Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Kreider, “The FAIR Timing Master: A Discussion of Performance Requirements and Architectures for a High-precision Timing System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST06, pp. 1256-1259.
[n] R. L. Geng, A. Crawford, G. Eremeev, H. Padamsee, and J. Sears, “A 1500MHz Niobium Cavity Made of Electropolished Half-Cells”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB050, pp. 1312-1313.
[n] T. Szymocha et al., “SOLARIS Digital User Office”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 873-875. doi:10.18429/JACoW-ICALEPCS2017-TUPHA188
[n] A. I. Wawrzyniak et al., “Performance of SOLARIS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2490-2494. doi:10.18429/JACoW-IPAC2017-WEOCA1
[n] F. Franchi, T. Beier, M. Kirk, M. Moritz, G. Rumolo, and R. Tomas, “A Method to Measure the Skew Quadrupole Strengths in the SIS-18 using Two BPMs”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT052, pp. 1957-1959.
[n] W. Bensiek, J. Dateo, J. Hager, H. Padamsee, W. Pruitt, and P. Williams, “Superconducting Performance of CEBAF/Cornell Prototype Cavities Fabricated by Babcock & Wilcox”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1887-1890.
[n] J. Dedic, G. Jansa, M. Plesko, and R. Sabjan, “Uniform Motion Control Solution for Variety of Motion Applications”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP002, pp. 1526-1528.
[n] L. Garc?¡a-Tabar?®s, P. Abramian, J. Calero, F. Toral, A. Ijspeert, and J. C. P?®rez, “Dimensional Metrology of Cylinders Based on Digital Image Processing: Application to LHC Corrector Magnets”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE003, pp. 2394-2396.
[n] Z. Liu, H. Cease, J. T. Collins, J. Nudell, and C. A. Preissner, “Optimization for the APS-U Magnet Support Structure”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 254-256. doi:10.18429/JACoW-MEDSI2016-TUPE44
[n] F. Giacuzzo and J. Miertusova, “How to Save Money Designing a Vacuum System for a Third Generation Synchrotron Light Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP082L, pp. 2527-2529.
[n] W. Sliwinski, P. Charrue, and I. Yastrebov, “Status of the RBAC Infrastructure and Lessons Learnt from its Deployment in LHC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU009, pp. 702-705.
[n] B. Autin et al., “CERN 400 GeV Proton Storage Rings with Superconducting Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1187-1191.
[n] L. S. Cowie, P. Goudket, B. L. Militsyn, G. Burt, and T. J. Jones, “Low Power RF Characterisation of the 400 Hz Photoinjector for CLARA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4342-4345. doi:10.18429/JACoW-IPAC2017-THPIK106
[n] J. A. Avila-Abellan, T. M. Cobb, R. Hino, O. H. Seeck, X. Serra-Gallifa, and S. Zhang, “Towards Defining a Synchronization Standard Between Beamline Components and Synchrotron Accelerators”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1242-1246. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO22
[n] A. Kisiel et al., “BPM Based Optics Correction of the Solaris 1.5 GeV Storage Ring”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 836-839. doi:10.18429/JACoW-IBIC2016-WEPG78
[n] D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4096-4099. doi:10.18429/JACoW-IPAC2017-THPAB154
[n] J. J. Wiechecki et al., “Impact of the DBA Blocks Alignment on the Beam Dynamics of the Storage Ring in Solaris”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2902-2904. doi:10.18429/JACoW-IPAC2016-WEPOW032
[n] A. Salom, F. Perez, R. Lindvall, L. Malmgren, A. M. Milan, and A. M. Mitrovic, “Digital LLRF for MAX IV”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4037-4039. doi:10.18429/JACoW-IPAC2017-THPAB135
[n] D. B. Shwartz et al., “Present Status of VEPP-2000”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUCHX02, pp. XX-XX.
[n] J. Miertusova, “Vacuum Performance Characteristic of a 5m-long Pump Free Insertion Device Vacuum Chamber for ELETTRA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP19C, pp. 2190-2192.
[n] J. Holmes, S. Cousineau, V. Danilov, A. Fedotov, S. Henderson, and A. Shishlo, “Computational Studies of Collective Beam Dynamics in High Intensity Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAA005, pp. 117-119.
