrumentation and operation modes for the commissioning phase of the SEALab SRF photoinjector”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4703-4705. doi:10.18429/JACoW-IPAC2023-THPL103
[n] M. Castellano et al., “Bunch Length Measurements at ADONE”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 869-872.
[n] G. B. Kim et al., “Korea Heavy Ion Medical Accelerator Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4243-4247. doi:10.18429/JACoW-IPAC2016-FRXAA01
For LaTeX
Use Complete Form
For BibTeX
References
- M.-A. Tordeux et al., “Progress on the New Booster for SOLEIL II”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL072, pp. 3267-3271.
- C. R. Ader, C. C. Jensen, R. E. Reilly, D. Snee, and J. H. Wilson, “Recent Experience in the Fabrication and Brazing of Ceramic Beam Tubes for Kicker Magnets at FNAL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC139, pp. 2335-2337.
- R. Warange and R. E. Braddock, “SKA Synchronization and Timing Local Monitor Control - Software Design Approach”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1190-1194.
- M. Serluca, T. Friedrich, A. Jansson, and C. Plostinar, “The development of aggregation diagrams for high-level planning at the ESS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM048, pp. 2305-2308.
- P. Kneisel and K. Saito, “Superconducting Niobium Cavities with High Gradients”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-42, pp. 160-162.
- M. T. Gundogan, O. Yavas, A. A. Aydin, E. Kasap, and C. Kaya, “Design, Production and Tests of Button Type BPM for TAC-TARLA IR FEL Facility”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 27-30.
- W. Xu et al., “Beam Commissioning of the SRF 704 MHz Photoemission Gun”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP012, pp. 70-72.
- C. M. Gulliford, A. C. Bartnik, I. V. Bazarov, and J. M. Maxson, “Multi-objective Genetic Optimization of Single Shot Ultrafast Electron Diffraction Beamlines”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1615-1617.
- J. C. Frisch et al., “Performance of the SLC Polarized Electron Source and Injector with the SLAC 3 km Linac Configured for Fixed Target Experiments”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3027-3030.
- J. A. Crittenden, “Initial Modeling of Electron Cloud Buildup in the Final-focus Quadrupole Magnets of the SuperKEKB Positron Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2218-2221.
- D. S. Day, A. Hahn, C. Prados, and M. Reese, “Improving Throughput and Latency of D-Bus to Meet the Requirements of the Fair Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 809-812.
- Y. Zhang, “Beam Tuning Strategy of the FRIB Linac Driver”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP066, pp. 3889-3891.
- H. S. Lee, W. H. Hwang, S. H. Kim, M. H. Cho, I. S. Ko, and W. Namkung, “RF Test Results of Choke Flange for High Power Waveguide Valve”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D021, pp. 130-132.
- E. Ergenlik et al., “Instrumentation and operation modes for the commissioning phase of the SEALab SRF photoinjector”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL103, pp. 4703-4705.
- M. Castellano et al., “Bunch Length Measurements at ADONE”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 869-872.
- G. B. Kim et al., “Korea Heavy Ion Medical Accelerator Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4243-4247.
Back to search
