Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Jeff, T. Lefevre, and C. P. Welsch, “Off-Axis Undulator Radiation for CLIC Drive Beam Diagnostics”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF10, pp. 228-231.
[n] P. Van Trappen, E. Carlier, and S. Uyttenhove, “A Fast Interlock Detection System for High-Power Switch Protection”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 367-370. doi:10.18429/JACoW-ICALEPCS2015-MOPGF122
[n] H. Jiang, P. Li, and T. G. Xu, “Measurements of Beam Halo by Wire Scanner Monitor”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 393-395. doi:10.18429/JACoW-IBIC2015-TUPB030
[n] D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3621-3623. doi:10.18429/JACoW-IPAC2017-WEPVA150
[n] J. W. G. Thomason et al., “The RFQ Test Stand Ion Source at RAL”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI011, pp. 1741-1743.
[n] M. Boscolo et al., “Machine Detector Interface for the e+e- Future Circular Collider”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 201. doi:10.18429/JACoW-eeFACT2018-WEXBA02
[n] T. Ieiri et al., “Beam Monitors and Transverse Feedback Systems of TRISTAN Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 729-732.
[n] A. Bardi et al., “The CDF-II Online Silicon Vertex Tracker”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THBT003, pp. XX-XX.
[n] K. Akai et al., “Higher-Order Mode HOM Characteristics of the Choke-Mode Cavity for the KEK B-Factory KEKB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP095L, pp. 2074-2078.
[n] E. Cavaliere et al., “High Pressure Rinsing Parameters Measurements”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP10, pp. 475-477.
[n] C. Ohmori et al., “New Cutting Scheme of Magnetic Alloy Cores for J-PARC Synchrotrons”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH128, pp. 1313-1315.
[n] A. Bosotti, C. Pagani, N. Panzeri, and R. Paparella, “The Coaxial Tuner for ILCTANML at Fermilab”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP146, pp. 895-897.
[n] A. Uchiyama et al., “Development of Embedded EPICS on F3RP61-2L”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEX03, pp. 145-147.
[n] W. X. Cheng, B. Bacha, Y. Li, O. Singh, and Y. Tian, “Beam Stability During Top Off Operation at NSLS-II Storage Ring”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 425-427. doi:10.18429/JACoW-NAPAC2016-TUPOA71
[n] O. Actis, A. Mayor, D. Meer, and D. C. Weber, “Precise Beam Delivery for Proton Therapy with Dynamic Energy Modulation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 540-542. doi:10.18429/JACoW-IPAC2018-MOPML059
[n] A. Solodko et al., “Novel Manufacturing Concepts for 12 GHz High Gradient Accelerating Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3787-3790. doi:10.18429/JACoW-IPAC2017-THPAB039
[n] T. Tanabe, T. Honma, and T. Watanabe, “Electron Cooler at INS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 651-654.
[n] R. Geller, K. Golovanivsky, and G. Melin, “ECRIPAC: A New Concept for the Production and Acceleration to Very High Energies of Multiply Charged Ions Using an ECR Plasma”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 449-452.
[n] A. De Franco et al., “Upgrade Study of the MedAustron Ion Beam Center”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4619-4622. doi:10.18429/JACoW-IPAC2017-THPVA074
[n] K. Alrutz-Ziemssen et al., “First Operation of the Superconducting 130 MeV CW-Electron-Accelerator at Darmstadt”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH416, pp. 626-628.
[n] P. Martel, Ch. Delamare, G. Godineau, and R. Nunes, “ADaMS 3: An Enhanced Access Control System for CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 401-404. doi:10.18429/JACoW-ICALEPCS2015-MOPGF136
[n] G. L. Xu, G. Lei, L. Wang, Y. L. Zhang, and P. Zhu, “CSNS Timing System Prototype”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS028, pp. 386-388.
[n] L. S?©by, D. J. Williams, A. Jansson, and M. Lindroos, “Measurements with the Magnetic Quadrupole Pick-up in the CERN PS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A05, pp. 1744-1746.
[n] R. Sandstrom, D. Huang, and J. Norem, “Study of Radiation From RF Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP106, pp. 805-807.
[n] P. H??lsmann, R. Balss, H. Klingbeil, and U. Laier, “Bunch Compression for FAIR”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP023, pp. 864-866.
