Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Quaranta, R. Bruce, and S. Redaelli, “SixTrack Simulation of Off-momentum Cleaning in LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO037, pp. 972-974.
[n] E. Donoghue et al., “Studies of Electron Activities in SNS-Type Superconducting RF Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP67, pp. 402-405.
[n] T. Inagaki et al., “Construction Status of C-band Main Accelerator for XFEL/SPring-8”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA009, pp. 3691-3693.
[n] P. B. Wilson et al., “Bunch Lengthening and Related Effects in SPEAR II”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1211-1215.
[n] F. Y. Wang, C. Adolphsen, J. P. Eichner, C. D. Nantista, and L. Xiao, “Experimental Study of Surface RF Magnetic Field Enhancement Caused by Closely Spaced Protrusions”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3949-3951. doi:10.18429/JACoW-IPAC2014-THPRI078
[n] K. Sennyu, H. Hara, M. Matsuoka, and T. Yanagisawa, “Status of the Superconducting Cavity Development for ILC at MHI”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD009, pp. 463-465.
[n] S. J. Park et al., “Beam Diagnostic System for High Intensity Proton Linac at KAERI”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB059, pp. 2539-2541.
[n] K. Enami et al., “Performance Evaluation of ERL Main Linac Tuner”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2534-2536. doi:10.18429/JACoW-IPAC2014-WEPRI027
[n] D. Hagedorn, F. Rodriguez-Mateos, and R. Schmidt, “Protection of LHC Superconducting Corrector Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP025G, pp. 2255-2257.
[n] S. Jin et al., “Magnetic Shielding for the 1.3 GHz Cryomodule at IHEP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME010, pp. 3528-3530.
[n] P. Asboe-Hansen et al., “Acceleration and Stacking of Deuterons in the CERN PS and ISR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1557-1561.
[n] S. Z. Li et al., “Results from Plasma Wakefield Acceleration Experiments at FACET”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ023, pp. 2814-2816.
[n] S. Artikova, K. Ikegami, T. Shibata, and Y. Kondo, “Beam Dynamics Studies on Low and Medium Energy Beam Transport With Intense H- Ions for J-PARC Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4439-4441. doi:10.18429/JACoW-IPAC2017-THPVA011
[n] Y. Wang et al., “Dynamic Aperture Study of the CEPC Main Ring with Interaction Region”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3795-3797. doi:10.18429/JACoW-IPAC2016-THPOR012
[n] J. M. Vogt, J. Knobloch, and O. Kugeler, “High Q0 Research: The Dynamics of Flux Trapping in Superconducting Niobium”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUIOA02, pp. 374-377.
[n] F. Carra et al., “Mechanical Engineering and Design of Novel Collimators for HL-LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 369-372. doi:10.18429/JACoW-IPAC2014-MOPRO116
[n] J. M. Koch, F. Epaud, E. Plouviez, and K. B. Scheidt, “Fast Orbit Correction for the ESRF Storage Ring”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS010, pp. 177-179.
[n] A. Takagi et al., “An Irradiation System for Carbon Stripper Foils with 750 keV H- Beams”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS028, pp. 1550-1552.
[n] N. Sakamoto et al., “5 year operation of RIKEN super-conducting linac”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 1-7. doi:10.18429/JACoW-SRF2025-MOA01
[n] R. De Maria, C. Boccard, W. H?Âfle, G. Kotzian, C. Palau Montava, and B. Salvant, “Analysis of the Performance of the SPS Exponential Coupler Striplines using Beam Measurements and Simulation Data”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB054, pp. 2812-2814.
[n] R. De Maria, M. Giovannozzi, T. Persson, R. Tomas, and Y. Wei, “Analysis of Intensity-dependent Effects on LHC Transverse Tunes at Injection Energy”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2108-2111. doi:10.18429/JACoW-IPAC2015-TUPTY043
[n] J. Gao, “The Precise Measurement of Electric and Magnetic Fields in a Resonant Cavity”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO470, pp. 247-249.
