JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Favourites


For Word

[n]	F. Yan et al., “Commissioning of the China-ADS Injector-I Testing Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2048-2051. doi:10.18429/JACoW-IPAC2016-WEOBA02
[n]	T. Kobayashi et al., “Development and Construction Status of New LLRF Control System for SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2444-2446. doi:10.18429/JACoW-IPAC2014-WEPME071
[n]	K. Yonehara et al., “Summary of Dense Hydrogen Gas Filled RF Cavity Tests for Muon Acceleration”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI059, pp. 1481-1483. 
[n]	R. Appleby, J. M. Garland, H. L. Owen, S. C. Tygier, and K. M. Hock, “NORMA - The Normal-Conducting, Scaling Racetrack FFAG”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2198-2201. doi:10.18429/JACoW-IPAC2014-WEPRO100
[n]	A. I. Sukhanov, A. Saini, N. Solyak, and I. S. Tropin, “Model of Dark Current in SRF Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1834-1836. doi:10.18429/JACoW-IPAC2015-TUPJE081
[n]	J.-H. Jang, H. Jin, and J. Song, “Beam Optics of 180-degree Bending Section including a Charge Stripper”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3291-3293. doi:10.18429/JACoW-IPAC2016-THPMB028
[n]	M. V. Fazio et al., “Evaluation of Performance, Reliability, and Risk for High Peak Power RF Sources from S-band through X-band for Advanced Accelerator Applications”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THOBB01, pp. 2882-2884. 
[n]	Q. Luo and B. G. Sun, “Cavity-based Multi-parameter Beam Diagnostics at HLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME040, pp. 559-561. 
[n]	L. Elementi et al., “Mu2e AC Dipole 300 kHz and 5.1 MHz Tests and Comparison of Nickel-Zinc Ferrites”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD017, pp. 3533-3535. 
[n]	T. R. Edgecock, “The EUROnu Study for Future High Power Neutrino Oscillation Facilities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1553-1555. doi:10.18429/JACoW-IPAC2014-TUPRI002
[n]	J. J. Zheng, P. Lu, T. J. Ma, B. G. Sun, Y. L. Yang, and J. Y. Zou, “A PRELIMINARY SIMULATION OF BPM SIGNAL DIODE DETECTOR FOR HLS II TUNE MEASUREMENT SYSTEM”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME042, pp. 565-567. 
[n]	L. Xiao et al., “Higher Order Modes Damping Analysis for the SPX Deflecting Cavity Cyromodule”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC086, pp. 2414-2416. 
[n]	V. P. Nagaslaev and I. L. Rakhno, “MARS Tracking Simulations for the Mu2e Slow Extracted Proton Beam”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4010-4012. doi:10.18429/JACoW-IPAC2015-THPF125
[n]	C. Chen, T. J. Barton, D. M. Field, and K. M. Lang, “Simulation Studies of Adiabatic Thermal Beams in a Periodic Solenoidal Focusing Field”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR032, pp. 3003-3005. 
[n]	N. V. Mokhov, Y. I. Alexahin, V. V. Kashikhin, S. I. Striganov, I. S. Tropin, and A. V. Zlobin, “Mitigating Radiation Impact on Superconducting Magnets of the Higgs Factory Muon Collider”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1084-1086. doi:10.18429/JACoW-IPAC2014-TUPRO030
[n]	Q. Luo et al., “New Beam Diagnostics and Related Study on HLS Photo-Injector and HLS II”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3578-3580. doi:10.18429/JACoW-IPAC2014-THPME140
[n]	J. Wang et al., “Research on Low Secondary Electron Yield Materials for Future Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3284-3286. doi:10.18429/JACoW-IPAC2016-THPMB026
[n]	J. Wang et al., “Optimization Design of Ti Cathode in Ceramic Pipe Film Coating Based on the Simulation Result of CST”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2973-2975. doi:10.18429/JACoW-IPAC2015-WEPMN022
[n]	C. Bungau et al., “GEANT4 Studies of Magnets Activation in the HEBT Line for the European Spallation Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA038, pp. 3714-3716. 
[n]	W. Schappert and Y. M. Pischalnikov, “Recent Progress at Fermilab Controlling Lorentz Force Detuning and Microphonics in Superconducting Cavities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO058, pp. 2438-2440. 
[n]	J. Wang et al., “The Effect of Magnetic Field on the Secondary Electron Yield in the Ultra-High Vacuum Environment”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3281-3283. doi:10.18429/JACoW-IPAC2016-THPMB025
[n]	R. De Maria, S. D. Fartoukh, A. V. Bogomyagkov, and M. Korostelev, “HLLHCV1.0: HL-LHC Layout and Optics Models for 150 mm Nb3Sn Triplets and Local Crab-cavities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI014, pp. 1358-1360. 
[n]	J. G. Guo, Q. Luo, and Z. R. Zhou, “Design and Calculation Error Analysis of a High Order Mode Cavity Bunch Length Monitor”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 196-198. doi:10.18429/JACoW-IPAC2016-MOPMB046
[n]	J. Y. Zou et al., “Application of Libera Brilliance Single Pass at NSRL Linac BPM System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC115, pp. 1284-1286. 
