Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. J. Barnes et al., “Operational Experience of a Prototype LHC Injection Kicker Magnet with a Low SEY Coating and Redistributed Power Deposition”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3974-3977. doi:10.18429/JACoW-IPAC2019-THPRB072
[n] A. Lyapin et al., “Development of the S-Band BPM System for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP025, pp. 4003-4005.
[n] W. Anders et al., “BERLinPro: a Prototype ERL for Future Synchrotron Light Sources”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO017, pp. 223-227.
[n] G. Issarovitch, D. Proch, D. Reschke, W. Singer, and X. Singer, “Development of Centrifugal Barrel Polishing for Treatment of Superconducting Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP56, pp. 482-485.
[n] M. Takao et al., “Estimation of the Longitudinal Impedance of the ATF Damping Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 506-509.
[n] L. J. Nevay et al., “LHC Collimation and Energy Deposition Studies Using Beam Delivery Simulation (BDSIM)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3101-3103. doi:10.18429/JACoW-IPAC2016-WEPOY047
[n] P. Van Trappen, R. Noulibos, and W. J. M. Weterings, “Stripping Foil Displacement Unit Control for H- Injection in PSB at CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 363-366. doi:10.18429/JACoW-ICALEPCS2015-MOPGF121
[n] J. K. Spradlin, C. E. Reece, O. Trofimova, and A-M. Valente-Feliciano, “Automation of Particulate Characterization”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 477-481. doi:10.18429/JACoW-SRF2019-TUP030
[n] S. N. Galyamin, A. Aryshev, A. A. Grigoreva, A. V. Tyukhtin, and V. V. Vorobev, “Radiation from a Dielectrically Loaded Waveguide with Open End”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 228-230. doi:10.18429/JACoW-IPAC2019-MOPGW061
[n] Yuri K. Batygin, “Halo-Free Beam Transport in Nonlinear Focusing Channel”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E201, pp. 611-613.
[n] S. J. Miller, J. Binkowski, M. J. Johnson, Y. Xu, and A. Facco, “Design for Manufacture of Superconducting Halfwave Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO051, pp. 213-215.
[n] O. Mouton et al., “Computer-assisted Electron Beam Characterization at AIRIX Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN013, pp. 3250-3252.
[n] C. Y. Wu et al., “Integration of the Timing System for TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1833-1835. doi:10.18429/JACoW-IPAC2014-TUPRI113
[n] S. R. Mane, “Ideas for Siberian Snakes and Spin Rotators in Very High Energy e+e- Rings”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 47-48. doi:10.18429/JACoW-eeFACT2016-MOT4H7
[n] S. M. Lidia, J. Corlett, J. Pusina, J. Staples, and A. Zholents, “An Injector for the Proposed Berkeley Ultrafast X-Ray Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB021, pp. 2086-2088.
[n] I. N. Onishchenko, V. Kiselev, A. Linnik, V. Mirny, and V. Uskov, “Wakefield Excitation in Plasma Filled Dielectric Structure by a Train of Electron Bunches”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP085, pp. 2995-2997.
[n] Y. Cai, J. Seeman, K. G. Sonnad, and U. Wienands, “Doubling the PEP-II Luminosity in Simulations”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS048, pp. 649-651.
[n] H. J. Kim, “Progress on Superconducting Linac for the RAON Heavy Ion Accelerator”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEA1C02, pp. 180-182.
[n] C. H. Haquin and F. Negoita, “Development of the Thermal Beam Loss Monitors of the Spiral2 Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC043, pp. 181-183.
[n] D. Quartullo, L. Intelisano, I. Karpov, and G. Papotti, “Simulation Studies of Longitudinal Stability for High-Intensity LHC-Type Beams in the CERN SPS”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2249-2252. doi:10.18429/JACoW-IPAC2022-WEPOMS009
[n] J. A. Mock, A. S. Fisher, R. T. Herbst, P. Krejcik, and L. Sapozhnikov, “Commissioning of the LCLS-II Machine Protection System for MHz CW Beams”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 154-159. doi:10.18429/JACoW-IBIC2023-TU3I01
[n] D. R. Xu, Z. H. Bai, L. Wang, W. Wang, and H. Xu, “Corrector Layout Optimization Using NSGA-II for HALS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4629-4631. doi:10.18429/JACoW-IPAC2018-THPMK135
[n] L. Hagge et al., “DESY EDMS: Information Management for World-Wide Collaborations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP045, pp. 2896-2898.
[n] R. Boni, “HOM-free Cavities”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY01A, pp. 182-186.
[n] B. Franzke and G. Eickhoff, “Separation of Reaction or Decay Products from Cooled Ion Beams Stored in the ESR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1093-1096.