[n] A. I. Papash, A.-S. Mueller, E. B. Levichev, P. A. Piminov, S. V. Sinyatkin, and K. Zolotarev, “An Ultra-low Emittance Model for the ANKA Synchrotron Radiation Source Including Non-linear Effects”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 228-230. doi:10.18429/JACoW-IPAC2014-MOPRO064
[n] S. Condamoor, S. Allison, J. J. Sebek, J. A. Vasquez, and J. V. Wachter, “Booster RF Upgrade for SPEAR3”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 401-405. doi:10.18429/JACoW-ICALEPCS2017-TUPHA014
[n] W. W. Terpstra, “The Case for Soft-CPUs in Accelerator Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST05, pp. 1252-1255.
[n] L. Hendrickson et al., “Fast Feedback for Linear Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE03, pp. 2389-2393.
[n] S. C. Snowdon, “Magnet Profile Design”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 848-853.
[n] R. L. Geng, A. Crawford, G. Eremeev, and H. Padamsee, “Continuous Current Oscillation Electropolishing and Applications to Half-Cells”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP13, pp. 311-312.
[n] P. Martín-Luna et al., “Hydrodynamic model for particle beam-driven wakefield in carbon nanotubes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1480-1483. doi:10.18429/JACoW-IPAC2023-TUPA066
[n] A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX.
[n] CA. King and R. Neswold, “Upgrading the Fermilab Fire and Security Reporting System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUCAUST01, pp. 563-566.
[n] J. G. Alessi et al., “Progress on Test EBIS and the Design of an EBIS-Based RHIC Preinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPB004, pp. 363-365.
[n] E. Harms, B. Hendricks, and T. L. Williams, “Further Development of Instrumentation for the Tevatron Beam Dump”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2196-2198.
[n] P. Charrue, M. Buttner, F. Ehm, and P. Jurcso, “Improving Software Services Through Diagnostic and Monitoring Capabilities”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1070-1072. doi:10.18429/JACoW-ICALEPCS2015-WEPGF155
[n] D. J. Nicklaus, “Supporting Multiple Control Systems at Fermilab”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUD003, pp. 346-348.
[n] T. M. Cope, S. Allison, W. J. Corbett, and Y. H. Xu, “Upgrades to the SPEAR3 Single-Photon Bunch Measurement System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4223-4224. doi:10.18429/JACoW-IPAC2016-THPOY051
[n] W. Sch?Âllkopf et al., “Status of the Fritz Haber Institute THz FEL”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPB30, pp. 315-317.
[n] D. S. Todd, D. Leitner, and M. M. Strohmeier, “Low Energy Ion Beam Diagnostics at the VENUS ECR Ion Source”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF050, pp. 227-231.
[n] X. Serra-Gallifa et al., “Harmony: A Generic FPGA Based Solution for Flexible Feedback Systems”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 141-144. doi:10.18429/JACoW-PCAPAC2016-FRFMPLCO06
[n] M. B. Ripert and A. Peters, “Target Materials for a Low Energy Pepper-Pot Emittance Device”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD36, pp. 378-380.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Kreider, “The FAIR Timing Master: A Discussion of Performance Requirements and Architectures for a High-precision Timing System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHMUST06, pp. 1256-1259.
- R. L. Geng, A. Crawford, G. Eremeev, H. Padamsee, and J. Sears, “A 1500MHz Niobium Cavity Made of Electropolished Half-Cells”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB050, pp. 1312-1313.
- T. Szymocha et al., “SOLARIS Digital User Office”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 873-875.
- A. I. Wawrzyniak et al., “Performance of SOLARIS Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2490-2494.
- F. Franchi, T. Beier, M. Kirk, M. Moritz, G. Rumolo, and R. Tomas, “A Method to Measure the Skew Quadrupole Strengths in the SIS-18 using Two BPMs”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT052, pp. 1957-1959.
- W. Bensiek, J. Dateo, J. Hager, H. Padamsee, W. Pruitt, and P. Williams, “Superconducting Performance of CEBAF/Cornell Prototype Cavities Fabricated by Babcock & Wilcox”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1887-1890.
- J. Dedic, G. Jansa, M. Plesko, and R. Sabjan, “Uniform Motion Control Solution for Variety of Motion Applications”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP002, pp. 1526-1528.
- L. Garc?¡a-Tabar?®s, P. Abramian, J. Calero, F. Toral, A. Ijspeert, and J. C. P?®rez, “Dimensional Metrology of Cylinders Based on Digital Image Processing: Application to LHC Corrector Magnets”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE003, pp. 2394-2396.
- Z. Liu, H. Cease, J. T. Collins, J. Nudell, and C. A. Preissner, “Optimization for the APS-U Magnet Support Structure”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 254-256.