[n] S. Liu, P. Bambade, S. Bai, T. Tauchi, and N. Terunuma, “Development of Diamond Sensors for Beam Halo and Compton Spectrum Diagnostics After The Interaction Point of ATF2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME003, pp. 470-472.
[n] K. Noda et al., “Beam Transport System for the HIMAC”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XD-07, pp. 625-628.
[n] H. Podlech et al., “A Superconducting CH-Linac for IFMIF”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP080, pp. 3548-3550.
[n] A. Uchiyama, M. Komiyama, K. Yamada, and N. Fukunishi, “Implementation and initial deployment of embedded EPICS for MELSEC iQ-R in the SRILAC LLRF system”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 482-486. doi:10.18429/JACoW-SRF2025-TUP67
[n] M. Rescic and L. Fernandez, “ESS Integrated Control System and the Agile Methodology”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC084, pp. 296-298.
[n] K. Mizushima et al., “Beam Spot Measurement using a Phosphor Screen for Carbon-Ion Therapy at NIRS”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB78, pp. 256-258.
[n] M.-H. Chun et al., “Operation Status of RF System for the PLS-II Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA048, pp. 187-189.
[n] Y.-M. Shin, A. H. Lumpkin, V. D. Shiltsev, and R. M. Thurman-Keup, “Feasibility of Continuously Focused TeV/m Channeling Acceleration with CNT-Channel”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2670-2673. doi:10.18429/JACoW-IPAC2015-WEPWA072
[n] N. Liu et al., “Performance Evaluation of the RF Reference Phase Stabilization System on Fiber-optical Link for KEK e-/e+ Injector LINAC”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 230-232. doi:10.18429/JACoW-LINAC2018-MOPO107
[n] S. Mey et al., “Verifying the Single Bunch Capability of the New Injector at ELSA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC033, pp. 1072-1074.
[n] H. Bluem, R. A. Rimmer, T. Schultheiss, and L. M. Young, “Normal Conducting CW RF Gun Design for High Performance Electron Beams”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC067, pp. 223-225.
[n] J. Li, B. Du, Q. K. Jia, and H. T. Li, “Calculation and Analysis of the Magnetic Field of a Transverse Gradient Undulator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1130-1132. doi:10.18429/JACoW-IPAC2016-TUPMB011
[n] G. Trahern, “Status of the ESS Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRCAUST03, pp. 1345-1348.
[n] O. Kugeler, W. Anders, J. Knobloch, and A. Neumann, “Microphonics Measurements in a CW-driven TESLA-type Cavity”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH149, pp. 405-407.
[n] F. Epaud, J. M. Koch, and E. Plouviez, “Architecture and Control of the Fast Orbit Correction for the ESRF Storage Ring”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS014, pp. 189-191.
[n] B. Du, G. Huang, L. Lin, Y. T. Liu, and Z. Zhao, “Quadrature Directional Coupling Method for Precise RF Power Measurement”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 549-551. doi:10.18429/JACoW-IPAC2016-MOPMY016
[n] J. Lee and R. Cary, “Calculation of Finite-Length, Hollow-Beam Equilibria”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA80, pp. 2784-2786.
[n] X. He, Q. Li, C. Ma, J. Pang, and L. Zhao, “Preliminary Experimental Results of Axial B-dot Measuring Beam Tilt”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME046, pp. 577-579.
[n] P. Piot, G. A. Krafft, K. Jordan, A. Grippo, and J. Song, “Performance of the Electron Beam Diagnostics at Jefferson Lab's High Power Free Electron Laser”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA156, pp. 2229-2231.
[n] Y. Luo, P. Cameron, A. Della Penna, T. Satogata, and D. Trbojevic, “RHIC Beam-Based Sextupole Polarity Verification”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS098, pp. 1868-1870.
[n] I. Kohno et al., “RIKEN 160cm Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-04, pp. 46-49.