[n] J. Tamura, A. Miura, T. Morishita, H. Ao, T. Maruta, and T. Miyao, “Development of H0 Beam Diagnostic Line in MEBT2 of J-PARC Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 277-279. doi:10.18429/JACoW-LINAC2016-MOPLR063
[n] S. C. Leemann and M. Eriksson, “Coupling and Brightness Considerations for the MAX IV 3 GeV Storage Ring”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO05, pp. 243-245.
[n] B. Yee-Rend??n, Y. Kondo, F. M. Maekawa, S. I. Meigo, and J. Tamura, “Beam Optics Design of the Superconducting Region of the JAEA ADS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 181-183. doi:10.18429/JACoW-IPAC2019-MOPGW040
[n] H. T. Li, Z. G. He, and Q. K. Jia, “A Simple Method for Generating a Few Femtosecond Pulses in Seeded FELs”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP009, pp. 371-373.
[n] L. Intelisano, H. Damerau, and I. Karpov, “Measurements of longitudinal Loss of Landau damping in the CERN Proton Synchrotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2665-2668. doi:10.18429/JACoW-IPAC2023-WEPA012
[n] T. V. Shaftan et al., “Electron Bunch Compression in the SDL Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI100, pp. 834-836.
[n] W. Duckitt, J. Abraham, J. L. Conradie, M. J. Van Niekerk, and T. R. Niesler, “A New Digital Low-level RF Control System for Cyclotrons”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 258-262. doi:10.18429/JACoW-Cyclotrons2016-WEB01
[n] K. Hosoyama et al., “Development of the KEK-B Superconducting Crab Cavity”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THXM02, pp. 2927-2931.
[n] R. Xiang and J. Teichert, “Electron Sources and Polarization”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 94-99. doi:10.18429/JACoW-eeFACT2016-TUT2H6
[n] I. Gonin, A. I. Fedoseev, V. P. Gorbul, M. S. Kaschiev, and V. V. Paramonov, “2 D Codes Set for RF Cavities Design”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1026-1029.
[n] M. Tobiyama, H. Ikeda, and G. Mitsuka, “Development of Bunch Position Monitors to Observe Sudden Beam Loss of SuperKEKB Rings”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 179-182. doi:10.18429/JACoW-IBIC2023-TUP002
[n] J. Choi, H.-S. Kang, and T.-Y. Lee, “Features of the PAL-XFEL Design”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH062, pp. 152-155.
[n] D. A. Harder, G. Rakowsky, and J. Skaritka, “Magnetic Measurement System for the NSLS Superconducting Undulator Vertical Test Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT021, pp. 1730-1732.
[n] A. Rajabi and R. Wanzenberg, “Resistive wall impedance of multilayer beam pipes of general cross sections”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3402-3404. doi:10.18429/JACoW-IPAC2023-WEPL124
[n] Y. Sun and M. Borland, “Optics Design and Beam Dynamics Optimization of a Five-bend Achromat Lattice for the Advanced Photon Source Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO10, pp. 258-260.
[n] S. Pei et al., “Conceptual Design of the Drive Beam for a PWFA-LC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP079, pp. 2682-2684.
[n] H. G. Lee et al., “Analysis and Design of Backing Beam for U10 Undulator at the PLS”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16035, pp. XX-XX.
[n] Y. Yoshida et al., “Development of a New Picosecond Pulse Radiolysis System by Using Femtosecond Laser Synchronized with Picosecond Electron Beams”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E102, pp. 596-598.
[n] J. P. Gourber, G. Guignard, A. Hofmann, J. P. Koutchouk, and H. Moshammer, “Compensation of Linear Betatron Coupling in LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1429-1432.
[n] I. G. Brown, H. Emig, C. Muehle, E. M. Oks, and P. Spaedtke, “Development of a Vacuum Arc Metal Ion Source for Heavy Ion Accelerators”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP032L, pp. 1484-1486.
[n] L. Hagge, S. Eucker, J. Kreutzkamp, and D. Szepielak, “The XFEL Roombook - Processes and Tools for Designing the Technical Infrastructure of the European XFEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP046, pp. 2899-2901.
[n] M. Basten et al., “Development of a 217 MHz Superconducting CH Structure”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP060, pp. 563-565.
[n] H. Sakai et al., “High Power Tests of KEK-ERL Input Coupler for Main Linac Under LN2 Condition”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO005, pp. 356-360.
[n] K. Muto, Z. Igarashi, and S. Shibata, “Simple Q - Measurement of KEK Proton Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1818-1821.
[n] J. B. Rosenzweig et al., “Optimum Beam Creation in Photoinjectors Using Space-charge Expansion”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS098, pp. 0-3645.
