Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Vetter et al., “NSLS-II RF Beam Position Monitor Update”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper WECP02, pp. 238-241.
[n] F. Cioeta et al., “Spot Size Measurements in the ELI-NP Compton Gamma Source”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 532-535. doi:10.18429/JACoW-IBIC2016-TUPG74
[n] R. Worsham, D. Dohan, G. Dutto, K. Fong, V. Pacak, and G. Stanford, “Improvements in the Stability of the TRIUMF RF Resonator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1839-1842.
[n] A. Warner et al., “Machine Protection System Research and Development for the Fermilab PIP-II Proton Linac”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1643-1645. doi:10.18429/JACoW-ICALEPCS2017-THPHA110
[n] H. Saugnac et al., “Spoke Cryomodule Prototyping for the MINERVA Project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 315-319. doi:10.18429/JACoW-SRF2019-MOP098
[n] L. Hechler, K. Herlo, P. Kainberger, U. Krause, S. Matthies, and K. H?Âppner, “Extended Application Fields for the Renovated GSI Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA34, pp. 386-388.
[n] D. C. Plostinar and M. A. Clarke-Gayther, “Re-bunching RF Cavities and Hybrid Quadrupoles for the RAL Front-end Test Stand (FETS)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH113, pp. 306-308.
[n] M. Okamura et al., “Beam Commissioning of the RFQ for the RHIC-EBIS Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP046, pp. 4872-4874.
[n] V. I. Shvedunov et al., “Design of a Linear Accelerator with a Magnetic Mirror on the Beam Energy of 45 MeV”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB40, pp. 251-253.
[n] F. Curbis et al., “Status of the Soft X-Ray Laser (SXL) Project at MAX IV Laboratory”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 749-752. doi:10.18429/JACoW-FEL2019-THP084
[n] D. J. S. Findlay et al., “ISIS Upgrades A Status Report”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUZAPA02, pp. 935-939.
[n] B. Corker, M. T. Heron, B. G. Martlew, and W. R. Rawlinson, “A New Control System for Beamline 5D on the SRS at Daresbury”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP41C, pp. 1667-1669.
[n] R. Homs-Puron et al., “Internet of Things (IoT): Wireless Diagnostics Solutions”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1975-1977. doi:10.18429/JACoW-ICALEPCS2017-THSH203
[n] V. Yu. Zaslavsky et al., “Development of Powerful Long-Pulse Terahertz Band FELs Based on Linear Induction Accelerators”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 91-93. doi:10.18429/JACoW-FEL2019-TUP021
[n] N. Kuklev, J. D. Jarvis, Y. K. Kim, A. L. Romanov, J. K. Santucci, and G. Stancari, “Synchrotron Radiation Beam Diagnostics at IOTA - Commissioning Performance and Upgrade Efforts”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2732-2735. doi:10.18429/JACoW-IPAC2019-WEPGW103
[n] M. H. Bickley and K. S. White, “Control System Design Philosophy for Effective Operations and Maintenance”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUDT003, pp. XX-XX.
[n] K. M. Hock and A. Wolski, “Effect of Fill Patterns on Extraction Jitter in Damping Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP051, pp. 664-666.
[n] K. P. Wootton et al., “Vertical Emittance Measurements using a Vertical Undulator”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOCB04, pp. 20-23.
[n] V. Shiltsev, J. Marriner, and V. Danilov, “Beam Instabilities in Very Large Hadron Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRBR5, pp. 641-645.
[n] B. Tampigny et al., “Thermal Stability of the New ESRF Extremely Brilliant Source”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 262-266. doi:10.18429/JACoW-MEDSI2016-WEAA03
[n] R. D. Porter, F. Furuta, D. L. Hall, M. Liepe, and J. T. Maniscalco, “Effectiveness of Chemical Treatments for Reducing the Surface Roughness of Nb3Sn”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1145-1148. doi:10.18429/JACoW-IPAC2017-MOPVA124
[n] F.-X. Nuiry et al., “Design and Prototyping of New CERN Collimators in the Framework of the LHC Injector Upgrade (LIU) Project and the High-Luminosity (HL-LHC) Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 80-83. doi:10.18429/JACoW-IPAC2017-MOPAB006
[n] M. S. Rosenthal et al., “Commissioning Results of the Tertiary Beam Lines for the CERN Neutrino Platform Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3738-3741. doi:10.18429/JACoW-IPAC2019-THPGW064
[n] W. Wu et al., “Multipole Magnets for the HIAF Fragment Separator Using the Canted-Cosine-Theta (CCT) Geometry”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 170-174. doi:10.18429/JACoW-HIAT2018-THOBA01
[n] H. Nishimura, D. Robin, F. Sannibale, and W. Wan, “Lattice Studies for CIRCE (Coherent InfraRed CEnter) at the ALS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT147, pp. 2182-2184.