[n] Y. Wei, C. P. Welsch, G. X. Xia, K. Hanahoe, O. Mete, and J. Smith, “Investigations into Dielectric Laser-Driven Accelerators using the CST and VSIM Simulation Codes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2618-2620. doi:10.18429/JACoW-IPAC2015-WEPWA051
[n] C. Barue et al., “Status Report on Metallic Beam Production at GANIL/SPIRAL 2”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 92-97. doi:10.18429/JACoW-ECRIS2016-WEPP05
[n] J. Tan, G. Bellodi, A. Feschenko, and S. A. Gavrilov, “Results from the CERN LINAC4 Longitudinal Bunch Shape Monitor”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 415-419. doi:10.18429/JACoW-IBIC2018-WEPA19
[n] J. Niedziela, W. Fu, M. Harvey, G. J. Marr, T. Satogata, and V. Schoefer, “Dynamic Collaborative Documentation at the Brookhaven National Laboratory Collider-Acclerator Department”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS098, pp. 658-660.
[n] W. Liu, B. Du, G. Huang, L. Lin, L. Shang, and W. B. Song, “Development of 1.3 GHz Cavity Combiner for 24 kW CW SSA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4020-4022. doi:10.18429/JACoW-IPAC2017-THPAB127
[n] O. Payir et al., “Massless Beam Separation System for Intense Ion Beams”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3736-3738. doi:10.18429/JACoW-IPAC2015-THPF023
[n] M. S. Stefani et al., “Magnetized Gridded Thermionic Electron Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2140-2143. doi:10.18429/JACoW-IPAC2019-TUPTS093
[n] V. S. Pronskikh et al., “Target Station Design for the Mu2e Experiment”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3970-3972. doi:10.18429/JACoW-IPAC2014-THPRI085
[n] D. J. Harding et al., “Design and Fabrication of a Multi-element Corrector Magnet for the Fermilab Booster Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS006, pp. 452-454.
[n] I. V. Khodak, M. I. Ayzatsky, V. A. Kushnir, V. V. Mitrochenko, and V. F. Zhiglo, “Current Nanopulse Generation in RF Electron Gun with Metal-Dielectric Cathode”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB025, pp. 2098-2100.
[n] C.-Y. Liu, C. H. Kuo, and K.-B. Liu, “Design and Implementation of a Switching Mode Bipolar Power Stage of the Correction Power Supply”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF055, pp. 1729-1731.
[n] M. Komiyama, N. Fukunishi, A. Uchiyama, M. Hamanaka, and T. Nakamura, “Recent Improvements to the RIKEN RI Beam Factory Control System”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 31-34. doi:10.18429/JACoW-PCAPAC2016-WEPOPRPO11
[n] A. Bertarelli et al., “Novel Materials for Collimators at LHC and its Upgrades”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO4AB03, pp. 438-442.
[n] T. Ohshima, H. Ego, N. Hosoda, H. Maesaka, T. Fukui, and M. Ishii, “Development of a New LLRF System Based on MicroTCA.4 for the SPring-8 Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3996-3999. doi:10.18429/JACoW-IPAC2017-THPAB117
[n] D. Einfeld, “ALBA Synchrotron Light Source Commissioning”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOXAA01, pp. 1-5.
[n] P. Cameron et al., “Progress in Tune, Coupling, and Chromaticity Measurement and Feedback during RHIC Run 7”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOCC02, pp. 886-888.
[n] T. Nakagawa et al., “Production of Intense Beams of Highly Charged Heavy Ions from RIKEN 18 GHz ECRIS and Liquid He Free SC-ECRIS”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper G-4, pp. XX-XX.
[n] D. A. Chermoshentsev, S. A. Gavrilov, and A. Feschenko, “Influence of Mechanical Vibrations on the Phase Resolution of Bunch Shape Monitor”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 477-479. doi:10.18429/JACoW-RUPAC2018-THPSC35
[n] J. Reich, S. Martin, and C. Mayer-Boericke, “Ray Tracing Calculations According to Field Mapping for the Julich Double Monochromator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 835-837.
[n] D. Einfeld, “Status of the ALBA Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN066, pp. 1073-1075.