[n] P. A. Letnes, S. Bart Pedersen, A. Brielmann, H. Burkhardt, and D. K. Kramer, “Beam Scraping to Detect and Remove Halo in LHC Injection”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC149, pp. 3339-3341.
[n] J. Poole and C. Petit-Jean-Genaz, “JACoW, a Collaboration Serving the Accelerator Community”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THZCH03, pp. 249-252.
[n] U. Amaldi et al., “A Flavour Factory and Nuclear Physics Facility Based on Superconducting Linacs”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 49-52.
[n] L. H. J. Bozyk and P. J. Spiller, “Ionization Loss and Dynamic Vacuum in Heavy Ion Synchrotrons”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2201-2204. doi:10.18429/JACoW-IPAC2017-TUPVA056
[n] C. E. Chen et al., “A Hybrid Laser-driven E-beam Injector using Photo-cathode Electron Gun and Superconducting Cavity”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP046L, pp. 1547-1549.
[n] JM. Filhol, L. Hardy, and U. Weinrich, “Status Report of the ESRF”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP31, pp. 2334-2336.
[n] W. Kaabi et al., “PERLE: A High Power Energy Recovery Facility”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1396-1399. doi:10.18429/JACoW-IPAC2019-TUPGW008
[n] T. Ilg et al., “Mechanical Design of the Drift-Tube Linac (DTL) for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB051, pp. 2841-2843.
[n] P. D. Brindza, D. E. Richied, and C. H. Rode, “Energy Doubler Refrigeration System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4102-4105.
[n] L. Badano, O. Ferrando, M. Pezzetta Fondazione TERA, and G. Molinari Geneva, “SLIM (SEM for Low Interception Monitoring) - An Innovative Non-Destructive Beam Monitor for the Extraction Lines of a Hadrontherapy Centre”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper CT09, pp. XX-XX.
[n] C. Liu, A. V. Fedotov, M. G. Minty, and V. Ptitsyn, “IBS Simulation with Different RF Configurations in RHIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2178-2180. doi:10.18429/JACoW-IPAC2017-TUPVA047
[n] Y. G??mez-Mart?¡nez et al., “Theoretical Study and Experimental Result of the RF Coupler Prototypes of Spiral 2”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH160, pp. 3170-3172.
[n] M. Ferrario, “Commissioning Results of the SPARC FEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper THOB01, pp. 734-738.
[n] F. C. Zhao et al., “Superconducting Elliptical Cavity (beta=0.45) and SRF Test Facility in IHEP”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP85, pp. XX-XX.
[n] R. Huhmann, G. Fr?Âhlich, S. J??licher, and V. R. W. Schaa, “GSI Operating Software Migration OpenVMS to Linux”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOX02, pp. 4-6.
[n] S. M. Lidia et al., “RK-TBA Studies in Ka-Band”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4021, pp. 97-99.
[n] G. Bassi and J. A. Ellison, “CSR Effects in a Bunch Compressor: Influence of the Beam Frame Transverse Force”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP022, pp. XX-XX.
[n] Y. Otake et al., “A Low-Power RF System with Accurate Synchronization for an S-Band RF-Gun Using a Laser-Triggered Photocathode”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-18, pp. 344-346.
[n] Y. Cai, “Analysis of Beam Dynamics in a Circular Higgs Factory”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT1B1, pp. 67-72.
[n] D. L. Schrage, E. Swensen, and B. Rusnak, “Static and Dynamic Analysis of Superconducting Cavities for a High Performance Proton Linac”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F17, pp. 629-633.
[n] Z. X. Liang, C. C. Han, K. Li, W. G. Li, and W. S. Qian, “Experimental Study of Long Coupled-Helix Resonator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2894-2897.
[n] E. Calvo Giraldo et al., “The LHC Beam Position System: Performance during 2010 and Outlook for 2011”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD12, pp. 323-325.
[n] X. Yang, V. V. Smaluk, Y. Tian, and L. Yu, “First Demonstration of the Transparent Fast-to-slow Corrector Current Shift in the NSLS-II Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1323-1326. doi:10.18429/JACoW-IPAC2018-TUPMF035
[n] J. K. Hao et al., “Recent Researches on RF Superconductivity in Peking University”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL022, pp. XX-XX.
[n] I. Hofmann, A. Orzhekhovskaya, S. Yaramyshev, I. Alber, K. Harres, and M. Roth, “Laser Accelerated Ions and Their Potential Use for Therapy Accelerators”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper FR-06, pp. 213-217.
