Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. M. Wen and X. H. Wang, “Commissioning Study of the Parasitic Mode with 3W1 Wiggler Magnet on the BEPC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15010, pp. XX-XX.
[n] N. Aftab et al., “4D Transverse Phase Space characterization of high brightness electron beams at PITZ”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4605-4608. doi:10.18429/JACoW-IPAC2023-THPL074
[n] J. Chavanne, L. Goirand, G. Lebec, C. Penel, and F. Revol, “Upgrade of the Insertion Devices at the ESRF”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD010, pp. 3105-3107.
[n] D. Xiang, “Recent Advances and New Techniques in Visualization of Ultra-short Relativistic Electron Bunches”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEXB01, pp. 2091-2095.
[n] M. Blank et al., “Experimental Demonstration of High Power Millimeter Wave Gyro-Amplifers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP151, pp. 1016-1018.
[n] G. Li, “Tokamak Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 76-78. doi:10.18429/JACoW-NAPAC2016-MOPOB05
[n] P. A. Rapidis et al., “The Fermilab Antiproton SourcC:PAC Recent Performance and Improvements”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 404-407.
[n] T. Mimashi et al., “The Design of Beam Abort System for the Super KEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA023, pp. 1378-1380.
[n] T. Aoki et al., “Generation and Application of High Quality Photoelectron Beam at Waseda University”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B15, pp. 1654-1656.
[n] A. Fornara et al., “First proton crabbing at the LHC via head-on beam-beam interaction”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2317-2320. doi:10.18429/JACoW-IPAC2025-WEPS036
[n] S. Xu, X. Kong, Q. Le, and J. Zhao, “Applications of CANbus and ControlNet in EPICS System of BEPCII”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP558, pp. XX-XX.
[n] J. Zhao, J. E. Chen, Z. Y. Guo, Y. R. Lu, S. X. Peng, and Q. F. Zhou, “Radiation Safety System for PKUNIFTY Project”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP223, pp. 112-114.
[n] F. D. Dziuba, M. Busch, H. Klein, H. Podlech, U. Ratzinger, and C. Zhang, “Development of Superconducting CH-Cavities for the EUROTRANS Injector Linac”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO017, pp. 578-581.
[n] J. E. Spencer and B. Zotter, “Optics Effects & Optinons for TeV Colliders - II”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 481-484.
[n] F. D. Dziuba et al., “Development of Superconducting CH Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO037, pp. 169-171.
[n] J. Gray, K. Skoufaris, and F. Carlier, “Cleaning turn-by-turn data from the LHC with autoencoders”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5043, unpublished.
[n] S. M. Polozov et al., “Commissioning and First Tests of the New Standing Wave 10 Mev Electron Accelerator”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 173-175. doi:10.18429/JACoW-RUPAC2016-TUCASH02
[n] R. Giannini, “Calculation of Protonium Production Rate from Corotating Beams of P and H_ in LEAR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 505-508.
[n] X. Guo, K. X. Liu, Z. Ni, Q. Feng, and C. Yang, “Fabrication of Large-area MgB2 Films on Copper Substrates”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 917-919. doi:10.18429/JACoW-SRF2017-THPB078
[n] D. Rifuggiato, L. Calabretta, G. Cuttone, S. Gammino, G. Raia, and A. Rovelli, “First Years of Operation of the LNS Superconducting Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-03, pp. 599-602.
[n] Y. Song and K. Fan, “A THz-Driven Split Ring Resonator for Temporal Characterization of Femtosecond MeV Electron Beam”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 250-253. doi:10.18429/JACoW-IBIC2020-THPP22
[n] E. Crosbie, E. Berrill, R. George, T. Hardek, and T. Kohe, “Measurement of the Titanium Vacuum Chamber Eddy Current Fields and Pole Face Winding Corrections for the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1000-1002.
[n] B. D. Muratori, H. L. Owen, and J. A. Varley, “Optics Layout for the ERL Prototype at Daresbury Laboratory”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF061, pp. 449-451.
For LaTeX
Use Complete Form
For BibTeX
References
- X. M. Wen and X. H. Wang, “Commissioning Study of the Parasitic Mode with 3W1 Wiggler Magnet on the BEPC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15010, pp. XX-XX.
- N. Aftab et al., “4D Transverse Phase Space characterization of high brightness electron beams at PITZ”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL074, pp. 4605-4608.
- J. Chavanne, L. Goirand, G. Lebec, C. Penel, and F. Revol, “Upgrade of the Insertion Devices at the ESRF”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD010, pp. 3105-3107.
- D. Xiang, “Recent Advances and New Techniques in Visualization of Ultra-short Relativistic Electron Bunches”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEXB01, pp. 2091-2095.
- M. Blank et al., “Experimental Demonstration of High Power Millimeter Wave Gyro-Amplifers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP151, pp. 1016-1018.
- G. Li, “Tokamak Accelerator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 76-78.
- P. A. Rapidis et al., “The Fermilab Antiproton SourcC:PAC Recent Performance and Improvements”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 404-407.
- T. Mimashi et al., “The Design of Beam Abort System for the Super KEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA023, pp. 1378-1380.
- T. Aoki et al., “Generation and Application of High Quality Photoelectron Beam at Waseda University”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B15, pp. 1654-1656.
- A. Fornara et al., “First proton crabbing at the LHC via head-on beam-beam interaction”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS036, pp. 2317-2320.
- S. Xu, X. Kong, Q. Le, and J. Zhao, “Applications of CANbus and ControlNet in EPICS System of BEPCII”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP558, pp. XX-XX.
- J. Zhao, J. E. Chen, Z. Y. Guo, Y. R. Lu, S. X. Peng, and Q. F. Zhou, “Radiation Safety System for PKUNIFTY Project”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP223, pp. 112-114.
- F. D. Dziuba, M. Busch, H. Klein, H. Podlech, U. Ratzinger, and C. Zhang, “Development of Superconducting CH-Cavities for the EUROTRANS Injector Linac”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO017, pp. 578-581.
- J. E. Spencer and B. Zotter, “Optics Effects & Optinons for TeV Colliders - II”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 481-484.
- F. D. Dziuba et al., “Development of Superconducting CH Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO037, pp. 169-171.
- J. Gray, K. Skoufaris, and F. Carlier, “Cleaning turn-by-turn data from the LHC with autoencoders”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5043, this conference.
- S. M. Polozov et al., “Commissioning and First Tests of the New Standing Wave 10 Mev Electron Accelerator”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 173-175.
- R. Giannini, “Calculation of Protonium Production Rate from Corotating Beams of P and H_ in LEAR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 505-508.
- X. Guo, K. X. Liu, Z. Ni, Q. Feng, and C. Yang, “Fabrication of Large-area MgB2 Films on Copper Substrates”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 917-919.
- D. Rifuggiato, L. Calabretta, G. Cuttone, S. Gammino, G. Raia, and A. Rovelli, “First Years of Operation of the LNS Superconducting Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-03, pp. 599-602.
- Y. Song and K. Fan, “A THz-Driven Split Ring Resonator for Temporal Characterization of Femtosecond MeV Electron Beam”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 250-253.
- E. Crosbie, E. Berrill, R. George, T. Hardek, and T. Kohe, “Measurement of the Titanium Vacuum Chamber Eddy Current Fields and Pole Face Winding Corrections for the Zero Gradient Synchrotron (ZGS)”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1000-1002.
- B. D. Muratori, H. L. Owen, and J. A. Varley, “Optics Layout for the ERL Prototype at Daresbury Laboratory”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF061, pp. 449-451.
Back to search