Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Martinez-Reviriego et al., “Dielectric Assist Accelerating structures for compact linear accelerators of low energy particles in hadrontherapy treatments”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2947-2950. doi:10.18429/JACoW-IPAC2023-WEPA122
[n] S. Kahn et al., “Field Quality Aspects of CBA Superconducting Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3469-3472.
[n] M. S. Beck et al., “Studies of Horizontal Instabilities in the CERN SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3032-3035. doi:10.18429/JACoW-IPAC2018-THPAF034
[n] S. K. Mukherjee et al., “Mechanical Design of the Prototype H- Ion Source for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA14, pp. 1914-1916.
[n] V. E. Scarpine, B. J. Fellenz, A. Semenov, and D. Slimmer, “A Schottky Tune Meter for the Fermilab Mu2E Delivery Ring”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 425-427. doi:10.18429/JACoW-IBIC2023-WEP033
[n] T. Ludwig et al., “Measurement of H2 Stripping Cross Sections in Carbon and Aluminium Foils (with some additional data for AL203)”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1352-1355.
[n] N. Ouchi et al., “Cold Test of 600 MHz Superconducting Cryomodule for High Intensity Proton Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU474, pp. 488-490.
[n] M. Hara, S. H. Be, H. Kamitsubo, R. Nagaoka, S. Sasaki, and T. Wada, “Storage Ring Design for STA SR Project”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 476-479.
[n] G. Hemmie and J. R. Maidment, “DESY III, The New Proton Injector for HERA”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 172-175.
[n] V. P. Nagaslaev, J. F. Amundson, J. A. Johnstone, C. S. Park, and S. J. Werkema, “Third Integer Resonance Slow Extraction Using RFKO at High Space Charge.”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS058, pp. 3559-3561.
[n] H. F. Ouyang et al., “Construction of a High-Current RFQ for ADS Study”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP053, pp. 165-167.
[n] A. Makhankov et al., “An Accelerator-based Thermal Neutron Source for BNCT Application”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT111, pp. 2745-2747.
[n] M. Buehler, M. A. Tartaglia, J. C. Tompkins, and C. R. Orozco, “Mu2e Magnetic Measurements”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2719-2721. doi:10.18429/JACoW-IPAC2014-WEPRI096
[n] T. Batten, “Invitation to IBIC2023”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper THCI1, unpublished.
[n] D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT037, pp. 2476-2478.
[n] B. Rachmilowitz et al., “Large-area atomic layer deposition of titanium nitride for RF windows”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB094, unpublished.
[n] T. C. Fan, C. H. Chang, M. H. Huang, C. S. Hwang, and F. Y. Lin, “Magnetic Field Measurement on Superconducting Multipole Wiggler with Narrow Duct”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG016, pp. 1047-1049.
[n] N. V. Avreline and S. M. Polozov, “The Tuning of the Accelarating Structure Utilizing Electrostatic Undulator”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 404-406. doi:10.18429/JACoW-RUPAC2018-THPSC03
[n] M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501.
[n] P. Adamson et al., “Operational Performance of a Bunch by Bunch Digital Damper in the Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP015, pp. 1440-1442.
[n] J. J. Li, Y. X. Qiu, L. Liao, K. Zhou, L. Hu, and J. Zhuang, “The Information System of Proton Beam in CSNS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA087, pp. XX-XX.
[n] M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 80-83. doi:10.18429/JACoW-PCAPAC2016-THDAPLCO01
[n] R. Schnuerer, C. P. Welsch, J. S. L. Yap, H. D. Zhang, O. Girard, and G. J. Haefeli, “Implementation of a Non-Invasive Online Beam Monitor at a 60 MeV Proton Therapy Beamline”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 449-452. doi:10.18429/JACoW-IPAC2018-MOPML024
For LaTeX
Use Complete Form
For BibTeX
References
- P. Martinez-Reviriego et al., “Dielectric Assist Accelerating structures for compact linear accelerators of low energy particles in hadrontherapy treatments”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA122, pp. 2947-2950.
- S. Kahn et al., “Field Quality Aspects of CBA Superconducting Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3469-3472.
- M. S. Beck et al., “Studies of Horizontal Instabilities in the CERN SPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3032-3035.
- S. K. Mukherjee et al., “Mechanical Design of the Prototype H- Ion Source for the Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA14, pp. 1914-1916.
- V. E. Scarpine, B. J. Fellenz, A. Semenov, and D. Slimmer, “A Schottky Tune Meter for the Fermilab Mu2E Delivery Ring”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP033, pp. 425-427.
- T. Ludwig et al., “Measurement of H2 Stripping Cross Sections in Carbon and Aluminium Foils (with some additional data for AL203)”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1352-1355.
- N. Ouchi et al., “Cold Test of 600 MHz Superconducting Cryomodule for High Intensity Proton Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU474, pp. 488-490.
- M. Hara, S. H. Be, H. Kamitsubo, R. Nagaoka, S. Sasaki, and T. Wada, “Storage Ring Design for STA SR Project”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 476-479.
- G. Hemmie and J. R. Maidment, “DESY III, The New Proton Injector for HERA”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 172-175.
- V. P. Nagaslaev, J. F. Amundson, J. A. Johnstone, C. S. Park, and S. J. Werkema, “Third Integer Resonance Slow Extraction Using RFKO at High Space Charge.”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS058, pp. 3559-3561.
- H. F. Ouyang et al., “Construction of a High-Current RFQ for ADS Study”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP053, pp. 165-167.
- A. Makhankov et al., “An Accelerator-based Thermal Neutron Source for BNCT Application”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT111, pp. 2745-2747.
- M. Buehler, M. A. Tartaglia, J. C. Tompkins, and C. R. Orozco, “Mu2e Magnetic Measurements”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2719-2721.
- T. Batten, “Invitation to IBIC2023”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper THCI1, unpublished.
- D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT037, pp. 2476-2478.
- B. Rachmilowitz et al., “Large-area atomic layer deposition of titanium nitride for RF windows”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB094, this conference.
- T. C. Fan, C. H. Chang, M. H. Huang, C. S. Hwang, and F. Y. Lin, “Magnetic Field Measurement on Superconducting Multipole Wiggler with Narrow Duct”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG016, pp. 1047-1049.
- N. V. Avreline and S. M. Polozov, “The Tuning of the Accelarating Structure Utilizing Electrostatic Undulator”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 404-406.
- M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501.
- P. Adamson et al., “Operational Performance of a Bunch by Bunch Digital Damper in the Fermilab Main Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP015, pp. 1440-1442.
- J. J. Li, Y. X. Qiu, L. Liao, K. Zhou, L. Hu, and J. Zhuang, “The Information System of Proton Beam in CSNS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA087, pp. XX-XX.
- M. Broseta et al., “Embedded Control System for Programmable Multi-Purpose Instruments”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 80-83.
- R. Schnuerer, C. P. Welsch, J. S. L. Yap, H. D. Zhang, O. Girard, and G. J. Haefeli, “Implementation of a Non-Invasive Online Beam Monitor at a 60 MeV Proton Therapy Beamline”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 449-452.
Back to search