[n] Y. Tanaka et al., “Study for Evaluation of Undulator Magnetic Field Using Vibrating Wire Method”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPB16, pp. 413-416.
[n] B. Salvant et al., “Building the Impedance Model of a Real Machine”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2249-2254. doi:10.18429/JACoW-IPAC2019-WEYPLS1
[n] S. Schreiber, J. H. Han, S. Lederer, P. M. Michelato, L. Monaco, and D. Sertore, “Cathode Issues at the FLASH Photoinjector”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper FRAAU05, pp. 552-555.
[n] M. A. Fraser et al., “Experimental Results of Crystal-Assisted Slow Extraction at the SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 623-626. doi:10.18429/JACoW-IPAC2017-MOPIK048
[n] S. Jolly, M. J. Easton, A. P. Letchford, and J. K. Pozimski, “Integrated Design Method and Beam Dynamics Simulations for the FETS Radio Frequency Quadrupole”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC076, pp. 645-647.
[n] C. R. Prior, “H- Injection Studies for the Fermilab Proton Driver”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH036, pp. 3305-3307.
[n] J. Bosser et al., “Single Bunch Profile Measurement Using Synchrotron Light from an Undulator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2164-2167.
[n] R. A. Kishek et al., “The University of Maryland Electron Ring (UMER) Enters a New Regime of High-Tune-Shift Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUZBAB03, pp. 820-824.
[n] J. Teichert et al., “First Operation Results of the Superconducting Photoinjector at ELBE”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP105, pp. 2755-2757.
[n] A. Drago et al., “Mitigation and Control of Instabilities in DANE Positron Ring”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG001, pp. 136-138.
[n] D. Mancini et al., “Active Optics Control of the VST Telescope with the CAN Field-Bus”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP057, pp. XX-XX.
[n] C. R. Prior, “Recommendations from the International Scoping Study for a Neutrino Factory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUXKI02, pp. 681-685.
[n] W. Fischer, T. Satogata, and R. Tomas, “Measurement of Transverse Echoes in RHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT027, pp. 1955-1957.
[n] C. K. Baribeau, D. Bertwistle, E. J. Ericson, J. T. Gilbert, and T. M. Pedersen, “Magnetic Measurements of Insertion Devices Using the Vibrating Wire Technique”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1683-1686. doi:10.18429/JACoW-IPAC2019-TUPRB004
[n] M. Chen et al., “Field Measurements of the ESR Magnets”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1142-1145.
[n] M. Tomizawa et al., “Status and Upgrade Plan of Slow Extraction from the J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB014, pp. 3912-3914.
[n] D. P. Jin et al., “EXPERIMENTAL BACKGROUND STUDY IN THE BEPCII/BESIII”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH08, pp. XX-XX.
[n] R. Garoby, “Upgrade Issues for the CERN Accelerator Complex”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper FRYAGM01, pp. 3734-3738.
[n] P. Briand et al., “Production of High Current-High Charge States Ion Beams with the Superconducting ECR Ion Source SERSE”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUO01B, pp. 287-289.
[n] D. Widegren, T. Ladzinski, R. Lyzwa, S. Mallon Amerigo, S. Petit, and B. Rousseau, “Micado - The Data Import Engine of the CERN Engineering and Equipment Data Management System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC131, pp. 1377-1379.
[n] L.Calabretta, “LNS CATANIA PROJECT FOR THERAPY AND?RADIOISOTOPE PRODUCTION”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18C1, pp. XX-XX.
[n] F. Herfurth et al., “The HITRAP Decelerator Linac at GSI”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4PBC05, pp. 1961-1963.
[n] J. Urakawa et al., “Development of a Multibunch Photo-cathode RF Gun System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT061, pp. 2628-2630.
[n] E. Vogel et al., “SRF Gun Development at DESY”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 105-108. doi:10.18429/JACoW-LINAC2018-MOPO037
[n] H. T. Edwards et al., “Construction of a 3.9 GHz Superconducting RF Cavity Module at Fermilab”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP058, pp. 957-959.
[n] C. G. Pang et al., “First Tests of Superkekb Fast Luminosity Monitors During 2018 Phase-2 Commissioning”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2254-2257. doi:10.18429/JACoW-IPAC2018-WEPAL038
[n] Y. Zhang, X. C. Kang, M. Li, J. X. Wu, and G. Zhu, “Design of Cold Beam Position Monitor for CADS Injector II Proton LINAC”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC13, pp. 75-77.
