JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	T. H. Luo, D. Li, W. Gai, and J. H. Shao, “Field Emission Study of RF cavity in Static Magnetic Field”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3905-3907. doi:10.18429/JACoW-IPAC2014-THPRI059
[n]	D. R. S. Di Calafiori et al., “Improving the Compact Muon Solenoid Electromagnetic Calorimeter Control and Safety Systems for the Large Hadron Collider Run 2”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 117-120. doi:10.18429/JACoW-ICALEPCS2015-MOPGF016
[n]	O. Holme, D. R. S. Di Calafiori, G. Dissertori, L. Djambazov, W. Lustermann, and S. Zelepoukine, “Re-integration and Consolidation of the Detector Control System for the Compact Muon Solenoid Electromagnetic Calorimeter”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC035, pp. 154-157. 
[n]	T. V. Spina et al., “RemoteVis: An Efficient Library for Remote Visualization of Large Volumes Using NVIDIA Index”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 1047-1053. doi:10.18429/JACoW-ICALEPCS2021-FRBL05
[n]	C.-J. Jing et al., “The Two Beam Acceleration Staging Experiment at Argonne Wakefield Accelerator Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2714-2716. doi:10.18429/JACoW-IPAC2015-WEPJE020
[n]	G. Berger, T. Daras, M. Loiselet, N. Postiau, and G. Ryckewaert, “Acceleration and Mass-Separation of Radioactive Ion Beams in an Isochronous Cyclotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2610-2613. 
[n]	D. L. Hall et al., “Cavity Quench Studies in Nb3Sn Using Temperature Mapping and Surface Analysis of Cavity Cut-outs”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 840-843. doi:10.18429/JACoW-SRF2017-THPB041
[n]	T. Plettner et al., “Inverse-Transition Radiation Laser Acceleration Experiments at SLAC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS080, pp. 3172-3174. 
[n]	R. A. Lerche et al., “The NIF Integrated Timing System - Design and Performance”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP069, pp. XX-XX. 
[n]	Y. H. Chin et al., “The Proposed Experimental Study on Beam-Photoelectron Interactions in BEPC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP047G, pp. 1042-1044. 
[n]	K. Sasa, T. Hattori, T. Ito, Y. Oguri, M. Okada, and M. Okamura, “Design of a Transport System after the TIT-RFQ for Beam-Plasma Interaction Experiments”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-92, pp. 582-584. 
[n]	S. V. Milton et al., “The APS SASE FEL: Status and Commissioning Results”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP95, pp. 2483-2485. 
[n]	B. G. Chidley, J. C. Brown, G. E. McMichael, S. O. Schriber, M. R. Shubaly, and J. Ungrin, “Design and Constraints for the ZEBRA Injector, RFQ and DTL”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B06, pp. 49-52. 
[n]	J. Schipper et al., “The Low-Level Control System for the CERN PS Multi-Turn Extraction Kickers”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP065, pp. 528-530. 
[n]	S. J. Pasky et al., “A New SLED Test Stand in the APS Injector Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP003, pp. 806-808. 
[n]	T. Nakamoto, “High Field Magnet Developments”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THYA01, pp. 3185-3189. 
[n]	J. T. Bradley III, D. Rees, A. Scheinker, and R. L. Sheffield, “High Power RF Requirements for Driving Discontinuous Bunch Trains in the MaRIE Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 320-322. doi:10.18429/JACoW-LINAC2016-MOP106016
[n]	C. M. S. Sears et al., “Demonstration of Optical Microbunching and Net Acceleration at 0.8 microns”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXKI02, pp. 1894-1898. 
[n]	J. T. M. Lyles et al., “Results from the Installation of a New 201 MHz RF System at LANSCE”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP107, pp. 303-306. 
[n]	K. C. Wilhelmsen et al., “Automatic Alignment Upgrade of Advanced Radiographic Capability for the National Ignition Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC141, pp. 1384-1387. 
[n]	D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3484-3487. 
[n]	Y. Miyahara, “Analysis of Tranverse Coherant Instability in KEK Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3535-3538. 
[n]	T. Kramer et al., “Feasibility Study of the PS Injection for 2 GeV LIU Beams with an Upgraded KFA-45 Injection Kicker System Operating in Short Circuit Mode”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1363-1366. doi:10.18429/JACoW-IPAC2016-TUPMR049
[n]	S. P. Antipov, R. A. Kostin, S. V. Kuzikov, and V. A. Dolgashev, “High Shunt Impedance Accelerating Structure with Distributed Microwave Coupling”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2531-2533. doi:10.18429/JACoW-IPAC2018-WEPMF069
[n]	M. Bieler, K. Balewski, W. Drube, J. Keil, and A. Kling, “Status of the PETRA III Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP009, pp. 1620-1622. 
[n]	I. Bolotin, V. Budilin, A. Glazov, V. Krasnopolsky, and V. Skuratov, “Ferromagentic Cores Made from Amorphous Material for Broad-Band Accelerating System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR19, pp. 1833-1834. 
[n]	N. Solyak et al., “PXIE at FNAL”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3B03, pp. 414-418. 
[n]	B. Petersen, “Industrialization of Superconducting Accelerator Module Production”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM03, pp. 1964-1966. 
[n]	J. T. M. Lyles et al., “Installation and Operation of Replacement 201 MHz High Power RF System at LANSCE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3485-3488. doi:10.18429/JACoW-IPAC2015-WEPWI002
[n]	P. Mandrillon et al., “Advances of the Feasibility Study of the European Light Ion Medical Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 767-770. 
[n]	A. E. Vlieks et al., “100 MW Klystron Development at SLAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 798-801. 
[n]	Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz TESLA-type SRF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3594-3596. doi:10.18429/JACoW-IPAC2015-WEPWI046
[n]	C. Zannini et al., “Beam-induced heating mitigation of the SPS kickers: a crucial upgrade to move towards HL-LHC beam intensities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3486-3489. doi:10.18429/JACoW-IPAC2023-WEPL157
[n]	L. L. Reginato and B. H. Smith, “Application of the Two-Power-Supply Method to the Ferrite Bias of an RF Resonator of a Rapid-Cycling Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 540-543. 
[n]	K. J. Suthar et al., “Investigation of Various Fabrication Methods to Produce a 180GHz Corrugated Waveguide Structure in 2mm Diameter ?¡0.5m ?¡Long Copper Tube for the Compact Wakefield Accelerator for FEL Facility”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 286-289. doi:10.18429/JACoW-NAPAC2019-MOPLO23
[n]	S. Rodriguez Esparza et al., “Mechanical Design and Evaluation of the MP-11-like Wire Scanner Prototype”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR083, pp. 984-986. 
[n]	V. Petrov et al., “NORMAL CONDUCTING SEPARATION DIPOLES FOR THE LHC BEAM CLEANING INSERTIONS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THLP10, pp. XX-XX. 
[n]	U. R. Ristau, M. DiCastro, P. Duval, S. Fiedler, and A. Pazos, “The Concept of EMBL Beamline Control at Petra III”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOZ02, pp. 22-24. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search