[n] G. Tranquille and J. Cenede, “Design and Optimisation of the ELENA Electron Cooler Gun and Collector”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3354-3356. doi:10.18429/JACoW-IPAC2016-THPMB048
[n] R. J. Barlow, H. Fieguth, W. Kozanecki, S. A. Majewski, P. Roudeau, and A. Stocchi, “Simulation of PEP-II Accelerator Backgrounds Using TURTLE”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP023, pp. 1835-1837.
[n] Y. Kondo, K. Hasegawa, T. Morishita, H. Kawamata, F. Naito, and T. Sugimura, “Recent Progress with the J-PARC RFQs”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB052, pp. 972-974.
[n] S. Abeyratne and B. Erdelyi, “The First Particle-Based Proof of Principle Numerical Simulation of Electron Cooling”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1241-1244. doi:10.18429/JACoW-NAPAC2016-THPOA68
For LaTeX
Use Complete Form
For BibTeX
References
- M. J. Barnes et al., “Operational Experience of a Prototype LHC Injection Kicker Magnet with a Low SEY Coating and Redistributed Power Deposition”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3974-3977.
- A. Lyapin et al., “Development of the S-Band BPM System for ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP025, pp. 4003-4005.
- W. Anders et al., “BERLinPro: a Prototype ERL for Future Synchrotron Light Sources”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO017, pp. 223-227.
- G. Issarovitch, D. Proch, D. Reschke, W. Singer, and X. Singer, “Development of Centrifugal Barrel Polishing for Treatment of Superconducting Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP56, pp. 482-485.
- M. Takao et al., “Estimation of the Longitudinal Impedance of the ATF Damping Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 506-509.
- L. J. Nevay et al., “LHC Collimation and Energy Deposition Studies Using Beam Delivery Simulation (BDSIM)”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3101-3103.
- P. Van Trappen, R. Noulibos, and W. J. M. Weterings, “Stripping Foil Displacement Unit Control for H- Injection in PSB at CERN”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 363-366.
- J. K. Spradlin, C. E. Reece, O. Trofimova, and A-M. Valente-Feliciano, “Automation of Particulate Characterization”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 477-481.
- S. N. Galyamin, A. Aryshev, A. A. Grigoreva, A. V. Tyukhtin, and V. V. Vorobev, “Radiation from a Dielectrically Loaded Waveguide with Open End”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 228-230.
- Yuri K. Batygin, “Halo-Free Beam Transport in Nonlinear Focusing Channel”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5E201, pp. 611-613.
- S. J. Miller, J. Binkowski, M. J. Johnson, Y. Xu, and A. Facco, “Design for Manufacture of Superconducting Halfwave Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO051, pp. 213-215.
- O. Mouton et al., “Computer-assisted Electron Beam Characterization at AIRIX Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN013, pp. 3250-3252.
- C. Y. Wu et al., “Integration of the Timing System for TPS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1833-1835.
- S. R. Mane, “Ideas for Siberian Snakes and Spin Rotators in Very High Energy e+e- Rings”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 47-48.
- S. M. Lidia, J. Corlett, J. Pusina, J. Staples, and A. Zholents, “An Injector for the Proposed Berkeley Ultrafast X-Ray Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB021, pp. 2086-2088.
- I. N. Onishchenko, V. Kiselev, A. Linnik, V. Mirny, and V. Uskov, “Wakefield Excitation in Plasma Filled Dielectric Structure by a Train of Electron Bunches”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP085, pp. 2995-2997.
- Y. Cai, J. Seeman, K. G. Sonnad, and U. Wienands, “Doubling the PEP-II Luminosity in Simulations”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS048, pp. 649-651.
- H. J. Kim, “Progress on Superconducting Linac for the RAON Heavy Ion Accelerator”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEA1C02, pp. 180-182.
- C. H. Haquin and F. Negoita, “Development of the Thermal Beam Loss Monitors of the Spiral2 Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC043, pp. 181-183.
- D. Quartullo, L. Intelisano, I. Karpov, and G. Papotti, “Simulation Studies of Longitudinal Stability for High-Intensity LHC-Type Beams in the CERN SPS”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2249-2252.
- J. A. Mock, A. S. Fisher, R. T. Herbst, P. Krejcik, and L. Sapozhnikov, “Commissioning of the LCLS-II Machine Protection System for MHz CW Beams”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TU3I01, pp. 154-159.
- D. R. Xu, Z. H. Bai, L. Wang, W. Wang, and H. Xu, “Corrector Layout Optimization Using NSGA-II for HALS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4629-4631.
- L. Hagge et al., “DESY EDMS: Information Management for World-Wide Collaborations”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP045, pp. 2896-2898.
- R. Boni, “HOM-free Cavities”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUY01A, pp. 182-186.
- B. Franzke and G. Eickhoff, “Separation of Reaction or Decay Products from Cooled Ion Beams Stored in the ESR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1093-1096.
- J. Tamura, A. Miura, T. Morishita, H. Ao, T. Maruta, and T. Miyao, “Development of H0 Beam Diagnostic Line in MEBT2 of J-PARC Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 277-279.