[n] S. Aumon et al., “Beam Instabilities Studies at Transition Crossing in the CERN Proton Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP050, pp. 4649-4651.
[n] D. Sertore, P. Michelato, L. Monaco, and C. Pagani, “R&D Activity on Alkali-Antimonied Photocathodes at INFN-Lasa”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4284-4286. doi:10.18429/JACoW-IPAC2018-THPMF088
[n] V. V. Zvoda et al., “Advanced Bent Crystal Collimation Studies at the Tevatron (T-980)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOODN3, pp. 73-75.
[n] T. Birke et al., “Status of the Control System for the Energy Recovery Linac bERLinPro at HZB”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1676. doi:10.18429/JACoW-ICALEPCS2019-FRAPP06
For LaTeX
Use Complete Form
For BibTeX
References
- A. Jeff, T. Lefevre, and C. P. Welsch, “Off-Axis Undulator Radiation for CLIC Drive Beam Diagnostics”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF10, pp. 228-231.
- P. Van Trappen, E. Carlier, and S. Uyttenhove, “A Fast Interlock Detection System for High-Power Switch Protection”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 367-370.
- H. Jiang, P. Li, and T. G. Xu, “Measurements of Beam Halo by Wire Scanner Monitor”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 393-395.
- D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3621-3623.
- J. W. G. Thomason et al., “The RFQ Test Stand Ion Source at RAL”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI011, pp. 1741-1743.
- M. Boscolo et al., “Machine Detector Interface for the e+e- Future Circular Collider”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 201.
- T. Ieiri et al., “Beam Monitors and Transverse Feedback Systems of TRISTAN Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 729-732.
- A. Bardi et al., “The CDF-II Online Silicon Vertex Tracker”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THBT003, pp. XX-XX.
- K. Akai et al., “Higher-Order Mode HOM Characteristics of the Choke-Mode Cavity for the KEK B-Factory KEKB”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP095L, pp. 2074-2078.
- E. Cavaliere et al., “High Pressure Rinsing Parameters Measurements”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP10, pp. 475-477.
- C. Ohmori et al., “New Cutting Scheme of Magnetic Alloy Cores for J-PARC Synchrotrons”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH128, pp. 1313-1315.
- A. Bosotti, C. Pagani, N. Panzeri, and R. Paparella, “The Coaxial Tuner for ILCTANML at Fermilab”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP146, pp. 895-897.
- A. Uchiyama et al., “Development of Embedded EPICS on F3RP61-2L”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEX03, pp. 145-147.
- W. X. Cheng, B. Bacha, Y. Li, O. Singh, and Y. Tian, “Beam Stability During Top Off Operation at NSLS-II Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 425-427.
- O. Actis, A. Mayor, D. Meer, and D. C. Weber, “Precise Beam Delivery for Proton Therapy with Dynamic Energy Modulation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 540-542.
- A. Solodko et al., “Novel Manufacturing Concepts for 12 GHz High Gradient Accelerating Structures”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3787-3790.
- T. Tanabe, T. Honma, and T. Watanabe, “Electron Cooler at INS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 651-654.
- R. Geller, K. Golovanivsky, and G. Melin, “ECRIPAC: A New Concept for the Production and Acceleration to Very High Energies of Multiply Charged Ions Using an ECR Plasma”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 449-452.
- A. De Franco et al., “Upgrade Study of the MedAustron Ion Beam Center”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4619-4622.
- K. Alrutz-Ziemssen et al., “First Operation of the Superconducting 130 MeV CW-Electron-Accelerator at Darmstadt”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH416, pp. 626-628.
- P. Martel, Ch. Delamare, G. Godineau, and R. Nunes, “ADaMS 3: An Enhanced Access Control System for CERN”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 401-404.
- G. L. Xu, G. Lei, L. Wang, Y. L. Zhang, and P. Zhu, “CSNS Timing System Prototype”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS028, pp. 386-388.
- L. S?©by, D. J. Williams, A. Jansson, and M. Lindroos, “Measurements with the Magnetic Quadrupole Pick-up in the CERN PS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A05, pp. 1744-1746.
- R. Sandstrom, D. Huang, and J. Norem, “Study of Radiation From RF Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP106, pp. 805-807.
- P. H??lsmann, R. Balss, H. Klingbeil, and U. Laier, “Bunch Compression for FAIR”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP023, pp. 864-866.