[n] R. Hutson, “Theoretical Study of H- Stripping with a Wiggler Magnet”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 955-958.
[n] C. Boccard et al., “Tune Measurements in the SPS as Multicycling Machine”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP020L, pp. 1600-1602.
[n] N. Simos et al., “Studies of Material Properties under Irradiation at BNL Linear Isotope Producer (BLIP)”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B03, pp. 457-462.
[n] S. Barbanotti et al., “Connection of EU-XFEL Cryomodules, Caps, Boxes in EU-XFEL Main Linac and Injector: Welding of Cryo-Pipes and Assembly of Beam-Line Absorbers Under Requirements of PED Regulation”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB108, pp. 883-887.
[n] K. Cummings, R. Cordova, D. Rees, W. Roybal, S. Risbud, and D. Wilcox, “Results and Lessons Learned from Conditioning 1 MW CW 350 MHz Coaxial Vacuum Windows”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4073, pp. 938-940.
[n] M. Kondoh et al., “RF Acceleration in KEK Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1533-1536.
[n] P. Sch?â et al., “Towards Near-Field Electro-Optical Bunch Profile Monitoring in a Multi-Bunch Environment”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 227-230. doi:10.18429/JACoW-IPAC2017-MOPAB055
[n] M. S. Beck et al., “Studies of Horizontal Instabilities in the CERN SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3032-3035. doi:10.18429/JACoW-IPAC2018-THPAF034
[n] M. Liepe et al., “First Test Results from the Cornell ERL Injector Cryomodule”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP138, pp. 883-885.
[n] D. T. Touchard et al., “Status of the future SPIRAL2 Control System”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL006, pp. 38-40.
[n] A. Wolski and M. Venturini, “Dynamical Map for Combined Function Magnets with Solenoid, Dipole and Quadrupole Fields”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT148, pp. 2185-2187.
[n] B. Veglia et al., “Electron Cooling Simulation Benchmarking”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 89-92. doi:10.18429/JACoW-COOL2019-TUPS06
[n] M. Sullivan, M. E. Biagini, J. T. Seeman, U. Wienands, and M. Placidi, “The PEP-N Interaction Region”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH139, pp. 3567-3569.
[n] A. Stecchi et al., “A Universal System Based on WebSocket and JSON for the Employment of LabVIEW External Drivers”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 47-50. doi:10.18429/JACoW-PCaPAC2018-WEP08
[n] M. B et al., “Overview of the LHC Dynamic Aperture Studies”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7B006, pp. 1356-1358.
[n] P. Krejcik, “Transverse Profiling of an Intense FEL X-Ray Beam Using a Probe Electron Beam”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 263-265. doi:10.18429/JACoW-IBIC2015-TUALA02
[n] L. G. Cardoso, C. Gaspar, C. Haen, N. Neufeld, F. Varela, and D. Galli, “LHCb Online Infrastructure Monitoring Tools”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEBHAUST01, pp. 618-621.
[n] D. Teytelman and F.-J. Decker, “Injection Diagnostics Using Triggered Bunch-by-Bunch Data Acquisition”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC07, pp. 322-324.
[n] S. T. Battisson, N. R. Lobanov, J. F. Smith, D. Tsifakis, and T. B. Tunningley, “Development of Cryogenic Suspension in the ANU 8t Superconducting Solenoid With Iron Yoke”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4103-4105. doi:10.18429/JACoW-IPAC2019-THPTS001
[n] R. Connolly et al., “Laser Profile Measurements of an H- Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH034, pp. 1300-1302.
[n] R. D?Âlling, “Progress of the Diagnostics at the Proscan Beam Lines”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC23, pp. 361-363.
[n] A. H. Lumpkin, W. J. Berg, and B. X. Yang, “Planned Optical Diagnostics for the APS Low-Energy Undulator Test Line”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V019, pp. 871-873.
