Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Schempp et al., “Deceleration of Antiprotons with a RFQ”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3041-3044.
[n] M. Sapinski et al., “Measurements of the GSI Transfer Beam Lines Ion Optics”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 131-134. doi:10.18429/JACoW-IPAC2019-MOPGW024
[n] D. T. Touchard et al., “The Spiral2 Command Control Software Organisation and Management.”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP014, pp. 703-705.
[n] S. Khan and T. Knuth, “Performance of Bunch-by-Bunch Feedback Systems at BESSY-II”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH087, pp. 1871-1873.
[n] J. Choi, T. Lee, K. Nam, and M. Yoon, “Magnet Lattice of the Pohang Light Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2673-2676.
[n] M. Dracos, “The European Spallation Source Neutrino Super Beam Design Study”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1702-1705. doi:10.18429/JACoW-IPAC2018-TUPML068
[n] J.-C. Gayde et al., “The potential contribution of a structured laser beam to accelerator alignment technology”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4044-4046. doi:10.18429/JACoW-IPAC2023-THPA041
[n] J. D. Purcell, J. Galambos, and J. Patton, “Initial Experience with Database Applications”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE113, pp. XX-XX.
[n] P. Ausset et al., “Operation of the Beam Position Monitor for the Spiral 2 Linac on the Test Bench of the RFQ”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 642-645. doi:10.18429/JACoW-IBIC2016-WEPG11
[n] G. Marcus et al., “X-ray Regenerative Amplifier Free-Electron Laser Concepts for LCLS-II”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 192-195. doi:10.18429/JACoW-FEL2017-MOP061
[n] D. R. Walters et al., “Vacuum and Beam Diagnostics for the Linac Coherent Light Source (LCLS) Undulator System”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH089, pp. 455-458.
[n] I. Hsu, C.-C. Chu, and C. I. Yu, “Turn by Turn Beam Profile Monitor by Utilizing the Non-linearity of the Photo-detector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1649-1652.
[n] S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583.
[n] C. Yao, N. P. Di Monte, A. J. Scaminaci, and H. Shang, “Application of Z-transform to Noise Response Modeling of a Bunch-by-bunch Feedback System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME056, pp. 3058-3060.
[n] D. Schulte et al., “CLIC Energy Scans”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE022, pp. 3395-3397.
[n] R. Steiner, C. Riedel, and W. Rösch, “Realtime Aspects of Pulse-to-Pulse Modulation”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 345-348. doi:10.18429/JACoW-ICALEPCS1991-S10TS01
[n] D. C. Plostinar, R. Enparantza, and M. Larrañaga, “Design Optimisation of the Re-bunching Cavities for the Front End Test Stand at RAL”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP080, pp. 238-240.
[n] Q. Xia, L. Zheng, and Y. Du, “Experimental design for validating the feasibility of in-situ plasma cleaning of normal conducting copper cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3901-3903. doi:10.18429/JACoW-IPAC2024-THPS66
[n] O. Rey Orozko, E. Bargall??, A. Nordt, A. Apollonio, and R. Schmidt, “Reliability and Availability Modeling for Accelerator Driven Facilities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3803-3806. doi:10.18429/JACoW-IPAC2014-THPRI019
[n] O. Kamalou, F. Chautard, and A. Savalle, “Stable and Exotic Beams Produced at GANIL”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 398-400. doi:10.18429/JACoW-Cyclotrons2016-FRB02
[n] F. Yaman, O. Boine-Frankenheim, E. Gjonaj, T. Weiland, and G. Rumolo, “Energy Loss and Longitudinal Wakefield of Relativistic Short Ion Bunches in Electron Clouds”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC094, pp. 2229-2231.
[n] D. T. Touchard et al., “The Spiral2 Radiofrequency Command Control”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN016, pp. 274-276.
[n] A. Romanov, J. Santucci, and G. Stancari, “Experimental 4D tracking of a single electron in IOTA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3359-3362. doi:10.18429/JACoW-IPAC2023-WEPL108
[n] L. Zwalinski et al., “ATLAS Baby-DEMO CO2 Cooling Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA171, pp. XX-XX.
[n] D. Trbojevic et al., “Alignment and Survey of the Elements in RHIC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA09, pp. 2099-2101.
[n] M. G. Mazarakis et al., “'Smile'' a New Version for the RADLAC II Linear Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU448, pp. 438-440.
[n] K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. Kedzie, and M. P. Kelly, “Superconducting Triple-Spoke Cavity for Beta = 0.5 Ions”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT100, pp. 4344-4337.
[n] J. L. Vomvoridis, “A Classical Electron-Cyclotron Maser with Axial Electron Beam Injection”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3124-3127.
[n] R. H. Miller, H. Deruyter, W. R. Fowkes, J. M. Potter, R. G. Schonberg, and J. N. Weaver, “RF Phase Focusing in Portable X-Band Linear Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3231-3234.
[n] S. Kim et al., “O-Arm Mounted X-Band Linear Accelerator System for Radiotherapy”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 142-144. doi:10.18429/JACoW-LINAC2018-MOPO064
[n] M. Castiglioni, L. Manes, B. Weckermann, and M. Bonardi, “Status Report of the Ispra Cyclotron Laboratory (MACY)”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-10, pp. 602-604.