- P. A. Letnes, S. Bart Pedersen, A. Brielmann, H. Burkhardt, and D. K. Kramer, “Beam Scraping to Detect and Remove Halo in LHC Injection”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC149, pp. 3339-3341.
- J. Poole and C. Petit-Jean-Genaz, “JACoW, a Collaboration Serving the Accelerator Community”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THZCH03, pp. 249-252.
- U. Amaldi et al., “A Flavour Factory and Nuclear Physics Facility Based on Superconducting Linacs”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 49-52.
- L. H. J. Bozyk and P. J. Spiller, “Ionization Loss and Dynamic Vacuum in Heavy Ion Synchrotrons”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2201-2204.
- C. E. Chen et al., “A Hybrid Laser-driven E-beam Injector using Photo-cathode Electron Gun and Superconducting Cavity”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP046L, pp. 1547-1549.
- JM. Filhol, L. Hardy, and U. Weinrich, “Status Report of the ESRF”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP31, pp. 2334-2336.
- W. Kaabi et al., “PERLE: A High Power Energy Recovery Facility”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1396-1399.
- T. Ilg et al., “Mechanical Design of the Drift-Tube Linac (DTL) for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB051, pp. 2841-2843.
- P. D. Brindza, D. E. Richied, and C. H. Rode, “Energy Doubler Refrigeration System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4102-4105.
- L. Badano, O. Ferrando, M. Pezzetta Fondazione TERA, and G. Molinari Geneva, “SLIM (SEM for Low Interception Monitoring) - An Innovative Non-Destructive Beam Monitor for the Extraction Lines of a Hadrontherapy Centre”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper CT09, pp. XX-XX.
- C. Liu, A. V. Fedotov, M. G. Minty, and V. Ptitsyn, “IBS Simulation with Different RF Configurations in RHIC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2178-2180.
- Y. G??mez-Mart?¡nez et al., “Theoretical Study and Experimental Result of the RF Coupler Prototypes of Spiral 2”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH160, pp. 3170-3172.
- M. Ferrario, “Commissioning Results of the SPARC FEL”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper THOB01, pp. 734-738.
- F. C. Zhao et al., “Superconducting Elliptical Cavity (beta=0.45) and SRF Test Facility in IHEP”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP85, pp. XX-XX.
- R. Huhmann, G. Fr?Âhlich, S. J??licher, and V. R. W. Schaa, “GSI Operating Software Migration OpenVMS to Linux”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOX02, pp. 4-6.
- S. M. Lidia et al., “RK-TBA Studies in Ka-Band”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4021, pp. 97-99.
- G. Bassi and J. A. Ellison, “CSR Effects in a Bunch Compressor: Influence of the Beam Frame Transverse Force”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP022, pp. XX-XX.
- Y. Otake et al., “A Low-Power RF System with Accurate Synchronization for an S-Band RF-Gun Using a Laser-Triggered Photocathode”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-18, pp. 344-346.
- Y. Cai, “Analysis of Beam Dynamics in a Circular Higgs Factory”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper FRT1B1, pp. 67-72.
- D. L. Schrage, E. Swensen, and B. Rusnak, “Static and Dynamic Analysis of Superconducting Cavities for a High Performance Proton Linac”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F17, pp. 629-633.
- Z. X. Liang, C. C. Han, K. Li, W. G. Li, and W. S. Qian, “Experimental Study of Long Coupled-Helix Resonator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2894-2897.
- E. Calvo Giraldo et al., “The LHC Beam Position System: Performance during 2010 and Outlook for 2011”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD12, pp. 323-325.
- X. Yang, V. V. Smaluk, Y. Tian, and L. Yu, “First Demonstration of the Transparent Fast-to-slow Corrector Current Shift in the NSLS-II Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1323-1326.
- J. K. Hao et al., “Recent Researches on RF Superconductivity in Peking University”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper TL022, pp. XX-XX.
- I. Hofmann, A. Orzhekhovskaya, S. Yaramyshev, I. Alber, K. Harres, and M. Roth, “Laser Accelerated Ions and Their Potential Use for Therapy Accelerators”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper FR-06, pp. 213-217.
- Y. Tanaka et al., “Study for Evaluation of Undulator Magnetic Field Using Vibrating Wire Method”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPB16, pp. 413-416.
- B. Salvant et al., “Building the Impedance Model of a Real Machine”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2249-2254.