[n] M. J. Barnes, F. Caspers, T. Kroyer, E. M?®tral, F. Roncarolo, and B. Salvant, “Measurement of Longitudinal and Transverse Impedance of Kicker Magnets Using the Coaxial Wire Method”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP076, pp. 1726-1728.
[n] N. Tani et al., “Design of a Dipole Magnet for the 3-GeV Proton Synchrotron of the JAERI/KEK Joint Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO028, pp. 2376-2378.
[n] O. S. Shubina, A. I. Senchenko, and P. Yu. Shatunov, “Development of Software for Accessing the Vepp-2000 Collider Facility Archiving System”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 102-104. doi:10.18429/JACoW-PCaPAC2018-WEP28
[n] C. Cyterski and E. P. Chin, “Personnel Protection System Upgrade for the LCLS Electron Beam Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 157-159. doi:10.18429/JACoW-ICALEPCS2015-MOPGF029
[n] A. R. D. Rodrigues, R. H. A. Farias, M. J. Ferreira, F. S. Rafael, and G. Tosin, “Pulsed Septa for the LNLS Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P041, pp. 3324-3326.
[n] M. Sosin, T. Blaszczyk, A. Herty, J. Jaros, and H. Mainaud Durand, “Design and Study of a 6 Degree-Of-Freedom Universal Adjustment Platform for HL-LHC Components”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3720-3722. doi:10.18429/JACoW-IPAC2019-THPGW058
[n] E. Kako et al., “High Power RF Tests on Input Couplers for 972MHz Superconducting Cavities in the J-PARC Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB062, pp. 1338-1340.
[n] S. M. Meykopff and B. Beutner, “Emittance Measurement and Optics Matching at the European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1655-1657. doi:10.18429/JACoW-ICALEPCS2017-THPHA116
[n] Z. G. He and Q. K. Jia, “Spatial and Temporal Shaping of Picoseconds Drive Laser in Photocathode RF Gun”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP200, pp. 1196-1198.
[n] S. Hirlaender et al., “Energy Dependence of the Reproducibility and Injection Efficiency of the LINAC3-LEIR Complex”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3188-3191. doi:10.18429/JACoW-IPAC2019-WEPTS040
[n] P. Baxevanis and G. Stupakov, “Tolerances on Energy Deviation in Microbunched Electron Cooling”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 837-840. doi:10.18429/JACoW-NAPAC2019-WEPLH16
[n] H. Okamoto, D. Moehl, and A. Sessler, “Three-dimensional Laser Cooling”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1205-1208.
[n] C. M. Scoby, R. K. Li, J. T. Moody, and P. Musumeci, “Femtosecond RF Timing in Low Charge Photoinjectors”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP287, pp. 654-656.
[n] P. A. Schmelzbach, “Experience with high-power operation of the PSI proton accelerator facility”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAZ01, pp. 274-278.
[n] Y. Song, X. Chen, C. Li, G. Liu, J. G. Wang, and K. Xuan, “Data Archiving and Visualization of IRFEL”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 41-43. doi:10.18429/JACoW-PCaPAC2018-WEP06
[n] T. Hattori, T. Fukushima, H. Muto, H. Suzuki, and N. Ueda, “Development of a New IHQ Linac (Construction and Acceleration of a 2 MeV Prototype Linac)”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 944-947.
[n] J. C. Dooling, F. R. Brumwell, W. S. Czyz, K. Harkay, M. K. Lien, and G. E. McMichael, “Observations of Electrons in the Intense Pulse Neutron Source (IPNS) Rapid Cycling Synchrotron (RCS)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPA007, pp. 592-594.
[n] J. Byrd, A. Loftsdottir, M. C. Martin, F. Sannibale, and M. Venturini, “A Model for Producing Stable, Broadband Terahertz Coherent Synchrotron Radiation in Storage Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB016, pp. 863-865.
[n] P. Wang, H. B. Chen, C. Cheng, J. Shi, X. W. Wu, and H. Zha, “Development of a S-Band Pulse Compressor”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4227-4229. doi:10.18429/JACoW-IPAC2017-THPIK058
[n] F. S. Rafael and E.K.C.S. Hayashi, “Beam Position Monitor for the LNLS UVX Synchrotron Light Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ33, pp. 2527-2529.
[n] A. H. Lumpkin, W. J. Berg, B. X. Yang, and M. White, “Time-Resolved Imaging for the APS Linac Beams”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4059, pp. 529-531.
