Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “Theoretical Investigation of Coherent Synchrotron Radiation Induced Microbunching Instability in Transport and Recirculation Arcs”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP022, pp. 730-734.
[n] N. Akasaka et al., “Fundamental Mode Characteristics of ARES Cavity Under Beam Environment”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P030, pp. 2974-2976.
[n] M. A. Fraser et al., “SPS Slow Extraction Losses and Activation: Update on Recent Improvements”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2391-2394. doi:10.18429/JACoW-IPAC2019-WEPMP031
[n] P. Beller, K. Beckert, A. Dolinskii, B. Franzke, F. Nolden, and M. Steck, “Layout of a New Experimental Storage Ring NESR at GSI”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE077, pp. 545-547.
[n] F. E. Eints et al., “Control Path of Longitudinal Multibunch-feedback System at HERA-p”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH084, pp. 2982-2984.
[n] K. Jensen, D. W. Feldman, N. A. Moody, P. G. O, J. L. Shaw, and J. E. Yater, “The Development and Application of a Photoemission Model for Cesiated Photocathode Surfaces”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH068, pp. 744-747.
[n] P. Ch. Chochula et al., “Challenges of the ALICE Detector Control System for the LHC RUN3”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 323-327. doi:10.18429/JACoW-ICALEPCS2017-TUMPL09
[n] R. L. Madrak, V. S. Kashikhin, A. V. Makarov, and D. Wildman, “Perpendicularly Biased YIG Tuners for the Fermilab Recycler 52.809 MHz RF Cavities”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA14, pp. 1013-1015.
[n] T. Suwada, K. Furukawa, and F. Miyahara, “Development of FPBA-Based TDC With Wide Dynamic Range for Monitoring the Trigger Timing Distribution System at the KEKB Injector Linac”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 70-74. doi:10.18429/JACoW-IBIC2015-MOPB017
[n] B. Copy, H. Milcent, and M. Z. Zimny, “Standards-Based Open-Source PLC Diagnostics Monitoring”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1151-1154. doi:10.18429/JACoW-ICALEPCS2015-THHD3O05
[n] T. Lefevre et al., “Instrumentation for Longitudinal Beam Gymnastics in FEL's and in the CLIC test facility 3”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEO1A03, pp. 215-217.
[n] S. Xu, G. Liu, Y. Song, and X. K. Sun, “Control System Design for Front End Devices of IRFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4920-4922. doi:10.18429/JACoW-IPAC2018-THPML109
[n] X. H. Chen and K.-U. Kasemir, “BOY, A Modern Graphical Operator Interface Editor and Runtime”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOBN3, pp. 1404-1406.
[n] G. Valentino, R. Bruce, S. Redaelli, R. Rossi, P. Theodoropoulos, and S. Jaster-Merz, “Anomaly Detection for Beam Loss Maps in the Large Hadron Collider”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 92-95. doi:10.18429/JACoW-IPAC2017-MOPAB010
[n] A. M. Porcellato et al., “Improved on line performance of the installed ALPI Nb sputtered QWRs”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper FR-03, pp. 203-207.
[n] S. G. Arutunian, G. Decker, M. R. Mailian, and G. Rosenbaum, “Transition Thermal Processes In Vibrating Wire Monitors”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB26, pp. 292-294.
[n] S. Ramberger and M. R. Khalvati, “The DTL Post Coupler - An Ingenious Invention Turns 50”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 547-550. doi:10.18429/JACoW-LINAC2016-TUPLR038
[n] G. Tranquille, “Electron Cooling of Pb54+ Ions in LEIR”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-05, pp. 294-298.
[n] C. Zhang et al., “Front-End Linac Design and Beam Dynamics Simulations for MYRRHA”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB005, pp. 849-851.
[n] M. Vadai, A. Alomainy, and H. Damerau, “Barrier Bucket Studies in the CERN PS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1128-1131. doi:10.18429/JACoW-IPAC2019-MOPTS106
[n] E. Lopez Sola et al., “Beam Dump Facility Target: Design Status and Beam Tests in 2018”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2604-2607. doi:10.18429/JACoW-IPAC2018-WEPMG002
[n] S. Yamaguchi, A. Enomoto, and Y. Igarashi, “Analysis of High-Gradient Tests on the Accelerating Structures for the KEKB Injector Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16020, pp. XX-XX.
[n] D. B. Belohrad, S. Longo, OP. Odier, and S. Thoulet, “Mechanical Design of the Intensity Measurement Devices for the LHC”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB09, pp. 253-255.
