JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. P. Moehs et al., “Fermilab Booster Charge As A Function of Linac Intensity”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU429, pp. 374-376. 
[n]	N. Mehrotra et al., “Design Study of Alternate Injector at Pelletron Accelerator Facility”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP034, pp. 3443-3445. 
[n]	Y. Mori et al., “A Preliminary Design of the PS Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 165-168. 
[n]	E. Chiaveri, E. Haebel, E. Mahner, and J. M. Tessier, “The Quadrupole Resonator, Construction, RF System, Field Calculations and First Applications”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP041B, pp. 1852-1854. 
[n]	S. Tuma et al., “Integration of Beam Diagnostics Devices for a Therapy Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3641-3643. doi:10.18429/JACoW-IPAC2014-THPME161
[n]	S. He et al., “Mechanical Study of the First Superconducting Half-wave Resonator for Injector II of CADS Project”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB057, pp. 306-308. 
[n]	Y. B. Yan, Y. Z. Chen, Y. B. Leng, W. M. Zhou, and Y. Zou, “Data Acquisition and Analysis in SSRF BPM System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC015, pp. 1077-1079. 
[n]	W. Bialowons, R. Amirikas, A. Bertolini, and D. Kruecker, “Measurement of Ground Motion in Various Sites”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS064, pp. 691-693. 
[n]	D. L. Bowring et al., “RF Breakdown of 805 MHz Cavities in Strong Magnetic Fields”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 53-56. doi:10.18429/JACoW-IPAC2015-MOAD2
[n]	V. Aleynikov and A. Nikiforov, “QNX Based Software for Control System of FLNR”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_036. 
[n]	R. Krasse, R. Browne, and R. Fullwood, “Practical Operating Problems at the RPI Linac”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 449-457. 
[n]	Yu. Senichev, T. Korsbjerg, S. P. M, and E. Zaplatine, “Solving the Problem of Heating of RF Contacts in Cavity Tuners”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P022, pp. 2923-2925. 
[n]	J.-M. Ortega, J. P. Berthet, F. Glotin, and R. Prazeres, “Study of the CLIO FEL in the Far-infrared in a Partially Guided Mode”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2859-2862. doi:10.18429/JACoW-IPAC2014-THPRO004
[n]	J. Teichert et al., “A Superconducting Photo-Injector with 3+1/2- Cell Cavity for the ELBE Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF015, pp. 333-335. 
[n]	L. Somaschini et al., “Tuner System Simulation and Tests for the 201-MHz MICE Cavity”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3927-3929. doi:10.18429/JACoW-IPAC2014-THPRI070
[n]	F. Osmic et al., “Overview of the Beam Diagnostics in the MedAustron Accelerator: Design Choices and Test Beam Commissioning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR002, pp. 774-776. 
[n]	J. S. Eldred and R. M. Zwaska, “Proposed Cavity for Reduced Slip-Stacking Loss”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 600-603. doi:10.18429/JACoW-IPAC2015-MOPMA026
[n]	M. Hostettler, K. Fuchsberger, and G. Papotti, “Operational Experience with Luminosity Scans for Beam Size Estimation in 2016 LHC Proton Physics Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 374-376. doi:10.18429/JACoW-IPAC2017-MOPAB109
[n]	T. Koeth, “SC Cavities at 3.9 GHz”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA09, pp. 193-193. 
[n]	C. M. Lyneis, M. A. Leitner, D. Wutte, C. E. Taylor, and S. R. Abbott, “VENUS: The Next Generation ECR Ion Source”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper G-1, pp. XX-XX. 
[n]	N. Solyak, H. Edwards, I. Gonin, M. Foley, T. Khabiboulline, and D. Mitchell, “Development of the 3.9 GHz 3rd Harmonic Cavity at FNAL”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP43, pp. 429-431. 
[n]	X. Zhang, W. W. Destler, M. Reiser, C. D. Striffler, and R. L. Yao, “Intense Electron Beam Propagation Across a Magnetic Field”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1035-1038. 
[n]	M. Gusarova, A. Krasnov, M. Lalayan, N. Sobenin, A. Zavadtsev, and D. Zavadtsev, “Input Coupler Development for Superconducting Cavity 500kW CW Power Feed”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA15, pp. 215-217. 
[n]	M. Wenskat et al., “A Cross-Lab Qualification of Modified 120??C Baked Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 90-94. doi:10.18429/JACoW-SRF2019-MOP026
[n]	D. Rajaram and P. Snopok, “Muon Ionization Cooling Experiment Step VI”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI066, pp. 1502-1504. 
[n]	Y. C. Liao, C. Y. Li, X. Liu, B. Qin, W. Wang, and R. X. Zhao, “CSPT: A GPU-Accelerated Lattice Design Toolkit Especially for CCT”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THPO004, pp. 299-302. doi:10.18429/JACoW-CYCLOTRONS2022-THPO004
[n]	J. Brossard, M. Desmons, B. M. Mercier, C. P. Prevost, and R. Roux, “Construction of the Probe Beam Photo-injector of CTF3”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS114, pp. 828-830. 