- F. Giacuzzo and J. Miertusova, “How to Save Money Designing a Vacuum System for a Third Generation Synchrotron Light Source”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP082L, pp. 2527-2529.
- W. Sliwinski, P. Charrue, and I. Yastrebov, “Status of the RBAC Infrastructure and Lessons Learnt from its Deployment in LHC”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMMU009, pp. 702-705.
- B. Autin et al., “CERN 400 GeV Proton Storage Rings with Superconducting Magnets”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1187-1191.
- L. S. Cowie, P. Goudket, B. L. Militsyn, G. Burt, and T. J. Jones, “Low Power RF Characterisation of the 400 Hz Photoinjector for CLARA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4342-4345.
- J. A. Avila-Abellan, T. M. Cobb, R. Hino, O. H. Seeck, X. Serra-Gallifa, and S. Zhang, “Towards Defining a Synchronization Standard Between Beamline Components and Synchrotron Accelerators”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO22, pp. 1242-1246.
- A. Kisiel et al., “BPM Based Optics Correction of the Solaris 1.5 GeV Storage Ring”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 836-839.
- D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4096-4099.
- J. J. Wiechecki et al., “Impact of the DBA Blocks Alignment on the Beam Dynamics of the Storage Ring in Solaris”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2902-2904.
- A. Salom, F. Perez, R. Lindvall, L. Malmgren, A. M. Milan, and A. M. Mitrovic, “Digital LLRF for MAX IV”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4037-4039.
- D. B. Shwartz et al., “Present Status of VEPP-2000”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUCHX02, pp. XX-XX.
- J. Miertusova, “Vacuum Performance Characteristic of a 5m-long Pump Free Insertion Device Vacuum Chamber for ELETTRA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP19C, pp. 2190-2192.
- J. Holmes, S. Cousineau, V. Danilov, A. Fedotov, S. Henderson, and A. Shishlo, “Computational Studies of Collective Beam Dynamics in High Intensity Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAA005, pp. 117-119.
- A. I. Papash, A.-S. Mueller, E. B. Levichev, P. A. Piminov, S. V. Sinyatkin, and K. Zolotarev, “An Ultra-low Emittance Model for the ANKA Synchrotron Radiation Source Including Non-linear Effects”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 228-230.
- S. Condamoor, S. Allison, J. J. Sebek, J. A. Vasquez, and J. V. Wachter, “Booster RF Upgrade for SPEAR3”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 401-405.
- W. W. Terpstra, “The Case for Soft-CPUs in Accelerator Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHMUST05, pp. 1252-1255.
- L. Hendrickson et al., “Fast Feedback for Linear Colliders”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAE03, pp. 2389-2393.
- S. C. Snowdon, “Magnet Profile Design”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 848-853.
- R. L. Geng, A. Crawford, G. Eremeev, and H. Padamsee, “Continuous Current Oscillation Electropolishing and Applications to Half-Cells”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP13, pp. 311-312.
- P. Martín-Luna et al., “Hydrodynamic model for particle beam-driven wakefield in carbon nanotubes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA066, pp. 1480-1483.
- A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX.
- CA. King and R. Neswold, “Upgrading the Fermilab Fire and Security Reporting System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUCAUST01, pp. 563-566.
- J. G. Alessi et al., “Progress on Test EBIS and the Design of an EBIS-Based RHIC Preinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPB004, pp. 363-365.
- E. Harms, B. Hendricks, and T. L. Williams, “Further Development of Instrumentation for the Tevatron Beam Dump”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2196-2198.
- P. Charrue, M. Buttner, F. Ehm, and P. Jurcso, “Improving Software Services Through Diagnostic and Monitoring Capabilities”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1070-1072.
- D. J. Nicklaus, “Supporting Multiple Control Systems at Fermilab”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUD003, pp. 346-348.
- T. M. Cope, S. Allison, W. J. Corbett, and Y. H. Xu, “Upgrades to the SPEAR3 Single-Photon Bunch Measurement System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4223-4224.
- W. Sch?Âllkopf et al., “Status of the Fritz Haber Institute THz FEL”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPB30, pp. 315-317.
- D. S. Todd, D. Leitner, and M. M. Strohmeier, “Low Energy Ion Beam Diagnostics at the VENUS ECR Ion Source”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF050, pp. 227-231.
- X. Serra-Gallifa et al., “Harmony: A Generic FPGA Based Solution for Flexible Feedback Systems”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 141-144.
- M. B. Ripert and A. Peters, “Target Materials for a Low Energy Pepper-Pot Emittance Device”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD36, pp. 378-380.
Back to search