[n] Y. Jongen and G. Ryckewaert, “The Louvain-la-Neuve Injector Cyclotron Project”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-09, pp. 618-621.
[n] Y. Li, P. Liu, S. Chen, X. Guo, and Y. Liu, “Design and testing of high stability power supply for high energy photon source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3729-3731. doi:10.18429/JACoW-IPAC2024-THPS04
For LaTeX
Use Complete Form
For BibTeX
References
- A. Schempp et al., “Deceleration of Antiprotons with a RFQ”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3041-3044.
- M. Sapinski et al., “Measurements of the GSI Transfer Beam Lines Ion Optics”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 131-134.
- D. T. Touchard et al., “The Spiral2 Command Control Software Organisation and Management.”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP014, pp. 703-705.
- S. Khan and T. Knuth, “Performance of Bunch-by-Bunch Feedback Systems at BESSY-II”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH087, pp. 1871-1873.
- J. Choi, T. Lee, K. Nam, and M. Yoon, “Magnet Lattice of the Pohang Light Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2673-2676.
- M. Dracos, “The European Spallation Source Neutrino Super Beam Design Study”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1702-1705.
- J.-C. Gayde et al., “The potential contribution of a structured laser beam to accelerator alignment technology”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA041, pp. 4044-4046.
- J. D. Purcell, J. Galambos, and J. Patton, “Initial Experience with Database Applications”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE113, pp. XX-XX.
- P. Ausset et al., “Operation of the Beam Position Monitor for the Spiral 2 Linac on the Test Bench of the RFQ”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 642-645.
- G. Marcus et al., “X-ray Regenerative Amplifier Free-Electron Laser Concepts for LCLS-II”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 192-195.
- D. R. Walters et al., “Vacuum and Beam Diagnostics for the Linac Coherent Light Source (LCLS) Undulator System”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH089, pp. 455-458.
- I. Hsu, C.-C. Chu, and C. I. Yu, “Turn by Turn Beam Profile Monitor by Utilizing the Non-linearity of the Photo-detector”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1649-1652.
- S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583.
- C. Yao, N. P. Di Monte, A. J. Scaminaci, and H. Shang, “Application of Z-transform to Noise Response Modeling of a Bunch-by-bunch Feedback System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME056, pp. 3058-3060.
- D. Schulte et al., “CLIC Energy Scans”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE022, pp. 3395-3397.
- R. Steiner, C. Riedel, and W. Rösch, “Realtime Aspects of Pulse-to-Pulse Modulation”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S10TS01, pp. 345-348.
- D. C. Plostinar, R. Enparantza, and M. Larrañaga, “Design Optimisation of the Re-bunching Cavities for the Front End Test Stand at RAL”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP080, pp. 238-240.
- Q. Xia, L. Zheng, and Y. Du, “Experimental design for validating the feasibility of in-situ plasma cleaning of normal conducting copper cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS66, pp. 3901-3903.
- O. Rey Orozko, E. Bargall??, A. Nordt, A. Apollonio, and R. Schmidt, “Reliability and Availability Modeling for Accelerator Driven Facilities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3803-3806.
- O. Kamalou, F. Chautard, and A. Savalle, “Stable and Exotic Beams Produced at GANIL”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 398-400.
- F. Yaman, O. Boine-Frankenheim, E. Gjonaj, T. Weiland, and G. Rumolo, “Energy Loss and Longitudinal Wakefield of Relativistic Short Ion Bunches in Electron Clouds”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC094, pp. 2229-2231.
- D. T. Touchard et al., “The Spiral2 Radiofrequency Command Control”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN016, pp. 274-276.
- A. Romanov, J. Santucci, and G. Stancari, “Experimental 4D tracking of a single electron in IOTA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL108, pp. 3359-3362.
- L. Zwalinski et al., “ATLAS Baby-DEMO CO2 Cooling Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA171, pp. XX-XX.
- D. Trbojevic et al., “Alignment and Survey of the Elements in RHIC”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA09, pp. 2099-2101.
- M. G. Mazarakis et al., “'Smile'' a New Version for the RADLAC II Linear Accelerator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU448, pp. 438-440.
- K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. Kedzie, and M. P. Kelly, “Superconducting Triple-Spoke Cavity for Beta = 0.5 Ions”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT100, pp. 4344-4337.
- J. L. Vomvoridis, “A Classical Electron-Cyclotron Maser with Axial Electron Beam Injection”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3124-3127.
- R. H. Miller, H. Deruyter, W. R. Fowkes, J. M. Potter, R. G. Schonberg, and J. N. Weaver, “RF Phase Focusing in Portable X-Band Linear Accelerators”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3231-3234.
- S. Kim et al., “O-Arm Mounted X-Band Linear Accelerator System for Radiotherapy”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 142-144.
- M. Castiglioni, L. Manes, B. Weckermann, and M. Bonardi, “Status Report of the Ispra Cyclotron Laboratory (MACY)”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper J-10, pp. 602-604.
- Y. Jongen and G. Ryckewaert, “The Louvain-la-Neuve Injector Cyclotron Project”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-09, pp. 618-621.
- Y. Li, P. Liu, S. Chen, X. Guo, and Y. Liu, “Design and testing of high stability power supply for high energy photon source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS04, pp. 3729-3731.
Back to search