JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. Xie, A. Kanareykin, N. Solyak, and V. P. Yakovlev, “Development of a Quarter-wave Coaxial Coupler for 1.3 GHz Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2675-2677. doi:10.18429/JACoW-IPAC2014-WEPRI078
[n]	M. Carl?á, G. Benedetti, T. F. G. G??nzel, U. Iriso, and Z. Mart?¡, “Local Impedance Measurements at ALBA from Turn-by-Turn Acquisition”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 598-601. doi:10.18429/JACoW-IPAC2016-MOPOR007
[n]	C. S. Yang, C.-H. Chang, Y. L. Chu, T. Y. Chung, C.-S. Hwang, and F.-Y. Lin, “Design and Performance of the TPS DC Septum Magnet”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1301-1303. doi:10.18429/JACoW-IPAC2014-TUPRO108
[n]	Y.-H. Liu et al., “The HV Withstands Test for In Vacuum Booster Kicker”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA043, pp. 765-767. 
[n]	Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz TESLA-type SRF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3594-3596. doi:10.18429/JACoW-IPAC2015-WEPWI046
[n]	P. Songsiriritthigul et al., “Improvement of BPM System for the Siam Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR053, pp. 903-905. 
[n]	F. H. Chao et al., “Room-temperature Burst-mode GHz and THz Pulse-train Photoinjector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1492-1494. doi:10.18429/JACoW-IPAC2014-TUPME055
[n]	T. L. Vardanyan, M. Ivanyan, V. Sahakyan, A. V. Tsakanian, and G. S. Zanyan, “Modal Analysis of Helical Undulator Radiation In Cylindrical Waveguide”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1989-1991. doi:10.18429/JACoW-IPAC2014-WEPRO022
[n]	G.-Y. Hsiung et al., “Progress of the Construction for the TPS Vacuum System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUODB01, pp. 976-978. 
[n]	K. Escherich et al., “Electro Polishing at DESY, A Set Up for Multi-cell Resonator Treatment”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT015, pp. XX-XX. 
[n]	M. Pont, “Operation Status of ALBA Synchrotron Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP023, pp. 1659-1661. 
[n]	B. Grigoryan et al., “Advanced Research Electron Accelerator Laboratory Based on Photocathode RF Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC031, pp. 1066-1068. 
[n]	Y.-H. Liu, J.-C. Chang, C. S. Chen, H. H. Chen, and J.-R. Chen, “Conductive EMI Reduction to Kicker Magnet Power Supply in NSRRC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD059, pp. 3647-3649. 
[n]	L. Yu, Y. F. Sui, J. X. Zhao, and D. C. Zhu, “Design and Application of Double-slit Emittance Meter for C-ADS Proton Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 164-166. doi:10.18429/JACoW-IPAC2016-MOPMB034
[n]	M. Kuriki et al., “High Aspect Ratio Beam Generation with the Phase-space Rotation Technique for Linear Colliders”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 685-687. doi:10.18429/JACoW-LINAC2018-THPO005
[n]	J. W. McKenzie and B. L. Militsyn, “A Velocity Bunching Scheme for Creating Sub-picosecond Electron Bunches from an RF Photocathode Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC132, pp. 3194-3196. 
[n]	R. Gobin, O. Delferriere, F. Harrault, B. Pottin, and O. Tuske, “High Intensity Helium Beam at CEA/Saclay”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-20, pp. 115-115. 
[n]	A. Salom, J. M. Alvarez, B. Bravo, and F. P?®rez, “HOM Damped Normal Conducting 1.5 GHz Cavity Design Evolution for the 3rd Harmonic System of the ALBA Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2948-2951. doi:10.18429/JACoW-IPAC2019-WEPRB060
[n]	A. Sargsyan, V. Sahakyan, G. S. Zanyan, and W. Decking, “New BBA Algorithm for Electron Beam Orbit Steering in Linear Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1650-1652. doi:10.18429/JACoW-IPAC2014-TUPRI040
[n]	J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1243-1246. 
[n]	J. Campmany and M. Traveria, “Pulsed Magnets for Injection and Extraction at LSB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP125G, pp. 2491-2493. 
[n]	P. J. Tipping, J. W. McKenzie, and B. L. Militsyn, “Simulations of Field Emitted Dark Current Dynamics in DC Photoinjectors”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3971-3974. doi:10.18429/JACoW-IPAC2016-THPOW018
[n]	Z. Wang, C. Feng, Q. Gu, Z. T. Zhao, and L. Yu, “Operating Cascaded High-gain Harmonic Generation with Double-pulse Electron Beams”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1661-1664. doi:10.18429/JACoW-IPAC2015-TUPJE019
[n]	J. C. Jan et al., “Magnetic Field Character of TPS Booster Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME037, pp. 3594-3596. 
[n]	Y. T. Huang et al., “Development of a Feedthrough with Small Reflection for the TPS BPM”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS029, pp. 1593-1595. 
[n]	J. A. Clarke et al., “CLARA - A Proposed New FEL Test Facility for the UK”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP066, pp. 1750-1752. 
[n]	C.-C. Chang, C. K. Chan, C. L. Chen, J.-R. Chen, G.-Y. Hsiung, and S-N. Hsu, “Manufacturing and Welding Process of Straight Section of Aluminum Alloy UHV Chambers for Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD019, pp. 2537-2539. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search