Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. G. Morris et al., “RF System for FRIB Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1765-1770. doi:10.18429/JACoW-IPAC2018-WEXGBF3
[n] S. Thielk, R. Agustsson, P. Carriere, and S. Kutsaev, “Evaluation of low-loss alumina material for high-power RF windows”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4373-4376. doi:10.18429/JACoW-IPAC2023-THPA174
[n] H. Harada et al., “Current Status of Virtual Accelerator at J-PARC 3 GeV Rapid Cycling Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN028, pp. 215-217.
[n] T. Mattison, R. Cassel, A. Donaldson, G. Gross, and A. Harvey, “Operational Experience with SLC Damping Ring Kicker Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2331-2334.
[n] J. H. Ormrod et al., “Invited Paper: The Chalk River Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper F01, pp. 245-250.
[n] D. Van Winkle et al., “Feedback Configuration Tools for LHC Low Level RF System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP098, pp. 2243-2245.
[n] A. H. Novick and M. R. Kraimer, “Jitter in H- Beam Position at Neutral Particle Beam Test Stand”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 542-545.
[n] H. A. Day, M. J. Barnes, and L. M. C. Feliciano, “Impedance Studies of the LHC Injection Kicker Magnets for HL-LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 370-373. doi:10.18429/JACoW-IPAC2015-MOPJE038
[n] W. C. Barkley, C. E. Buechler, J. T. M. Lyles, A. C. Naranjo, D. Baca, and R. E. Bratton, “Cooling Systems for the New 201.25 MHz Final Power Amplifiers at Los Alamos Neutron Science Center (LANSCE)”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3479-3481. doi:10.18429/JACoW-IPAC2015-WEPTY084
[n] M. P. Dehnel, K. L. Erdman, T. Kuo, and L. Root, “Measurements of Injected Beam Deflections at the Exit of a Cyclotron Inflector as a Function of Applied Field or Beam Energy Perturbations”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-24, pp. 239-242.
[n] B. L. Beaudoin et al., “Scaled Studies on Radio Frequency Sources for Megawatt-Class Ionospheric Heaters”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4763-4765. doi:10.18429/JACoW-IPAC2018-THPML055
[n] W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 434-437.
[n] P. Shcherbakov et al., “MINIMIZATION OF CABLE LOSSES IN FAST-CYCLING DIPOLE FOR THE SIS300 RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP05, pp. XX-XX.
[n] V. Zubko et al., “ENTHALPY MARGIN AND STABILITY OF FAST-CYCLING DIPOLE FOR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP07, pp. XX-XX.
[n] A. Nadji et al., “Status of SESAME Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP022, pp. 2315-2317.
[n] U. Krause, W. Panschow, V. R. W. Schaa, W. Schiebel, P. Schuett, and R. Baer, “The New FAIR Accelerator Complex at GSI: Project, Controls Challenges, and First Steps”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAB01, pp. 59-61.
[n] Y. Yang et al., “Compact high average power THz source driven by thermionic RF gun”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 412-415. doi:10.18429/JACoW-IPAC2024-MOPG67
[n] G. Stanford, K. Fong, S. Hutton, and R. Worsham, “A New and Improved RF Resonator Segment for the TRIUMF Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2942-2945.
[n] A. N. Otis and R. Damm, “Drift Tube Quadrupoles”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 420-425.
[n] J.-F. Ostiguy and L. Michelotti, “CHEF: A Framework for Accelerator Optics and Simulation”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUAPMP02, pp. 153-156.
[n] Y. Li, J. Pflueger, E. Gluskin, and N. Vinokurov, “Fine Tuning of the K-parameter of Two Segments of the European XFEL Undulator Systems”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPC28, pp. 144-147.
[n] A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP10, pp. XX-XX.
[n] M. Kasa et al., “Status of the Superconducting Undulator Program at the Advanced Photon Source”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 490-493. doi:10.18429/JACoW-NAPAC2019-TUPLH01
[n] S. Reiche and E. Prat, “Growth Rates and Coherence Properties of FODO-lattice based X-ray Free Electron Lasers”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOOC02, pp. 25-28.
[n] E. R. Moog et al., “Magnetic Performance of Insertion Devices at the Advanced Photon Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4C012, pp. 3224-3226.
[n] R. F. Koontz, “Multiple Beam Pulse Capability of the SLAC Injector”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 104-110.
[n] F. Sannibale et al., “Commissioning of BL 7.2, the New Diagnostic Beamline at the ALS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT140, pp. 2783-2785.
[n] E. A. Knapp and W. J. Shlaer, “Design and Initial Performance of a 20 MeV High Current Side Coupled Cavity Electron Accelerator”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper G-6, pp. 635-659.
[n] W. Vigano, B. Dehning, E. Effinger, G. G. Venturini, and C. Zamantzas, “Comparison of Three Different Concepts of High Dynamic Range and Dependability Optimised Current Measurement Digitisers for Beam Loss Systems”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA09, pp. 66-70.