[n] X. R. Resende and P. F. Tavares, “Estimation of Transverse Coupling From Pinhole Images”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH004, pp. 1921-1923.
[n] M. Sapinski et al., “Upgrade of GSI HADES Beamline in Preparation for High Intensity Runs”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2214-2216. doi:10.18429/JACoW-IPAC2017-TUPVA060
[n] R. Cooper, K. Chan, L. Thode, and T. Wang, “Transverse Effects of a Waveguide Coupling Slot”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-05, pp. 315-317.
[n] M. W. Reinsch et al., “System Trade Analysis for an FEL Facility”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPB32, pp. 89-91.
[n] C. Yin Vallgren et al., “Low Secondary Electron Yield Carbon Coatings for Electron-cloud Mitigation in Modern Particle Accelerators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEOAMH03, pp. 2375-2377.
[n] W. Zhang et al., “Design, Development, and Construction of SNS Extraction Fast Kicker System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC006, pp. 550-552.
[n] B. Durickovic et al., “RF Cavity Phase Calibration using Electromagnetic Pickups”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO14, pp. 1334-1336.
[n] M. Huening, “On using NEA Cathodes in an RF Gun”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT111, pp. 797-799.
[n] M. Goldstein et al., “FEL Applications in EUV Lithography”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOA002, pp. XX-XX.
[n] M. Tomizawa et al., “Slow Beam Extraction TARN-II”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1488-1491.
[n] J.-L. Vay, C. M. Celata, M. A. Furman, D. P. Grote, K. G. Sonnad, and M. Venturini, “Update on Electron-Cloud Simulations Using the Package WARP-POSINST”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP078, pp. 4719-4721.
[n] A. G. Afonin et al., “Application of Bent Crystals at IHEP 70-GeV Accelerator to Enhance the Efficiency of its Usage”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A11, pp. 364-366.
[n] G. Iadarola, B. Bradu, P. Dijkstal, L. Mether, and G. Rumolo, “Impact and Mitigation of Electron Cloud Effects in the Operation of the Large Hadron Collider”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2085-2088. doi:10.18429/JACoW-IPAC2017-TUPVA019
[n] T. Raubenheimer et al., “Collective Effects in the NLC Damping Ring Designs”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ16, pp. 2986-2988.
[n] T. Olsson, S. C. Leemann, and P. Lilja, “Bunch Length Measurements with Passive Harmonic Cavities for Uniform Fill Patterns in a 100 MHz RF System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2914-2917. doi:10.18429/JACoW-IPAC2016-WEPOW036
[n] T. Olsson, ?à. Andersson, and D. K. Olsson, “Pulse-Picking by Resonant Excitation (PPRE) for Timing Users at the MAX IV 3 GeV Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4300-4303. doi:10.18429/JACoW-IPAC2018-THPMK004
[n] M. Paciotti et al., “Pion Beam Development for the LAMPF Biomedical Project”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3071-3074.
[n] S. I. Tomin et al., “Progress in Automatic Software-based Optimization of Accelerator Performance”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3064-3066. doi:10.18429/JACoW-IPAC2016-WEPOY036
[n] Y. W. An and S. Wang, “The Study on Measuring Beta Functions and Phase Advances in the CSNS/RCS”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP215, pp. 85-88.
[n] W. Ma et al., “Design and Simulation of a High Intensity Heavy Ion RFQ Accelerator Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 999-1001. doi:10.18429/JACoW-LINAC2016-THPLR064
[n] N. Huang et al., “An Improved Lattice for BTCF Storage Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D017, pp. 423-425.
[n] J. R. Piton, M. P. Donadio, D. O. Omitto, and M. A. Raulik, “A Status Update on Hyppie ÔÇô a Hyppervisored PXI for Physics Instrumentation under EPICS”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC036, pp. 635-637.
[n] G. Romagnoli et al., “Design of the New PS Internal Dumps, in the Framework of the LHC Injector Upgrade (LIU) Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3521-3523. doi:10.18429/JACoW-IPAC2017-WEPVA109
[n] M. T. F. Pivi et al., “Status of the Carbon Commissioning and Roadmap Projects of the MedAustron Ion Therapy Center Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3404-3407. doi:10.18429/JACoW-IPAC2019-THXXPLS1
[n] P.-A. Duperrex, P. Baumann, S. Joray, D. C. Kiselev, Y. Lee, and U. M??ller, “Design and Operation of a Current Monitor under Heavy Heat Load”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD20, pp. 336-338.