[n]	N. Tsoupas, H. Enge, and E. Forest, “Calculation of Aberration Coefficients up to Sixth Order of Multipole Focusing Elements”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-52, pp. 442-444. 
[n]	R. P. Johnson et al., “Tunable RF Cavities Using Orthogonally Biased Ferrite”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP018, pp. 849-851. 
[n]	Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624. 
[n]	K. L. Mahoney, I. T. Carlino, K. Kindrew, T. L. Larrieu, T. S. McGuckin, and N. Okay, “Jefferson Lab Personnel Safety Electronic Log RMA”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP046, pp. 188-190. 
[n]	M. L. Mallory, J. B. Ball, D. Dowling, E. D. H. Hudson, R. S. L. Lord, and A. Tatum, “ORIC Beam Energy Increase”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE032, pp. 2257-2259. 
[n]	S. Humphries, J. Petillo, and N. Dionne, “Modeling Secondary Emission in a Finite-Element Multipactor Code”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP008, pp. 390-396. 
[n]	A. N. Ivanov and Y. Senichev, “Matrix Integration of ODEs for Spin-orbit Dynamics Simulation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 400-402. doi:10.18429/JACoW-IPAC2014-MOPME011
[n]	K. Blasche, D. Boehne, B. Franczak, B. Franzke, and C. Riedel, “SIS-A Two Stage Synchrotron Facility for Heavy Ions”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2013-2016. 
[n]	M. Walter et al., “Beam Extraction Concepts and Design for the University of Maryland Electron Ring (UMER)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS048, pp. 1754-1756. 
[n]	D. Calandroni and Y. Hiramoto, “A Simple Beam Chopper for TOF Experiments”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-24, pp. 317-319. 
[n]	A. Drozhdin, Y. Irie, N. Mokhov, N. Nakao, and M. Uota, “Beam Halo Collection for the JHF 3-GeV Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP23G, pp. 2315-2317. 
[n]	C. L. Li, A. M. Kiss, and W. J. Zhang, “Investigation of Continuous Scan Methods for Rapid Data Acquisition”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1243-1245. doi:10.18429/JACoW-IPAC2015-MOPWI036
[n]	R. Tighe, “RF Feedback Simulation for the PEP-II B Facotry”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1957-1960. 
[n]	J. McCarrick, Y.-J. Chen, T. L. Houck, and B. R. Poole, “Trapping Backstreaming Ions from an X-ray Converter Using an Inductive Cell”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4028, pp. 833-835. 
[n]	L. Zeng et al., “The Beam-Based Alignment Simulation and Preliminary Experiment at SXFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1804-1807. doi:10.18429/JACoW-IPAC2019-TUPRB054
[n]	K. H. Chung, B. H. Choi, J. H. Hong, and S. K. Ko, “Development of Pellet Chain for Charge Carrying”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1021-1024. 
[n]	G. Andonian, P. Frigola, S. Reiche, J. B. Rosenzweig, S. Telfer, and G. Travish, “Status of the UCLA PEGASUS Laboratory”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB030, pp. 2110-2111. 
[n]	T. J. Smith, J. C. Frisch, E. M. Kraft, J. Loos, and G. S. Bentsen, “Thermal Acoustic Sensor for High Pulse Energy X-ray FEL Beams”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA02, pp. 334-336. 
[n]	Y. Gao et al., “An Experimental Study of Higher-Order Modes Excited by High Repetition Rate Electron Beam in an SRF Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 965-968. doi:10.18429/JACoW-IPAC2015-MOPTY014
[n]	L. C. Penescu, M. Kronberger, T. Kulenkampff, F. Osmic, P. Ursch??tz, and W. Pirkl, “Commissioning and Operation of the MedAustron Injector: Results and Future Outlook”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3202-3204. doi:10.18429/JACoW-IPAC2014-THPME001
[n]	M. Yu et al., “Fabrication and Test of Short Helical Solenoid Model Based on YBCO Tape”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP153, pp. 1118-1120. 
[n]	E. Wooldridge, “Alternate Cavity Designs to Reduce BBU”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH041, pp. 2874-2876. 
[n]	S. Baek, K. Kim, H. Yonekawa, Y. K. Oh, and Y. Chu, “Relational Database Design for the Test of the KSTAR Superconducting Magnet System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP526, pp. XX-XX. 
[n]	F. Casagrande et al., “Status of the Spallation Neutron Source Superconducting RF Facility”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC125, pp. 1362-1364. 
[n]	Y. F. Yang, H. H. Lu, S. C. Sun, and X. Z. Zhang, “Field Error Correction Considerations of Cryogenic Permanent Magnet Undulator (CPMU) for High Energy Photon Source Test Facility (HEPS-TF)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4038-4040. doi:10.18429/JACoW-IPAC2016-THPOW041
[n]	M. A. Baylac, J.-M. De Conto, E. Froidefond, and E. Zh. Sargsyan, “Error study of LINAC 4”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUBY03, pp. 137-139. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search