[n] R. L. Bennett, “Ion Source Control through High Voltage Isolation Distances Utilizing photon-Coupled Solid State Devices”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 901-903.
[n] C. C. Paulson and R. A. Hartley, “Effect of Tank Sequencing on CCL Accelerators”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU409, pp. 321-325.
[n] J. Pang, S. Chen, X. He, S. Pei, H. Shi, and J. R. Zhang, “Primary Design of 4 a S-band Linac using Slotted Iris Structure for Hom Damping”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 76-78. doi:10.18429/JACoW-SAP2017-MOPH22
[n] R. Fullwood, E. R. Gaerttner, and R. Krasse, “Qualitative Effects of Radiation Damage on Equipment and Components at the R. P. I. Linac”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 705-708.
[n] D. Jeon et al., “Progress of the RAON”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 36-38. doi:10.18429/JACoW-SRF2017-MOYA03
[n] T. Sakai et al., “RF Characteristics of 20K Cryogenic 2.6-cell Photocathode RF-gun Test Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP106, pp. 671-673.
[n] G. Franchetti, S. S. Gilardoni, A. Huschauer, F. Schmidt, and R. Wasef, “Studies and Observations of Beam Dynamics Near a Sum Resonance”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2503-2507. doi:10.18429/JACoW-IPAC2017-WEXB1
[n] V. A. Kushnir et al., “High Power Electron S-band Linac for Industrial Purposes”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB070, pp. 2878-2880.
[n] F. Tamura et al., “Development of the Feed-forward System for Beam Loading Compensation in the J-PARC RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH130, pp. 1319-1321.
[n] J. Lee, S. O. Cho, B. C. Lee, and Y. U. Jeong, “Measurement of Electron Bunch Timing Jitter Using Stroboscopic Method”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU453, pp. 440-442.
[n] R. Wasef et al., “Space Charge Effects and Limitations in the Cern Proton Synchrotron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA070, pp. 2669-2671.
[n] D. Evans, R. Valicenti, and F. W. Wood, “Integrated Design of the SSC Linac Injector”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-68, pp. 238-240.
[n] A. Garonna et al., “Status of the Proton Beam Commissioning at the MedAustron Ion Beam Therapy Centre”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 28-30. doi:10.18429/JACoW-IPAC2015-MOBB1
[n] Y. Wei, “Analysis of BEPCII Optics Using Orbit Response Matrix”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN072, pp. 1544-1546.
[n] B. Parker et al., “Superconducting Magnets for a Final Focus Upgrade of ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP044, pp. 235-237.
[n] T. Korhonen et al., “Status of the European Spallation Source Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1177-1181. doi:10.18429/JACoW-ICALEPCS2015-FRB3O02
[n] O. Geithner et al., “Ion-optical Measurements at CRYRING@ESR during Commissioning”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3161-3164. doi:10.18429/JACoW-IPAC2018-THPAF077
[n] M. Joyce and A. Miller, “Accelerator Operators and Software Development”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP076, pp. XX-XX.
[n] Y. Yamamoto et al., “Recent progress of robotic R&D for SRF at KEK”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP63, unpublished.
[n] M. Wartak et al., “Status of the cryomodule tests as a part of Polish in-kind contribution to the European Spallation Source (ESS) realized by IFJ PAN”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7155, unpublished.
[n] M. Komiyama, N. Fukunishi, and A. Uchiyama, “Construction of New Data Archive System in RIKEN RI Beam Factory”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN005, pp. 90-93.
[n] A. Garcia-Tabares et al., “Optics-measurement-based BPM Calibration”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3328-3331. doi:10.18429/JACoW-IPAC2016-THPMB041
[n] M. I. Frankl et al., “Energy Deposition Studies and Analysis of the Quench Behavior in the Case of Asynchronous Dumps During 6.5 TeV LHC Proton Beam Operation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 736-739. doi:10.18429/JACoW-IPAC2018-TUPAF028
[n] P. D. Hermes et al., “Improved Aperture Measurements at the LHC and Results from their Application in 2015”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1446-1449. doi:10.18429/JACoW-IPAC2016-TUPMW014
[n] K. Takahashi et al., “Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1766-1768. doi:10.18429/JACoW-IPAC2016-TUPOW011
[n] D. Einfeld et al., “Status of the 2.5 GeV Light Source ANKA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B15, pp. 619-621.
