Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Manola-Poggioli and L. Scibile, “CERN Safety Alarms Monitoring System (CSAM)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH156, pp. 2293-2295.
[n] P. Leban, J.-C. Denard, N. Hubert, and D. T. Tinta, “Photon Beam Position Measurements by Libera Photon Using Copper Blade Sensors at Soleil Synchrotron”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM023, pp. 160-162.
[n] M. Cornacchia and A. Hofmann, “Radiation Damping Partitions and RF-Fields”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA18, pp. 564-566.
[n] H. Maesaka, “Full Energy Injection from the Sacla into the Spring-8 Storage Ring”, in Proc. IPAC'20, Caen, France, May 2020, paper FRXPLM02, pp. XX-XX.
[n] C.-S. Huang, B.-Y. Chen, C.-K. Kuan, W.-Y. Lai, T.-C. Tseng, and H.-S. Wang, “Anodic bonding of silicon and glass for bent monochromator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4953-4956. doi:10.18429/JACoW-IPAC2023-THPM028
[n] K. T. Nguyen and H. S. Uhm, “Ion Beam Cooling by Radiation and Electron Heat Sink”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2427-2430.
[n] S. Di Mitri et al., “Commissioning and Initial Operation of FERMI@Elettra”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUZA01, pp. 918-922.
[n] D. J. Weidman et al., “Fast Risetime Magnetic Field Coil for Electron Beam Propagation Studies”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3141-3144.
[n] E. Roussel et al., “Numerical Study of the Microbunching Instability at UVSOR-III: Influence of the Resistive and Inductive Impedances”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1656-1658. doi:10.18429/JACoW-IPAC2014-TUPRI042
[n] D. Heiliger, W. Hillert, and B. Neff, “A New Load Lock System for the Source of Polarised Electrons at ELSA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI006, pp. 294-296.
[n] P. Raimondi et al., “Luminosity Upgrades for the SLC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA1, pp. 3384-3386.
[n] T. Kotseroglou et al., “Recent Developments in the Design of the NLC Positron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA28, pp. 3450-3452.
[n] R. J. Abrams et al., “Fast Time-of-Flight System for Muon Cooling Experiments”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP040, pp. 172-174.
[n] S. Takano et al., “Status and Activities of the SPring-8 Diagnostics Beamlines”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB52, pp. 186-190.
[n] M. J. Rhee and R. F. Schneider, “Compact Pulsed Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3192-3195.
[n] S. V. Kutsaev et al., “Linear Accelerator for Demonstration of X-Ray Radiotherapy with Flash Effect”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 243-246. doi:10.18429/JACoW-LINAC2022-MOPORI09
[n] M. Cornacchia and G. Parzen, “Effect of a Spectrometer Magnet on the Beam-Beam Interaction”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2555-2558.
[n] L. Faillace et al., “Design, fabrication and mechanical tests of TIG-welded Ka-band accelerating structures for ultra-high gradient applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2976-2979. doi:10.18429/JACoW-IPAC2023-WEPA134
[n] O. Piquet, “RFQ Developments at CEA-IRFU”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 42-44. doi:10.18429/JACoW-IPAC2016-MOOCA02
[n] M. Kurz, P. Hulsmann, H. Klein, and A. Schempp, “Measurements on Iris-Structures with Rectangular Holes”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3023-3026.
[n] R. Calaga et al., “Small Angle Crab Compensation for LHC IR Upgrade”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS089, pp. 1853-1855.
[n] H. Abe et al., “Simulation for an RF Gun Test Apparatus in the SPring-8 Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA60, pp. 2749-2751.
[n] G.-Y. Hsiung, Y.-C. Yang, F.-Y. Chang, C.-C. Chang, and C.-K. Chan, “Setup of Goubau Line system for impedance-measurement of vacuum components at the NSRRC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1578-1581. doi:10.18429/JACoW-IPAC2024-TUPR64
[n] O. Zagorodnova and T. Limberg, “Impedance Budget Database for the European XFEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP060, pp. 1220-1222.