[n] I. N. Okunev, A. Bogomyagkov, E. B. Levichev, P. A. Piminov, S. V. Sinyatkin, and P. Vobly, “Final Focus for the Crab-waist Tau-charm Factory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP046, pp. 2623-2625.
[n] A. T. Wu et al., “Surface Treatments of Nb by Buffered Electropolishing”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO064, pp. 755-759.
[n] R. R. Lindberg, “Controlling Transient Collective Instabilities During Swap-Out Injection”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 110-112. doi:10.18429/JACoW-NAPAC2019-MOPLM08
[n] E. D. van Garderen et al., “Characterisation of the Systematic Effects of the Insertion Devices with Photon Beam Position Monitors”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB26, pp. 126-128.
For LaTeX
Use Complete Form
For BibTeX
References
- C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “Theoretical Investigation of Coherent Synchrotron Radiation Induced Microbunching Instability in Transport and Recirculation Arcs”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP022, pp. 730-734.
- N. Akasaka et al., “Fundamental Mode Characteristics of ARES Cavity Under Beam Environment”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P030, pp. 2974-2976.
- M. A. Fraser et al., “SPS Slow Extraction Losses and Activation: Update on Recent Improvements”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2391-2394.
- P. Beller, K. Beckert, A. Dolinskii, B. Franzke, F. Nolden, and M. Steck, “Layout of a New Experimental Storage Ring NESR at GSI”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE077, pp. 545-547.
- F. E. Eints et al., “Control Path of Longitudinal Multibunch-feedback System at HERA-p”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH084, pp. 2982-2984.
- K. Jensen, D. W. Feldman, N. A. Moody, P. G. O, J. L. Shaw, and J. E. Yater, “The Development and Application of a Photoemission Model for Cesiated Photocathode Surfaces”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH068, pp. 744-747.
- P. Ch. Chochula et al., “Challenges of the ALICE Detector Control System for the LHC RUN3”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 323-327.
- R. L. Madrak, V. S. Kashikhin, A. V. Makarov, and D. Wildman, “Perpendicularly Biased YIG Tuners for the Fermilab Recycler 52.809 MHz RF Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA14, pp. 1013-1015.
- T. Suwada, K. Furukawa, and F. Miyahara, “Development of FPBA-Based TDC With Wide Dynamic Range for Monitoring the Trigger Timing Distribution System at the KEKB Injector Linac”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 70-74.
- B. Copy, H. Milcent, and M. Z. Zimny, “Standards-Based Open-Source PLC Diagnostics Monitoring”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1151-1154.
- T. Lefevre et al., “Instrumentation for Longitudinal Beam Gymnastics in FEL's and in the CLIC test facility 3”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEO1A03, pp. 215-217.
- S. Xu, G. Liu, Y. Song, and X. K. Sun, “Control System Design for Front End Devices of IRFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4920-4922.
- X. H. Chen and K.-U. Kasemir, “BOY, A Modern Graphical Operator Interface Editor and Runtime”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOBN3, pp. 1404-1406.
- G. Valentino, R. Bruce, S. Redaelli, R. Rossi, P. Theodoropoulos, and S. Jaster-Merz, “Anomaly Detection for Beam Loss Maps in the Large Hadron Collider”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 92-95.
- A. M. Porcellato et al., “Improved on line performance of the installed ALPI Nb sputtered QWRs”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper FR-03, pp. 203-207.
- S. G. Arutunian, G. Decker, M. R. Mailian, and G. Rosenbaum, “Transition Thermal Processes In Vibrating Wire Monitors”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB26, pp. 292-294.
- S. Ramberger and M. R. Khalvati, “The DTL Post Coupler - An Ingenious Invention Turns 50”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 547-550.
- G. Tranquille, “Electron Cooling of Pb54+ Ions in LEIR”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper D-05, pp. 294-298.
- C. Zhang et al., “Front-End Linac Design and Beam Dynamics Simulations for MYRRHA”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB005, pp. 849-851.
- M. Vadai, A. Alomainy, and H. Damerau, “Barrier Bucket Studies in the CERN PS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1128-1131.
- E. Lopez Sola et al., “Beam Dump Facility Target: Design Status and Beam Tests in 2018”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2604-2607.
- S. Yamaguchi, A. Enomoto, and Y. Igarashi, “Analysis of High-Gradient Tests on the Accelerating Structures for the KEKB Injector Linac”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16020, pp. XX-XX.
- D. B. Belohrad, S. Longo, OP. Odier, and S. Thoulet, “Mechanical Design of the Intensity Measurement Devices for the LHC”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB09, pp. 253-255.