[n] R. A. Rimmer, T. E. Plawski, H. Wang, A. Dudas, S. A. Kahn, and M. L. Neubauer, “Magnetron R&D toward the Amplitude Modulation Control for SRF Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3986-3989. doi:10.18429/JACoW-IPAC2018-THPAL145
[n] J. C. Smith, J. E. Doyle, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Mechanical and Thermal Prototype Testing for a Rotatable Collimator for the LHC Phase II Collimation Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC095, pp. 286-288.
[n] J. C. Smith, J. E. Doyle, L. Keller, L. Lari, S. A. Lundgren, and T. W. Markiewicz, “Design of a Rotatable Copper Collimator for the LHC Phase II Collimation Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC096, pp. 289-291.
[n] A. Noda et al., “Experimental Strategy for Realization of 3-D Beam Ordering with Use of Tapered Cooling at S-LSR”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAY06, pp. 231-235.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Quaranta, R. Bruce, and S. Redaelli, “SixTrack Simulation of Off-momentum Cleaning in LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO037, pp. 972-974.
- E. Donoghue et al., “Studies of Electron Activities in SNS-Type Superconducting RF Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP67, pp. 402-405.
- T. Inagaki et al., “Construction Status of C-band Main Accelerator for XFEL/SPring-8”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA009, pp. 3691-3693.
- P. B. Wilson et al., “Bunch Lengthening and Related Effects in SPEAR II”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1211-1215.
- F. Y. Wang, C. Adolphsen, J. P. Eichner, C. D. Nantista, and L. Xiao, “Experimental Study of Surface RF Magnetic Field Enhancement Caused by Closely Spaced Protrusions”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3949-3951.
- K. Sennyu, H. Hara, M. Matsuoka, and T. Yanagisawa, “Status of the Superconducting Cavity Development for ILC at MHI”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD009, pp. 463-465.
- S. J. Park et al., “Beam Diagnostic System for High Intensity Proton Linac at KAERI”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB059, pp. 2539-2541.
- K. Enami et al., “Performance Evaluation of ERL Main Linac Tuner”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2534-2536.
- D. Hagedorn, F. Rodriguez-Mateos, and R. Schmidt, “Protection of LHC Superconducting Corrector Magnets”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP025G, pp. 2255-2257.
- S. Jin et al., “Magnetic Shielding for the 1.3 GHz Cryomodule at IHEP”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME010, pp. 3528-3530.
- P. Asboe-Hansen et al., “Acceleration and Stacking of Deuterons in the CERN PS and ISR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1557-1561.
- S. Z. Li et al., “Results from Plasma Wakefield Acceleration Experiments at FACET”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPZ023, pp. 2814-2816.
- S. Artikova, K. Ikegami, T. Shibata, and Y. Kondo, “Beam Dynamics Studies on Low and Medium Energy Beam Transport With Intense H- Ions for J-PARC Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4439-4441.
- Y. Wang et al., “Dynamic Aperture Study of the CEPC Main Ring with Interaction Region”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3795-3797.
- J. M. Vogt, J. Knobloch, and O. Kugeler, “High Q0 Research: The Dynamics of Flux Trapping in Superconducting Niobium”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUIOA02, pp. 374-377.
- F. Carra et al., “Mechanical Engineering and Design of Novel Collimators for HL-LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 369-372.
- J. M. Koch, F. Epaud, E. Plouviez, and K. B. Scheidt, “Fast Orbit Correction for the ESRF Storage Ring”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS010, pp. 177-179.
- A. Takagi et al., “An Irradiation System for Carbon Stripper Foils with 750 keV H- Beams”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS028, pp. 1550-1552.
