Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Montag, L. Ahrens, and P. Thieberger, “Tomographic Measurement of Longitudinal Emittance Growth Due to Stripping Foils”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT027, pp. 2000-2002.
[n] D. A. Liakin, P. Forck, K. Lang, and R. Singh, “Advanced Digital Signal Processing for Effective Beam Position Monitoring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD16, pp. 74-76.
[n] V. Gubin, A. M. Barnyakov, S. L. Samoylov, and D. P. Sukhanov, “RF Cavity Based Charge Detector for a Low Charge Ultra Sort Singe Electron Bunch Measurement”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 423-425. doi:10.18429/JACoW-RuPAC2021-WEPSC42
[n] J. Guo, D. W. Martin, S. G. Tantawi, and C. Yoneda, “Cryogenic RF Material Testing at SLAC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP102, pp. 1030-1032.
[n] J. Knaster, P. Cara, A. Mosnier, S. Chel, J. Molla, and H. Suzuki, “Installation and Commissioning of the 1.1 MW Deuteron Prototype Linac for IFMIF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOAB101, pp. 1090-1092.
[n] S. Khan and T. Knuth, “BESSY II Feedback Systems”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA32, pp. 1144-1146.
[n] M. Libkind, L. Bertolini, P. Duffy, R. Carr, G. Rakowsky, and J. Skaritka, “Mechanical Design of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP93, pp. 2477-2479.
[n] W. Corbett et al., “SPEAR 3 Upgrade Project: A Status Report”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH091, pp. 2674-2676.
[n] X. Cui, Y. Zhao, and Y. Jiao, “Feasibility study of fast beam-based alignment using ac excitations in the HEPS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 398-399. doi:10.18429/JACoW-IPAC2023-MOPA146
[n] S. Heifets et al., “Impedance Study for the PEP-II B-factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC01, pp. 2317-2318.
[n] D. Sun, P. Young, A. Moretti, and J. Dey, “Design and Operation of PET Radio Frequency Quadrupoles”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P044, pp. 3018-3020.
[n] F. Stephan et al., “Recent Results and Perspectives of the Low Emittance Photo Injector at PITZ”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THBOC02, pp. XX-XX.
[n] I. Rutkowski, K. Czuba, and M. G. Grzegrzolka, “LO Board for 704.42 MHz Cavity Simulator for ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1573-1576. doi:10.18429/JACoW-ICALEPCS2017-THPHA081
[n] M. E. Nordby, N. Kurita, and C.-K. Ng, “Bellows Design for the PEP-II High Energy Ring Arc Chambers”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP07, pp. 2048-2050.
[n] A. V. Zlobin, J. R. Carmichael, V. V. Kashikhin, and I. Novitski, “Conceptual Design of a 17 T Nb3Sn Accelerator Dipole Magnet”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2742-2744. doi:10.18429/JACoW-IPAC2018-WEPML027
[n] V. R. Arsov, M. M. Dehler, S. Hunziker, M. G. Kaiser, and V. Schlott, “First Results from the Bunch Arrival-Time Monitor at the SwissFEL Test Injector”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOAL4, pp. 8-11.
[n] D. Z. Chen et al., “Progress of the RF Negative Ion Source Research at HUST”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 430-432. doi:10.18429/JACoW-IPAC2014-MOPME024
[n] H. Leboutet, J. Aucouturier, and J. C. Schnuriger, “I. Use of the Hodoscope to Measure the Axial Frequency of Betatron Oscillations; II. The Accelerating System of the Grenoble Isochronous Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F04, pp. XX-XX.
[n] M. M. Dehler, S. Hunziker, and M. Leich, “Front End Concept for a Wake Field Monitor”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD10, pp. 660-664.
[n] N. Baboi, G. B. Bowden, V. A. Dolgashev, R. M. Jones, S. G. Tantawi, and J. W. Wang, “Coaxial Wire Measurements in NLC Accelerating Structures”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI119, pp. 1440-1442.