- X. R. Resende and P. F. Tavares, “Estimation of Transverse Coupling From Pinhole Images”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH004, pp. 1921-1923.
- M. Sapinski et al., “Upgrade of GSI HADES Beamline in Preparation for High Intensity Runs”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2214-2216.
- R. Cooper, K. Chan, L. Thode, and T. Wang, “Transverse Effects of a Waveguide Coupling Slot”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-05, pp. 315-317.
- M. W. Reinsch et al., “System Trade Analysis for an FEL Facility”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPB32, pp. 89-91.
- C. Yin Vallgren et al., “Low Secondary Electron Yield Carbon Coatings for Electron-cloud Mitigation in Modern Particle Accelerators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEOAMH03, pp. 2375-2377.
- W. Zhang et al., “Design, Development, and Construction of SNS Extraction Fast Kicker System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC006, pp. 550-552.
- B. Durickovic et al., “RF Cavity Phase Calibration using Electromagnetic Pickups”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO14, pp. 1334-1336.
- M. Huening, “On using NEA Cathodes in an RF Gun”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT111, pp. 797-799.
- M. Goldstein et al., “FEL Applications in EUV Lithography”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THOA002, pp. XX-XX.
- M. Tomizawa et al., “Slow Beam Extraction TARN-II”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1488-1491.
- J.-L. Vay, C. M. Celata, M. A. Furman, D. P. Grote, K. G. Sonnad, and M. Venturini, “Update on Electron-Cloud Simulations Using the Package WARP-POSINST”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP078, pp. 4719-4721.
- A. G. Afonin et al., “Application of Bent Crystals at IHEP 70-GeV Accelerator to Enhance the Efficiency of its Usage”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3A11, pp. 364-366.
- G. Iadarola, B. Bradu, P. Dijkstal, L. Mether, and G. Rumolo, “Impact and Mitigation of Electron Cloud Effects in the Operation of the Large Hadron Collider”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2085-2088.
- T. Raubenheimer et al., “Collective Effects in the NLC Damping Ring Designs”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPQ16, pp. 2986-2988.
- T. Olsson, S. C. Leemann, and P. Lilja, “Bunch Length Measurements with Passive Harmonic Cavities for Uniform Fill Patterns in a 100 MHz RF System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2914-2917.
- T. Olsson, ?à. Andersson, and D. K. Olsson, “Pulse-Picking by Resonant Excitation (PPRE) for Timing Users at the MAX IV 3 GeV Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4300-4303.
- M. Paciotti et al., “Pion Beam Development for the LAMPF Biomedical Project”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3071-3074.
- S. I. Tomin et al., “Progress in Automatic Software-based Optimization of Accelerator Performance”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3064-3066.
- Y. W. An and S. Wang, “The Study on Measuring Beta Functions and Phase Advances in the CSNS/RCS”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP215, pp. 85-88.
- W. Ma et al., “Design and Simulation of a High Intensity Heavy Ion RFQ Accelerator Injector”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 999-1001.
- N. Huang et al., “An Improved Lattice for BTCF Storage Ring”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D017, pp. 423-425.
- J. R. Piton, M. P. Donadio, D. O. Omitto, and M. A. Raulik, “A Status Update on Hyppie ÔÇô a Hyppervisored PXI for Physics Instrumentation under EPICS”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC036, pp. 635-637.
- G. Romagnoli et al., “Design of the New PS Internal Dumps, in the Framework of the LHC Injector Upgrade (LIU) Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3521-3523.
- M. T. F. Pivi et al., “Status of the Carbon Commissioning and Roadmap Projects of the MedAustron Ion Therapy Center Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3404-3407.
- P.-A. Duperrex, P. Baumann, S. Joray, D. C. Kiselev, Y. Lee, and U. M??ller, “Design and Operation of a Current Monitor under Heavy Heat Load”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD20, pp. 336-338.
- I. N. Okunev, A. Bogomyagkov, E. B. Levichev, P. A. Piminov, S. V. Sinyatkin, and P. Vobly, “Final Focus for the Crab-waist Tau-charm Factory”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP046, pp. 2623-2625.
- A. T. Wu et al., “Surface Treatments of Nb by Buffered Electropolishing”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO064, pp. 755-759.
- R. R. Lindberg, “Controlling Transient Collective Instabilities During Swap-Out Injection”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 110-112.
- E. D. van Garderen et al., “Characterisation of the Systematic Effects of the Insertion Devices with Photon Beam Position Monitors”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB26, pp. 126-128.
Back to search