[n] S. S. Chang, J. Y. Huang, M. Kwon, M. K. Park, and M. Yoon, “Tune Measurement and Beam Damping System for PLS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP080L, pp. 1914-1916.
[n] T. Powers and C. Tennant, “Implications of Incomplete Energy Recovery in SRF-Based Energy Recovery Linacs”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 36, pp. 75-79.
[n] S. G. Biedron and S. V. Milton, “Automated Tuning of the Advanced Photon Source Booster Synchrotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W001, pp. 324-326.
[n] F. Zimmermann et al., “Experiments on LHC Long-Range Beam-Beam Compensation and Crossing Schemes at the CERN SPS in 2004”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPC009, pp. 686-688.
[n] A. Ledeul, A. Savulescu, G. Segura, B. Styczen, and D. Vazquez Rivera, “CERN Supervision, Control and Data Acquisition System for Radiation and Environmental Protection”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 248-252. doi:10.18429/JACoW-PCaPAC2018-FRCC3
For LaTeX
Use Complete Form
For BibTeX
References
- K. Vetter et al., “NSLS-II RF Beam Position Monitor Update”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper WECP02, pp. 238-241.
- F. Cioeta et al., “Spot Size Measurements in the ELI-NP Compton Gamma Source”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 532-535.
- R. Worsham, D. Dohan, G. Dutto, K. Fong, V. Pacak, and G. Stanford, “Improvements in the Stability of the TRIUMF RF Resonator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1839-1842.
- A. Warner et al., “Machine Protection System Research and Development for the Fermilab PIP-II Proton Linac”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1643-1645.
- H. Saugnac et al., “Spoke Cryomodule Prototyping for the MINERVA Project”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 315-319.
- L. Hechler, K. Herlo, P. Kainberger, U. Krause, S. Matthies, and K. H?Âppner, “Extended Application Fields for the Renovated GSI Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA34, pp. 386-388.
- D. C. Plostinar and M. A. Clarke-Gayther, “Re-bunching RF Cavities and Hybrid Quadrupoles for the RAL Front-end Test Stand (FETS)”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH113, pp. 306-308.
- M. Okamura et al., “Beam Commissioning of the RFQ for the RHIC-EBIS Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP046, pp. 4872-4874.
- V. I. Shvedunov et al., “Design of a Linear Accelerator with a Magnetic Mirror on the Beam Energy of 45 MeV”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB40, pp. 251-253.
- F. Curbis et al., “Status of the Soft X-Ray Laser (SXL) Project at MAX IV Laboratory”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 749-752.
- D. J. S. Findlay et al., “ISIS Upgrades A Status Report”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUZAPA02, pp. 935-939.
- B. Corker, M. T. Heron, B. G. Martlew, and W. R. Rawlinson, “A New Control System for Beamline 5D on the SRS at Daresbury”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP41C, pp. 1667-1669.
- R. Homs-Puron et al., “Internet of Things (IoT): Wireless Diagnostics Solutions”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1975-1977.
- V. Yu. Zaslavsky et al., “Development of Powerful Long-Pulse Terahertz Band FELs Based on Linear Induction Accelerators”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 91-93.
- N. Kuklev, J. D. Jarvis, Y. K. Kim, A. L. Romanov, J. K. Santucci, and G. Stancari, “Synchrotron Radiation Beam Diagnostics at IOTA - Commissioning Performance and Upgrade Efforts”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2732-2735.
- M. H. Bickley and K. S. White, “Control System Design Philosophy for Effective Operations and Maintenance”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUDT003, pp. XX-XX.
- K. M. Hock and A. Wolski, “Effect of Fill Patterns on Extraction Jitter in Damping Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP051, pp. 664-666.
- K. P. Wootton et al., “Vertical Emittance Measurements using a Vertical Undulator”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOCB04, pp. 20-23.
- V. Shiltsev, J. Marriner, and V. Danilov, “Beam Instabilities in Very Large Hadron Collider”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRBR5, pp. 641-645.
- B. Tampigny et al., “Thermal Stability of the New ESRF Extremely Brilliant Source”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 262-266.
- R. D. Porter, F. Furuta, D. L. Hall, M. Liepe, and J. T. Maniscalco, “Effectiveness of Chemical Treatments for Reducing the Surface Roughness of Nb3Sn”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1145-1148.