- S. Schreiber, J. H. Han, S. Lederer, P. M. Michelato, L. Monaco, and D. Sertore, “Cathode Issues at the FLASH Photoinjector”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper FRAAU05, pp. 552-555.
- M. A. Fraser et al., “Experimental Results of Crystal-Assisted Slow Extraction at the SPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 623-626.
- S. Jolly, M. J. Easton, A. P. Letchford, and J. K. Pozimski, “Integrated Design Method and Beam Dynamics Simulations for the FETS Radio Frequency Quadrupole”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC076, pp. 645-647.
- C. R. Prior, “H- Injection Studies for the Fermilab Proton Driver”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH036, pp. 3305-3307.
- J. Bosser et al., “Single Bunch Profile Measurement Using Synchrotron Light from an Undulator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2164-2167.
- R. A. Kishek et al., “The University of Maryland Electron Ring (UMER) Enters a New Regime of High-Tune-Shift Rings”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUZBAB03, pp. 820-824.
- J. Teichert et al., “First Operation Results of the Superconducting Photoinjector at ELBE”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP105, pp. 2755-2757.
- A. Drago et al., “Mitigation and Control of Instabilities in DANE Positron Ring”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUPG001, pp. 136-138.
- D. Mancini et al., “Active Optics Control of the VST Telescope with the CAN Field-Bus”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP057, pp. XX-XX.
- C. R. Prior, “Recommendations from the International Scoping Study for a Neutrino Factory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUXKI02, pp. 681-685.
- W. Fischer, T. Satogata, and R. Tomas, “Measurement of Transverse Echoes in RHIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT027, pp. 1955-1957.
- C. K. Baribeau, D. Bertwistle, E. J. Ericson, J. T. Gilbert, and T. M. Pedersen, “Magnetic Measurements of Insertion Devices Using the Vibrating Wire Technique”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1683-1686.
- M. Chen et al., “Field Measurements of the ESR Magnets”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1142-1145.
- M. Tomizawa et al., “Status and Upgrade Plan of Slow Extraction from the J-PARC Main Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB014, pp. 3912-3914.
- D. P. Jin et al., “EXPERIMENTAL BACKGROUND STUDY IN THE BEPCII/BESIII”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH08, pp. XX-XX.
- R. Garoby, “Upgrade Issues for the CERN Accelerator Complex”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper FRYAGM01, pp. 3734-3738.
- P. Briand et al., “Production of High Current-High Charge States Ion Beams with the Superconducting ECR Ion Source SERSE”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUO01B, pp. 287-289.
- D. Widegren, T. Ladzinski, R. Lyzwa, S. Mallon Amerigo, S. Petit, and B. Rousseau, “Micado - The Data Import Engine of the CERN Engineering and Equipment Data Management System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC131, pp. 1377-1379.
- L.Calabretta, “LNS CATANIA PROJECT FOR THERAPY AND?RADIOISOTOPE PRODUCTION”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18C1, pp. XX-XX.
- F. Herfurth et al., “The HITRAP Decelerator Linac at GSI”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE4PBC05, pp. 1961-1963.
- J. Urakawa et al., “Development of a Multibunch Photo-cathode RF Gun System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT061, pp. 2628-2630.
- E. Vogel et al., “SRF Gun Development at DESY”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 105-108.
- H. T. Edwards et al., “Construction of a 3.9 GHz Superconducting RF Cavity Module at Fermilab”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP058, pp. 957-959.
- C. G. Pang et al., “First Tests of Superkekb Fast Luminosity Monitors During 2018 Phase-2 Commissioning”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2254-2257.
- Y. Zhang, X. C. Kang, M. Li, J. X. Wu, and G. Zhu, “Design of Cold Beam Position Monitor for CADS Injector II Proton LINAC”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC13, pp. 75-77.
- S. Aumon et al., “Beam Instabilities Studies at Transition Crossing in the CERN Proton Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP050, pp. 4649-4651.
- D. Sertore, P. Michelato, L. Monaco, and C. Pagani, “R&D Activity on Alkali-Antimonied Photocathodes at INFN-Lasa”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4284-4286.
- V. V. Zvoda et al., “Advanced Bent Crystal Collimation Studies at the Tevatron (T-980)”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOODN3, pp. 73-75.
- T. Birke et al., “Status of the Control System for the Energy Recovery Linac bERLinPro at HZB”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1676.
Back to search