[n] L. J. Nevay et al., “Micron-scale Laser-wire at the ATF-II at KEK Commissioning and Results”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC158, pp. 1401-1403.
[n] H. Sakamoto et al., “A New Continuous Muon Beam Line Using a Highly Efficient Pion Capture System at RCNP”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP020, pp. 856-858.
[n] R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3638-3642. doi:10.18429/JACoW-IPAC2015-THXB1
[n] Q. R. Marksteiner et al., “Using Off-Axis Undulator Radiation as a Longitudinal Electron-Beam Diagnostic”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEZD4, unpublished.
[n] G. B. Sharkov, A. A. Krasnov, S. A. Polikhov, R. Cisneros, and R. J. Patrick, “100 kW Very Compact Pulsed Solid-State RF Amplifier. Development and Tests”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 873-876. doi:10.18429/JACoW-NAPAC2016-WEB4CO04
[n] R. L. Witkover, V. Castillo, and E. Zitvogel, “Beam Current Monitoring in the AGS Booster and Its Transfer Lines”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1267-1270.
[n] N. Juntong, Ch. Dhammatong, P. Sudmuang, and N. Suradet, “Six Months of Operation of the New RF Cavity System of SLRI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4331-4333. doi:10.18429/JACoW-IPAC2017-THPIK103
[n] W. Barletta, M. Calderon, F. Holdener, C. Foerster, and D. Petersen, “Distributed Ion Pump Testing for PEP-II, Asymmetric B-Factory Collider”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3836-3839.
[n] Y.-C. Du et al., “X-Ray Spectra Reconstruction of Thomson Scattering Source From Analysis of Attenuation Data”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP009, pp. 586-588.
[n] P. K. Kankiya and J. P. Jamilkowski, “Python Software for Measuring Wavelength at Optically Pumped Polarized Ion Source (OPPIS)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 72-73. doi:10.18429/JACoW-ICALEPCS2015-MOM302
[n] Y. Hirose et al., “Development of compact ultra-high power pulsed power supply”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB065, unpublished.
[n] K. L. Erdman, R. Poirier, O. K. Fredriksson, J. F. Weldon, and W. A. Grundman, “TRIUMF RF Amplifier and Resonator System”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 451-459.
[n] S. Varnasseri, M. M. Shehab, and G. Vignola, “Design of Injection Pulsed Magnets for SESAME Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN048, pp. 266-268.
[n] T. Junginger, W. Weingarten, R. Seviour, and C. P. Welsch, “RF and Surface Properties of Bulk Niobium and Niobium Film Samples”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC033, pp. 2278-2280.
[n] A. S. Setty, “Beam Dynamics Tools for Linacs Design”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB064, pp. 987-989.
[n] R. Huhmann et al., “The FAIR Control System - System Architecture and First Implementations”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC097, pp. 328-331.
[n] M. Rescic, R. Seviour, and W. Blokland, “A Holistic Approach to Accelerator Reliability Modeling”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4163-4166. doi:10.18429/JACoW-IPAC2016-THPOY031
For LaTeX
Use Complete Form
For BibTeX
References
- D. G. Morris et al., “RF System for FRIB Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1765-1770.
- S. Thielk, R. Agustsson, P. Carriere, and S. Kutsaev, “Evaluation of low-loss alumina material for high-power RF windows”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA174, pp. 4373-4376.
- H. Harada et al., “Current Status of Virtual Accelerator at J-PARC 3 GeV Rapid Cycling Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN028, pp. 215-217.
- T. Mattison, R. Cassel, A. Donaldson, G. Gross, and A. Harvey, “Operational Experience with SLC Damping Ring Kicker Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2331-2334.
- J. H. Ormrod et al., “Invited Paper: The Chalk River Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper F01, pp. 245-250.
- D. Van Winkle et al., “Feedback Configuration Tools for LHC Low Level RF System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP098, pp. 2243-2245.
- A. H. Novick and M. R. Kraimer, “Jitter in H- Beam Position at Neutral Particle Beam Test Stand”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 542-545.
- H. A. Day, M. J. Barnes, and L. M. C. Feliciano, “Impedance Studies of the LHC Injection Kicker Magnets for HL-LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 370-373.
- W. C. Barkley, C. E. Buechler, J. T. M. Lyles, A. C. Naranjo, D. Baca, and R. E. Bratton, “Cooling Systems for the New 201.25 MHz Final Power Amplifiers at Los Alamos Neutron Science Center (LANSCE)”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3479-3481.
- M. P. Dehnel, K. L. Erdman, T. Kuo, and L. Root, “Measurements of Injected Beam Deflections at the Exit of a Cyclotron Inflector as a Function of Applied Field or Beam Energy Perturbations”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-24, pp. 239-242.
- B. L. Beaudoin et al., “Scaled Studies on Radio Frequency Sources for Megawatt-Class Ionospheric Heaters”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4763-4765.
- W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 434-437.
- P. Shcherbakov et al., “MINIMIZATION OF CABLE LOSSES IN FAST-CYCLING DIPOLE FOR THE SIS300 RING”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP05, pp. XX-XX.