- N. Sakamoto et al., “5 year operation of RIKEN super-conducting linac”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 1-7.
- R. De Maria, C. Boccard, W. H?Âfle, G. Kotzian, C. Palau Montava, and B. Salvant, “Analysis of the Performance of the SPS Exponential Coupler Striplines using Beam Measurements and Simulation Data”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB054, pp. 2812-2814.
- R. De Maria, M. Giovannozzi, T. Persson, R. Tomas, and Y. Wei, “Analysis of Intensity-dependent Effects on LHC Transverse Tunes at Injection Energy”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2108-2111.
- J. Gao, “The Precise Measurement of Electric and Magnetic Fields in a Resonant Cavity”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO470, pp. 247-249.
- S. Liu, P. Bambade, S. Bai, T. Tauchi, and N. Terunuma, “Development of Diamond Sensors for Beam Halo and Compton Spectrum Diagnostics After The Interaction Point of ATF2”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME003, pp. 470-472.
- K. Noda et al., “Beam Transport System for the HIMAC”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XD-07, pp. 625-628.
- H. Podlech et al., “A Superconducting CH-Linac for IFMIF”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP080, pp. 3548-3550.
- A. Uchiyama, M. Komiyama, K. Yamada, and N. Fukunishi, “Implementation and initial deployment of embedded EPICS for MELSEC iQ-R in the SRILAC LLRF system”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 482-486.
- M. Rescic and L. Fernandez, “ESS Integrated Control System and the Agile Methodology”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC084, pp. 296-298.
- K. Mizushima et al., “Beam Spot Measurement using a Phosphor Screen for Carbon-Ion Therapy at NIRS”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB78, pp. 256-258.
- M.-H. Chun et al., “Operation Status of RF System for the PLS-II Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA048, pp. 187-189.
- Y.-M. Shin, A. H. Lumpkin, V. D. Shiltsev, and R. M. Thurman-Keup, “Feasibility of Continuously Focused TeV/m Channeling Acceleration with CNT-Channel”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2670-2673.
- N. Liu et al., “Performance Evaluation of the RF Reference Phase Stabilization System on Fiber-optical Link for KEK e-/e+ Injector LINAC”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 230-232.
- S. Mey et al., “Verifying the Single Bunch Capability of the New Injector at ELSA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC033, pp. 1072-1074.
- H. Bluem, R. A. Rimmer, T. Schultheiss, and L. M. Young, “Normal Conducting CW RF Gun Design for High Performance Electron Beams”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC067, pp. 223-225.
- J. Li, B. Du, Q. K. Jia, and H. T. Li, “Calculation and Analysis of the Magnetic Field of a Transverse Gradient Undulator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1130-1132.
- G. Trahern, “Status of the ESS Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRCAUST03, pp. 1345-1348.
- O. Kugeler, W. Anders, J. Knobloch, and A. Neumann, “Microphonics Measurements in a CW-driven TESLA-type Cavity”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH149, pp. 405-407.
- F. Epaud, J. M. Koch, and E. Plouviez, “Architecture and Control of the Fast Orbit Correction for the ESRF Storage Ring”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS014, pp. 189-191.
- B. Du, G. Huang, L. Lin, Y. T. Liu, and Z. Zhao, “Quadrature Directional Coupling Method for Precise RF Power Measurement”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 549-551.
- J. Lee and R. Cary, “Calculation of Finite-Length, Hollow-Beam Equilibria”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA80, pp. 2784-2786.
- X. He, Q. Li, C. Ma, J. Pang, and L. Zhao, “Preliminary Experimental Results of Axial B-dot Measuring Beam Tilt”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME046, pp. 577-579.
- P. Piot, G. A. Krafft, K. Jordan, A. Grippo, and J. Song, “Performance of the Electron Beam Diagnostics at Jefferson Lab's High Power Free Electron Laser”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA156, pp. 2229-2231.
- Y. Luo, P. Cameron, A. Della Penna, T. Satogata, and D. Trbojevic, “RHIC Beam-Based Sextupole Polarity Verification”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS098, pp. 1868-1870.