- F.-X. Nuiry et al., “Design and Prototyping of New CERN Collimators in the Framework of the LHC Injector Upgrade (LIU) Project and the High-Luminosity (HL-LHC) Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 80-83.
- M. S. Rosenthal et al., “Commissioning Results of the Tertiary Beam Lines for the CERN Neutrino Platform Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3738-3741.
- W. Wu et al., “Multipole Magnets for the HIAF Fragment Separator Using the Canted-Cosine-Theta (CCT) Geometry”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 170-174.
- H. Nishimura, D. Robin, F. Sannibale, and W. Wan, “Lattice Studies for CIRCE (Coherent InfraRed CEnter) at the ALS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT147, pp. 2182-2184.
- R. Hutson, “Theoretical Study of H- Stripping with a Wiggler Magnet”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 955-958.
- C. Boccard et al., “Tune Measurements in the SPS as Multicycling Machine”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP020L, pp. 1600-1602.
- N. Simos et al., “Studies of Material Properties under Irradiation at BNL Linear Isotope Producer (BLIP)”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B03, pp. 457-462.
- S. Barbanotti et al., “Connection of EU-XFEL Cryomodules, Caps, Boxes in EU-XFEL Main Linac and Injector: Welding of Cryo-Pipes and Assembly of Beam-Line Absorbers Under Requirements of PED Regulation”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB108, pp. 883-887.
- K. Cummings, R. Cordova, D. Rees, W. Roybal, S. Risbud, and D. Wilcox, “Results and Lessons Learned from Conditioning 1 MW CW 350 MHz Coaxial Vacuum Windows”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4073, pp. 938-940.
- M. Kondoh et al., “RF Acceleration in KEK Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1533-1536.
- P. Sch?â et al., “Towards Near-Field Electro-Optical Bunch Profile Monitoring in a Multi-Bunch Environment”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 227-230.
- M. S. Beck et al., “Studies of Horizontal Instabilities in the CERN SPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3032-3035.
- M. Liepe et al., “First Test Results from the Cornell ERL Injector Cryomodule”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP138, pp. 883-885.
- D. T. Touchard et al., “Status of the future SPIRAL2 Control System”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL006, pp. 38-40.
- A. Wolski and M. Venturini, “Dynamical Map for Combined Function Magnets with Solenoid, Dipole and Quadrupole Fields”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT148, pp. 2185-2187.
- B. Veglia et al., “Electron Cooling Simulation Benchmarking”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 89-92.
- M. Sullivan, M. E. Biagini, J. T. Seeman, U. Wienands, and M. Placidi, “The PEP-N Interaction Region”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH139, pp. 3567-3569.
- A. Stecchi et al., “A Universal System Based on WebSocket and JSON for the Employment of LabVIEW External Drivers”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 47-50.
- M. B et al., “Overview of the LHC Dynamic Aperture Studies”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7B006, pp. 1356-1358.
- P. Krejcik, “Transverse Profiling of an Intense FEL X-Ray Beam Using a Probe Electron Beam”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 263-265.
- L. G. Cardoso, C. Gaspar, C. Haen, N. Neufeld, F. Varela, and D. Galli, “LHCb Online Infrastructure Monitoring Tools”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEBHAUST01, pp. 618-621.
- D. Teytelman and F.-J. Decker, “Injection Diagnostics Using Triggered Bunch-by-Bunch Data Acquisition”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC07, pp. 322-324.
- S. T. Battisson, N. R. Lobanov, J. F. Smith, D. Tsifakis, and T. B. Tunningley, “Development of Cryogenic Suspension in the ANU 8t Superconducting Solenoid With Iron Yoke”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4103-4105.
- R. Connolly et al., “Laser Profile Measurements of an H- Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH034, pp. 1300-1302.
- R. D?Âlling, “Progress of the Diagnostics at the Proscan Beam Lines”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC23, pp. 361-363.
- A. H. Lumpkin, W. J. Berg, and B. X. Yang, “Planned Optical Diagnostics for the APS Low-Energy Undulator Test Line”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V019, pp. 871-873.
- M. J. Barnes, F. Caspers, T. Kroyer, E. M?®tral, F. Roncarolo, and B. Salvant, “Measurement of Longitudinal and Transverse Impedance of Kicker Magnets Using the Coaxial Wire Method”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP076, pp. 1726-1728.