[n] J. Knaster, Y. Okumura, P. Cara, A. Kasughai, and M. Sugimoto, “Challenges of the High Current Prototype Accelerator of IFMIF/EVEDA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 52-57. doi:10.18429/JACoW-IPAC2016-MOZB02
For LaTeX
Use Complete Form
For BibTeX
References
- C. Montag, L. Ahrens, and P. Thieberger, “Tomographic Measurement of Longitudinal Emittance Growth Due to Stripping Foils”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT027, pp. 2000-2002.
- D. A. Liakin, P. Forck, K. Lang, and R. Singh, “Advanced Digital Signal Processing for Effective Beam Position Monitoring”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD16, pp. 74-76.
- V. Gubin, A. M. Barnyakov, S. L. Samoylov, and D. P. Sukhanov, “RF Cavity Based Charge Detector for a Low Charge Ultra Sort Singe Electron Bunch Measurement”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 423-425.
- J. Guo, D. W. Martin, S. G. Tantawi, and C. Yoneda, “Cryogenic RF Material Testing at SLAC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP102, pp. 1030-1032.
- J. Knaster, P. Cara, A. Mosnier, S. Chel, J. Molla, and H. Suzuki, “Installation and Commissioning of the 1.1 MW Deuteron Prototype Linac for IFMIF”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUOAB101, pp. 1090-1092.
- S. Khan and T. Knuth, “BESSY II Feedback Systems”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA32, pp. 1144-1146.
- M. Libkind, L. Bertolini, P. Duffy, R. Carr, G. Rakowsky, and J. Skaritka, “Mechanical Design of the VISA Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP93, pp. 2477-2479.
- W. Corbett et al., “SPEAR 3 Upgrade Project: A Status Report”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH091, pp. 2674-2676.
- X. Cui, Y. Zhao, and Y. Jiao, “Feasibility study of fast beam-based alignment using ac excitations in the HEPS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA146, pp. 398-399.
- S. Heifets et al., “Impedance Study for the PEP-II B-factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC01, pp. 2317-2318.
- D. Sun, P. Young, A. Moretti, and J. Dey, “Design and Operation of PET Radio Frequency Quadrupoles”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P044, pp. 3018-3020.
- F. Stephan et al., “Recent Results and Perspectives of the Low Emittance Photo Injector at PITZ”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THBOC02, pp. XX-XX.
- I. Rutkowski, K. Czuba, and M. G. Grzegrzolka, “LO Board for 704.42 MHz Cavity Simulator for ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1573-1576.
- M. E. Nordby, N. Kurita, and C.-K. Ng, “Bellows Design for the PEP-II High Energy Ring Arc Chambers”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP07, pp. 2048-2050.
- A. V. Zlobin, J. R. Carmichael, V. V. Kashikhin, and I. Novitski, “Conceptual Design of a 17 T Nb3Sn Accelerator Dipole Magnet”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2742-2744.
- V. R. Arsov, M. M. Dehler, S. Hunziker, M. G. Kaiser, and V. Schlott, “First Results from the Bunch Arrival-Time Monitor at the SwissFEL Test Injector”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOAL4, pp. 8-11.
- D. Z. Chen et al., “Progress of the RF Negative Ion Source Research at HUST”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 430-432.
- H. Leboutet, J. Aucouturier, and J. C. Schnuriger, “I. Use of the Hodoscope to Measure the Axial Frequency of Betatron Oscillations; II. The Accelerating System of the Grenoble Isochronous Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63F04, pp. XX-XX.
- M. M. Dehler, S. Hunziker, and M. Leich, “Front End Concept for a Wake Field Monitor”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPD10, pp. 660-664.
- N. Baboi, G. B. Bowden, V. A. Dolgashev, R. M. Jones, S. G. Tantawi, and J. W. Wang, “Coaxial Wire Measurements in NLC Accelerating Structures”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI119, pp. 1440-1442.
- J. Knaster, Y. Okumura, P. Cara, A. Kasughai, and M. Sugimoto, “Challenges of the High Current Prototype Accelerator of IFMIF/EVEDA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 52-57.
Back to search