[n] Z. S. Li et al., “Multi-physics Analysis of a CW Four-rod RFQ”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 138-141. doi:10.18429/JACoW-HIAT2018-WEPB03
[n] Y. Bao, A. Afanasev, Y. S. Derbenev, V. S. Morozov, A. V. Sy, and R. P. Johnson, “Optimization of a Skew Parametric Resonance Ionization Cooling Channel Using Genetic Algorithm”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 111-113. doi:10.18429/JACoW-IPAC2017-MOPAB015
[n] M. Yoshioka, “Review of Accelerator-based Boron Neutron Capture Therapy Machines”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3171-3175. doi:10.18429/JACoW-IPAC2016-THXB01
For LaTeX
Use Complete Form
For BibTeX
References
- E. Manola-Poggioli and L. Scibile, “CERN Safety Alarms Monitoring System (CSAM)”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH156, pp. 2293-2295.
- P. Leban, J.-C. Denard, N. Hubert, and D. T. Tinta, “Photon Beam Position Measurements by Libera Photon Using Copper Blade Sensors at Soleil Synchrotron”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM023, pp. 160-162.
- M. Cornacchia and A. Hofmann, “Radiation Damping Partitions and RF-Fields”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA18, pp. 564-566.
- H. Maesaka, “Full Energy Injection from the Sacla into the Spring-8 Storage Ring”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper FRXPLM02, pp. XX-XX.
- C.-S. Huang, B.-Y. Chen, C.-K. Kuan, W.-Y. Lai, T.-C. Tseng, and H.-S. Wang, “Anodic bonding of silicon and glass for bent monochromator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM028, pp. 4953-4956.
- K. T. Nguyen and H. S. Uhm, “Ion Beam Cooling by Radiation and Electron Heat Sink”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2427-2430.
- S. Di Mitri et al., “Commissioning and Initial Operation of FERMI@Elettra”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUZA01, pp. 918-922.
- D. J. Weidman et al., “Fast Risetime Magnetic Field Coil for Electron Beam Propagation Studies”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3141-3144.
- E. Roussel et al., “Numerical Study of the Microbunching Instability at UVSOR-III: Influence of the Resistive and Inductive Impedances”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1656-1658.
- D. Heiliger, W. Hillert, and B. Neff, “A New Load Lock System for the Source of Polarised Electrons at ELSA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI006, pp. 294-296.
- P. Raimondi et al., “Luminosity Upgrades for the SLC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA1, pp. 3384-3386.
- T. Kotseroglou et al., “Recent Developments in the Design of the NLC Positron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA28, pp. 3450-3452.
- R. J. Abrams et al., “Fast Time-of-Flight System for Muon Cooling Experiments”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP040, pp. 172-174.
- S. Takano et al., “Status and Activities of the SPring-8 Diagnostics Beamlines”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB52, pp. 186-190.
- M. J. Rhee and R. F. Schneider, “Compact Pulsed Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3192-3195.
- S. V. Kutsaev et al., “Linear Accelerator for Demonstration of X-Ray Radiotherapy with Flash Effect”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 243-246.
- M. Cornacchia and G. Parzen, “Effect of a Spectrometer Magnet on the Beam-Beam Interaction”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2555-2558.
- L. Faillace et al., “Design, fabrication and mechanical tests of TIG-welded Ka-band accelerating structures for ultra-high gradient applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA134, pp. 2976-2979.
- O. Piquet, “RFQ Developments at CEA-IRFU”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 42-44.
- M. Kurz, P. Hulsmann, H. Klein, and A. Schempp, “Measurements on Iris-Structures with Rectangular Holes”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3023-3026.
- R. Calaga et al., “Small Angle Crab Compensation for LHC IR Upgrade”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS089, pp. 1853-1855.
- H. Abe et al., “Simulation for an RF Gun Test Apparatus in the SPring-8 Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA60, pp. 2749-2751.
- G.-Y. Hsiung, Y.-C. Yang, F.-Y. Chang, C.-C. Chang, and C.-K. Chan, “Setup of Goubau Line system for impedance-measurement of vacuum components at the NSRRC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR64, pp. 1578-1581.
- O. Zagorodnova and T. Limberg, “Impedance Budget Database for the European XFEL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP060, pp. 1220-1222.
- Z. S. Li et al., “Multi-physics Analysis of a CW Four-rod RFQ”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 138-141.
- Y. Bao, A. Afanasev, Y. S. Derbenev, V. S. Morozov, A. V. Sy, and R. P. Johnson, “Optimization of a Skew Parametric Resonance Ionization Cooling Channel Using Genetic Algorithm”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 111-113.
- M. Yoshioka, “Review of Accelerator-based Boron Neutron Capture Therapy Machines”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3171-3175.
Back to search