- N. Tani et al., “Design of a Dipole Magnet for the 3-GeV Proton Synchrotron of the JAERI/KEK Joint Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO028, pp. 2376-2378.
- O. S. Shubina, A. I. Senchenko, and P. Yu. Shatunov, “Development of Software for Accessing the Vepp-2000 Collider Facility Archiving System”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 102-104.
- C. Cyterski and E. P. Chin, “Personnel Protection System Upgrade for the LCLS Electron Beam Linac”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 157-159.
- A. R. D. Rodrigues, R. H. A. Farias, M. J. Ferreira, F. S. Rafael, and G. Tosin, “Pulsed Septa for the LNLS Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P041, pp. 3324-3326.
- M. Sosin, T. Blaszczyk, A. Herty, J. Jaros, and H. Mainaud Durand, “Design and Study of a 6 Degree-Of-Freedom Universal Adjustment Platform for HL-LHC Components”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3720-3722.
- E. Kako et al., “High Power RF Tests on Input Couplers for 972MHz Superconducting Cavities in the J-PARC Project”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB062, pp. 1338-1340.
- S. M. Meykopff and B. Beutner, “Emittance Measurement and Optics Matching at the European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1655-1657.
- Z. G. He and Q. K. Jia, “Spatial and Temporal Shaping of Picoseconds Drive Laser in Photocathode RF Gun”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP200, pp. 1196-1198.
- S. Hirlaender et al., “Energy Dependence of the Reproducibility and Injection Efficiency of the LINAC3-LEIR Complex”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3188-3191.
- P. Baxevanis and G. Stupakov, “Tolerances on Energy Deviation in Microbunched Electron Cooling”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 837-840.
- H. Okamoto, D. Moehl, and A. Sessler, “Three-dimensional Laser Cooling”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1205-1208.
- C. M. Scoby, R. K. Li, J. T. Moody, and P. Musumeci, “Femtosecond RF Timing in Low Charge Photoinjectors”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP287, pp. 654-656.
- P. A. Schmelzbach, “Experience with high-power operation of the PSI proton accelerator facility”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THAZ01, pp. 274-278.
- Y. Song, X. Chen, C. Li, G. Liu, J. G. Wang, and K. Xuan, “Data Archiving and Visualization of IRFEL”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 41-43.
- T. Hattori, T. Fukushima, H. Muto, H. Suzuki, and N. Ueda, “Development of a New IHQ Linac (Construction and Acceleration of a 2 MeV Prototype Linac)”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 944-947.
- J. C. Dooling, F. R. Brumwell, W. S. Czyz, K. Harkay, M. K. Lien, and G. E. McMichael, “Observations of Electrons in the Intense Pulse Neutron Source (IPNS) Rapid Cycling Synchrotron (RCS)”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPA007, pp. 592-594.
- J. Byrd, A. Loftsdottir, M. C. Martin, F. Sannibale, and M. Venturini, “A Model for Producing Stable, Broadband Terahertz Coherent Synchrotron Radiation in Storage Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB016, pp. 863-865.
- P. Wang, H. B. Chen, C. Cheng, J. Shi, X. W. Wu, and H. Zha, “Development of a S-Band Pulse Compressor”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4227-4229.
- F. S. Rafael and E.K.C.S. Hayashi, “Beam Position Monitor for the LNLS UVX Synchrotron Light Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ33, pp. 2527-2529.
- A. H. Lumpkin, W. J. Berg, B. X. Yang, and M. White, “Time-Resolved Imaging for the APS Linac Beams”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4059, pp. 529-531.
- S. S. Chang, J. Y. Huang, M. Kwon, M. K. Park, and M. Yoon, “Tune Measurement and Beam Damping System for PLS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP080L, pp. 1914-1916.
- T. Powers and C. Tennant, “Implications of Incomplete Energy Recovery in SRF-Based Energy Recovery Linacs”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 36, pp. 75-79.
- S. G. Biedron and S. V. Milton, “Automated Tuning of the Advanced Photon Source Booster Synchrotron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W001, pp. 324-326.
- F. Zimmermann et al., “Experiments on LHC Long-Range Beam-Beam Compensation and Crossing Schemes at the CERN SPS in 2004”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPC009, pp. 686-688.
- A. Ledeul, A. Savulescu, G. Segura, B. Styczen, and D. Vazquez Rivera, “CERN Supervision, Control and Data Acquisition System for Radiation and Environmental Protection”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 248-252.
Back to search