[n]	R. Appleby, A. Apyan, L. C. Deacon, and E. Gschwendtner, “CLIC Post-Collision Line Luminosity Monitoring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC027, pp. 1057-1059. 
[n]	T. A. Butler, F. G. Garcia, M. R. Kufer, H. Pfeffer, and D. Wolff, “Design of a Marx-Topology Modulator for FNAL Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3306-3308. doi:10.18429/JACoW-IPAC2015-WEPTY020
[n]	R. B. Palmer, R. C. Fernow, and D. V. Neuffer, “Six-dimensional Bunch Merging for Muon Collider Cooling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR011, pp. 1831-1833. 
[n]	F. F. Wu et al., “Preliminary Research of HLS II BLM System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 190-192. doi:10.18429/JACoW-IPAC2016-MOPMB043
[n]	V. Kashikhin, Y. Alexahin, N. V. Mokhov, and A. V. Zlobin, “High-Field Combined-Function Magnets for a 1.51.5 TeV Muon Collider Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD036, pp. 3587-3589. 
[n]	Y. H. Xu et al., “Design and Research of Secondary Electron Emission Test Equipment with Low Electron Energy”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2970-2972. doi:10.18429/JACoW-IPAC2015-WEPMN021
[n]	I. L. Rakhno, N. V. Mokhov, and K. K. Gudima, “Modeling Proton- and Light Ion-Induced Reactions at Low Energies in the MARS15 Code”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4003-4006. doi:10.18429/JACoW-IPAC2015-THPF123
[n]	C. S. Liu, Q. Luo, B. G. Sun, and Z. R. Zhou, “Development of FPGA-based Bunch-by-Bunch Beam Current Monitor”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 193-195. doi:10.18429/JACoW-IPAC2016-MOPMB045
[n]	Y. Y. Xiao, L. M. Gu, P. Lu, B. G. Sun, L. L. Tang, and J. G. Wang, “Photon Beam Position Monitor based on Position-sensitive Detector for HLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC112, pp. 1281-1283. 
[n]	M. S. Jaski et al., “Magnet Designs for the Multi-bend Achromat Lattice at the Advanced Photon Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3260-3263. doi:10.18429/JACoW-IPAC2015-WEPTY003
[n]	J. Y. Zou et al., “Calibration of Beam Position Monitors in the Injector of HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME043, pp. 568-570. 
[n]	X. Y. Liu et al., “Design and Simulation of Button Beam Position Monitor for IR-FEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 187-189. doi:10.18429/JACoW-IPAC2016-MOPMB042
[n]	I. L. Rakhno, A. I. Drozhdin, N. V. Mokhov, V. I. Sidorov, and I. S. Tropin, “Improving the Fermilab Booster Notching Efficiency, Beam Losses and Radiation Levels”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD083, pp. 562-564. 
[n]	C. Chen, R. Pakter, and F. B. Rizzato, “One-Dimensional Adiabatic Child-Langmuir Flow”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS042, pp. 694-696. 
[n]	J. Lu et al., “Preliminary Mechanical Design of Ceramic Pipe Film Coating Equipment at Hefei Light Source II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2988-2990. doi:10.18429/JACoW-IPAC2015-WEPMN028
[n]	Q. Luo, Q. K. Jia, B. G. Sun, and Z. R. Zhou, “Design of Cavity Beam Monitor at HLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC111, pp. 1278-1280. 
[n]	T. N. Khabiboulline et al., “High Gradient Tests of the Fermilab SSR1 Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC052, pp. 2330-2332. 
[n]	C. Bungau, A. Bungau, R. Cywinski, and T. R. Edgecock, “Power Upgrade Studies for the ISIS-TS1 Spallation Target”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3961-3963. doi:10.18429/JACoW-IPAC2014-THPRI082
[n]	Y. Wang et al., “Vacuum System of the Storage Ring of HLS-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2976-2977. doi:10.18429/JACoW-IPAC2015-WEPMN023
[n]	X. Sun, T. G. Berenc, G. Decker, G. J. Waldschmidt, and G. Wu, “Use of Waveguide and Beam Pipe Probes as Beam Position and Tilt Monitoring Diagnostics with Superconducting Deflecting Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR069, pp. 945-947. 
[n]	M. Korostelev, R. De Maria, S. D. Fartoukh, and A. Wolski, “Optics Transition between Injection and Collision Optics for the HL-LHC Upgrade Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI051, pp. 1460-1462. 
[n]	Q. Luo, N. Chen, G. Feng, and N. Hu, “MAGNET SUBSYSTEM OF HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME013, pp. 3537-3539. 
[n]	R. M. Zwaska, S. C. Childress, A. I. Drozhdin, N. V. Mokhov, and I. S. Tropin, “Beam Loss Protection for a 2.3 Megawatt LBNE Proton Beam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD041, pp. 454-456. 
[n]	D. Jeon et al., “Design of the RISP Vacuum Systems”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3657-3659. doi:10.18429/JACoW-IPAC2016-THPMY003
[n]	J. H. Wei et al., “Design of the Beam Diagnostics System for a New IR-FEL Facility at NSRL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 181-183. doi:10.18429/JACoW-IPAC2016-MOPMB040
[n]	A. Jensen et al., “A Reduced Gradient Output Design for SLAC's XL4 X-Band Klystron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC143, pp. 412-414. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search