- S. C. Leemann and M. Eriksson, “Coupling and Brightness Considerations for the MAX IV 3 GeV Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO05, pp. 243-245.
- B. Yee-Rend??n, Y. Kondo, F. M. Maekawa, S. I. Meigo, and J. Tamura, “Beam Optics Design of the Superconducting Region of the JAEA ADS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 181-183.
- H. T. Li, Z. G. He, and Q. K. Jia, “A Simple Method for Generating a Few Femtosecond Pulses in Seeded FELs”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP009, pp. 371-373.
- L. Intelisano, H. Damerau, and I. Karpov, “Measurements of longitudinal Loss of Landau damping in the CERN Proton Synchrotron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA012, pp. 2665-2668.
- T. V. Shaftan et al., “Electron Bunch Compression in the SDL Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI100, pp. 834-836.
- W. Duckitt, J. Abraham, J. L. Conradie, M. J. Van Niekerk, and T. R. Niesler, “A New Digital Low-level RF Control System for Cyclotrons”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 258-262.
- K. Hosoyama et al., “Development of the KEK-B Superconducting Crab Cavity”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THXM02, pp. 2927-2931.
- R. Xiang and J. Teichert, “Electron Sources and Polarization”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 94-99.
- I. Gonin, A. I. Fedoseev, V. P. Gorbul, M. S. Kaschiev, and V. V. Paramonov, “2 D Codes Set for RF Cavities Design”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1026-1029.
- M. Tobiyama, H. Ikeda, and G. Mitsuka, “Development of Bunch Position Monitors to Observe Sudden Beam Loss of SuperKEKB Rings”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TUP002, pp. 179-182.
- J. Choi, H.-S. Kang, and T.-Y. Lee, “Features of the PAL-XFEL Design”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH062, pp. 152-155.
- D. A. Harder, G. Rakowsky, and J. Skaritka, “Magnetic Measurement System for the NSLS Superconducting Undulator Vertical Test Facility”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT021, pp. 1730-1732.
- A. Rajabi and R. Wanzenberg, “Resistive wall impedance of multilayer beam pipes of general cross sections”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL124, pp. 3402-3404.
- Y. Sun and M. Borland, “Optics Design and Beam Dynamics Optimization of a Five-bend Achromat Lattice for the Advanced Photon Source Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO10, pp. 258-260.
- S. Pei et al., “Conceptual Design of the Drive Beam for a PWFA-LC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP079, pp. 2682-2684.
- H. G. Lee et al., “Analysis and Design of Backing Beam for U10 Undulator at the PLS”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16035, pp. XX-XX.
- Y. Yoshida et al., “Development of a New Picosecond Pulse Radiolysis System by Using Femtosecond Laser Synchronized with Picosecond Electron Beams”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5E102, pp. 596-598.
- J. P. Gourber, G. Guignard, A. Hofmann, J. P. Koutchouk, and H. Moshammer, “Compensation of Linear Betatron Coupling in LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1429-1432.
- I. G. Brown, H. Emig, C. Muehle, E. M. Oks, and P. Spaedtke, “Development of a Vacuum Arc Metal Ion Source for Heavy Ion Accelerators”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP032L, pp. 1484-1486.
- L. Hagge, S. Eucker, J. Kreutzkamp, and D. Szepielak, “The XFEL Roombook - Processes and Tools for Designing the Technical Infrastructure of the European XFEL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP046, pp. 2899-2901.
- M. Basten et al., “Development of a 217 MHz Superconducting CH Structure”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP060, pp. 563-565.
- H. Sakai et al., “High Power Tests of KEK-ERL Input Coupler for Main Linac Under LN2 Condition”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO005, pp. 356-360.
- K. Muto, Z. Igarashi, and S. Shibata, “Simple Q - Measurement of KEK Proton Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1818-1821.
- J. B. Rosenzweig et al., “Optimum Beam Creation in Photoinjectors Using Space-charge Expansion”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS098, pp. 0-3645.
- G. Tranquille and J. Cenede, “Design and Optimisation of the ELENA Electron Cooler Gun and Collector”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3354-3356.
- R. J. Barlow, H. Fieguth, W. Kozanecki, S. A. Majewski, P. Roudeau, and A. Stocchi, “Simulation of PEP-II Accelerator Backgrounds Using TURTLE”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP023, pp. 1835-1837.
- Y. Kondo, K. Hasegawa, T. Morishita, H. Kawamata, F. Naito, and T. Sugimura, “Recent Progress with the J-PARC RFQs”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB052, pp. 972-974.
- S. Abeyratne and B. Erdelyi, “The First Particle-Based Proof of Principle Numerical Simulation of Electron Cooling”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1241-1244.
Back to search