- I. Kohno et al., “RIKEN 160cm Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-04, pp. 46-49.
- Y. Wei, C. P. Welsch, G. X. Xia, K. Hanahoe, O. Mete, and J. Smith, “Investigations into Dielectric Laser-Driven Accelerators using the CST and VSIM Simulation Codes”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2618-2620.
- C. Barue et al., “Status Report on Metallic Beam Production at GANIL/SPIRAL 2”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 92-97.
- J. Tan, G. Bellodi, A. Feschenko, and S. A. Gavrilov, “Results from the CERN LINAC4 Longitudinal Bunch Shape Monitor”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 415-419.
- J. Niedziela, W. Fu, M. Harvey, G. J. Marr, T. Satogata, and V. Schoefer, “Dynamic Collaborative Documentation at the Brookhaven National Laboratory Collider-Acclerator Department”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS098, pp. 658-660.
- W. Liu, B. Du, G. Huang, L. Lin, L. Shang, and W. B. Song, “Development of 1.3 GHz Cavity Combiner for 24 kW CW SSA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4020-4022.
- O. Payir et al., “Massless Beam Separation System for Intense Ion Beams”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3736-3738.
- M. S. Stefani et al., “Magnetized Gridded Thermionic Electron Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2140-2143.
- V. S. Pronskikh et al., “Target Station Design for the Mu2e Experiment”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3970-3972.
- D. J. Harding et al., “Design and Fabrication of a Multi-element Corrector Magnet for the Fermilab Booster Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS006, pp. 452-454.
- I. V. Khodak, M. I. Ayzatsky, V. A. Kushnir, V. V. Mitrochenko, and V. F. Zhiglo, “Current Nanopulse Generation in RF Electron Gun with Metal-Dielectric Cathode”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB025, pp. 2098-2100.
- C.-Y. Liu, C. H. Kuo, and K.-B. Liu, “Design and Implementation of a Switching Mode Bipolar Power Stage of the Correction Power Supply”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF055, pp. 1729-1731.
- M. Komiyama, N. Fukunishi, A. Uchiyama, M. Hamanaka, and T. Nakamura, “Recent Improvements to the RIKEN RI Beam Factory Control System”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 31-34.
- A. Bertarelli et al., “Novel Materials for Collimators at LHC and its Upgrades”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO4AB03, pp. 438-442.
- T. Ohshima, H. Ego, N. Hosoda, H. Maesaka, T. Fukui, and M. Ishii, “Development of a New LLRF System Based on MicroTCA.4 for the SPring-8 Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3996-3999.
- D. Einfeld, “ALBA Synchrotron Light Source Commissioning”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOXAA01, pp. 1-5.
- P. Cameron et al., “Progress in Tune, Coupling, and Chromaticity Measurement and Feedback during RHIC Run 7”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOCC02, pp. 886-888.
- T. Nakagawa et al., “Production of Intense Beams of Highly Charged Heavy Ions from RIKEN 18 GHz ECRIS and Liquid He Free SC-ECRIS”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper G-4, pp. XX-XX.
- D. A. Chermoshentsev, S. A. Gavrilov, and A. Feschenko, “Influence of Mechanical Vibrations on the Phase Resolution of Bunch Shape Monitor”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 477-479.
- J. Reich, S. Martin, and C. Mayer-Boericke, “Ray Tracing Calculations According to Field Mapping for the Julich Double Monochromator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 835-837.
- D. Einfeld, “Status of the ALBA Project”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN066, pp. 1073-1075.
- R. L. Bennett, “Ion Source Control through High Voltage Isolation Distances Utilizing photon-Coupled Solid State Devices”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 901-903.
- C. C. Paulson and R. A. Hartley, “Effect of Tank Sequencing on CCL Accelerators”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU409, pp. 321-325.
- J. Pang, S. Chen, X. He, S. Pei, H. Shi, and J. R. Zhang, “Primary Design of 4 a S-band Linac using Slotted Iris Structure for Hom Damping”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 76-78.