- V. Zubko et al., “ENTHALPY MARGIN AND STABILITY OF FAST-CYCLING DIPOLE FOR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP07, pp. XX-XX.
- A. Nadji et al., “Status of SESAME Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP022, pp. 2315-2317.
- U. Krause, W. Panschow, V. R. W. Schaa, W. Schiebel, P. Schuett, and R. Baer, “The New FAIR Accelerator Complex at GSI: Project, Controls Challenges, and First Steps”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOAB01, pp. 59-61.
- Y. Yang et al., “Compact high average power THz source driven by thermionic RF gun”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG67, pp. 412-415.
- G. Stanford, K. Fong, S. Hutton, and R. Worsham, “A New and Improved RF Resonator Segment for the TRIUMF Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2942-2945.
- A. N. Otis and R. Damm, “Drift Tube Quadrupoles”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 420-425.
- J.-F. Ostiguy and L. Michelotti, “CHEF: A Framework for Accelerator Optics and Simulation”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUAPMP02, pp. 153-156.
- Y. Li, J. Pflueger, E. Gluskin, and N. Vinokurov, “Fine Tuning of the K-parameter of Two Segments of the European XFEL Undulator Systems”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPC28, pp. 144-147.
- A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP10, pp. XX-XX.
- M. Kasa et al., “Status of the Superconducting Undulator Program at the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 490-493.
- S. Reiche and E. Prat, “Growth Rates and Coherence Properties of FODO-lattice based X-ray Free Electron Lasers”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOOC02, pp. 25-28.
- E. R. Moog et al., “Magnetic Performance of Insertion Devices at the Advanced Photon Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4C012, pp. 3224-3226.
- R. F. Koontz, “Multiple Beam Pulse Capability of the SLAC Injector”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 104-110.
- F. Sannibale et al., “Commissioning of BL 7.2, the New Diagnostic Beamline at the ALS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT140, pp. 2783-2785.
- E. A. Knapp and W. J. Shlaer, “Design and Initial Performance of a 20 MeV High Current Side Coupled Cavity Electron Accelerator”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper G-6, pp. 635-659.
- W. Vigano, B. Dehning, E. Effinger, G. G. Venturini, and C. Zamantzas, “Comparison of Three Different Concepts of High Dynamic Range and Dependability Optimised Current Measurement Digitisers for Beam Loss Systems”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA09, pp. 66-70.
- L. J. Nevay et al., “Micron-scale Laser-wire at the ATF-II at KEK Commissioning and Results”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC158, pp. 1401-1403.
- H. Sakamoto et al., “A New Continuous Muon Beam Line Using a Highly Efficient Pion Capture System at RCNP”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP020, pp. 856-858.
- R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3638-3642.
- Q. R. Marksteiner et al., “Using Off-Axis Undulator Radiation as a Longitudinal Electron-Beam Diagnostic”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper WEZD4, unpublished.
- G. B. Sharkov, A. A. Krasnov, S. A. Polikhov, R. Cisneros, and R. J. Patrick, “100 kW Very Compact Pulsed Solid-State RF Amplifier. Development and Tests”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 873-876.
- R. L. Witkover, V. Castillo, and E. Zitvogel, “Beam Current Monitoring in the AGS Booster and Its Transfer Lines”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1267-1270.
- N. Juntong, Ch. Dhammatong, P. Sudmuang, and N. Suradet, “Six Months of Operation of the New RF Cavity System of SLRI”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4331-4333.
- W. Barletta, M. Calderon, F. Holdener, C. Foerster, and D. Petersen, “Distributed Ion Pump Testing for PEP-II, Asymmetric B-Factory Collider”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3836-3839.
- Y.-C. Du et al., “X-Ray Spectra Reconstruction of Thomson Scattering Source From Analysis of Attenuation Data”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP009, pp. 586-588.
- P. K. Kankiya and J. P. Jamilkowski, “Python Software for Measuring Wavelength at Optically Pumped Polarized Ion Source (OPPIS)”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 72-73.
- Y. Hirose et al., “Development of compact ultra-high power pulsed power supply”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB065, this conference.
- K. L. Erdman, R. Poirier, O. K. Fredriksson, J. F. Weldon, and W. A. Grundman, “TRIUMF RF Amplifier and Resonator System”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 451-459.
- S. Varnasseri, M. M. Shehab, and G. Vignola, “Design of Injection Pulsed Magnets for SESAME Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN048, pp. 266-268.
- T. Junginger, W. Weingarten, R. Seviour, and C. P. Welsch, “RF and Surface Properties of Bulk Niobium and Niobium Film Samples”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC033, pp. 2278-2280.
- A. S. Setty, “Beam Dynamics Tools for Linacs Design”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB064, pp. 987-989.
- R. Huhmann et al., “The FAIR Control System - System Architecture and First Implementations”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC097, pp. 328-331.
- M. Rescic, R. Seviour, and W. Blokland, “A Holistic Approach to Accelerator Reliability Modeling”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4163-4166.
Back to search