- R. Fullwood, E. R. Gaerttner, and R. Krasse, “Qualitative Effects of Radiation Damage on Equipment and Components at the R. P. I. Linac”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 705-708.
- D. Jeon et al., “Progress of the RAON”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 36-38.
- T. Sakai et al., “RF Characteristics of 20K Cryogenic 2.6-cell Photocathode RF-gun Test Cavity”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP106, pp. 671-673.
- G. Franchetti, S. S. Gilardoni, A. Huschauer, F. Schmidt, and R. Wasef, “Studies and Observations of Beam Dynamics Near a Sum Resonance”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2503-2507.
- V. A. Kushnir et al., “High Power Electron S-band Linac for Industrial Purposes”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB070, pp. 2878-2880.
- F. Tamura et al., “Development of the Feed-forward System for Beam Loading Compensation in the J-PARC RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH130, pp. 1319-1321.
- J. Lee, S. O. Cho, B. C. Lee, and Y. U. Jeong, “Measurement of Electron Bunch Timing Jitter Using Stroboscopic Method”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU453, pp. 440-442.
- R. Wasef et al., “Space Charge Effects and Limitations in the Cern Proton Synchrotron”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA070, pp. 2669-2671.
- D. Evans, R. Valicenti, and F. W. Wood, “Integrated Design of the SSC Linac Injector”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-68, pp. 238-240.
- A. Garonna et al., “Status of the Proton Beam Commissioning at the MedAustron Ion Beam Therapy Centre”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 28-30.
- Y. Wei, “Analysis of BEPCII Optics Using Orbit Response Matrix”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN072, pp. 1544-1546.
- B. Parker et al., “Superconducting Magnets for a Final Focus Upgrade of ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP044, pp. 235-237.
- T. Korhonen et al., “Status of the European Spallation Source Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1177-1181.
- O. Geithner et al., “Ion-optical Measurements at CRYRING@ESR during Commissioning”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3161-3164.
- M. Joyce and A. Miller, “Accelerator Operators and Software Development”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP076, pp. XX-XX.
- Y. Yamamoto et al., “Recent progress of robotic R&D for SRF at KEK”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP63, unpublished.
- M. Wartak et al., “Status of the cryomodule tests as a part of Polish in-kind contribution to the European Spallation Source (ESS) realized by IFJ PAN”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7155, this conference.
- M. Komiyama, N. Fukunishi, and A. Uchiyama, “Construction of New Data Archive System in RIKEN RI Beam Factory”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN005, pp. 90-93.
- A. Garcia-Tabares et al., “Optics-measurement-based BPM Calibration”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3328-3331.
- M. I. Frankl et al., “Energy Deposition Studies and Analysis of the Quench Behavior in the Case of Asynchronous Dumps During 6.5 TeV LHC Proton Beam Operation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 736-739.
- P. D. Hermes et al., “Improved Aperture Measurements at the LHC and Results from their Application in 2015”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1446-1449.
- K. Takahashi et al., “Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1766-1768.
- D. Einfeld et al., “Status of the 2.5 GeV Light Source ANKA”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B15, pp. 619-621.
- R. A. Rimmer, T. E. Plawski, H. Wang, A. Dudas, S. A. Kahn, and M. L. Neubauer, “Magnetron R&D toward the Amplitude Modulation Control for SRF Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3986-3989.
- J. C. Smith, J. E. Doyle, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Mechanical and Thermal Prototype Testing for a Rotatable Collimator for the LHC Phase II Collimation Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC095, pp. 286-288.
- J. C. Smith, J. E. Doyle, L. Keller, L. Lari, S. A. Lundgren, and T. W. Markiewicz, “Design of a Rotatable Copper Collimator for the LHC Phase II Collimation Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC096, pp. 289-291.
- A. Noda et al., “Experimental Strategy for Realization of 3-D Beam Ordering with Use of Tapered Cooling at S-LSR”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEAY06, pp. 231-235.
Back to search