Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Xiao, D. E. Johnson, and L. G. Vorobiev, “Dynamic Aperture and Space Charge Effect Studies for the Recycler Ring for Project-X”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD05, pp. 45-48.
[n] J. Helsper et al., “Design, Manufacturing, Assembly, Testing, and Lessons Learned of the Prototype 650 MHz Couplers”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 462-465. doi:10.18429/JACoW-LINAC2022-TUPOPA25
[n] V. V. Paramonov, V. Danielyan, A. S. Simonyan, V. M. Tsakanov, and K. Floettmann, “Start of Operation of a Standing Wave Deflecting Cavity With the Minimized Level of Aberrations”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 388-390. doi:10.18429/JACoW-RUPAC2018-WEPSB53
[n] D. J. Gibson, R. A. Marsh, and Y. Hwang, “Initial Performance Measurements of Multi-GHz Electron Bunch Trains”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 795-797. doi:10.18429/JACoW-IPAC2017-MOPIK111
[n] R. Zennaro et al., “Conceptual Design of the C-Band Module for SwissFEL”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP001, pp. 392-394.
[n] M. A. Furman et al., “Self-consistent 3D Modeling of Electron Cloud Dynamics and Beam Response”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUXAB03, pp. 764-768.
[n] A. Thomas, P. Jennewein, K.-H. Kaiser, H.-J. Kreidel, U. Ludwig-Mertin, and M. Seidl, “Design and Status of the 250t-Bending Magnets for the 1.5 GeV Harmonic Double Sided Microtron for MAMI”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE064, pp. 2379-2381.
[n] S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
[n] R. C. Rogers, J. S. Chenoweth, and J. M. Cox, “Frequency Stabilization of the Texas A&M Cyclotron by Injection Locking”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 438-444.
[n] I. Yamane, S. Hiramatsu, M. Kihara, N. Kumagai, and E. Takasaki, “Performance Improvement of the KEK PS-Booster Synchrotron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 301-304.
[n] A. H. Shapiro, R. C. Gentzlinger, J. E. Ledford, M. A. Madrid, D. I. Montoya, and T. Tajima, “A New Temperature and X-Ray Mapping System for 700-MHz 5-Cell Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH144, pp. 1116-1118.
[n] J. K. Spradlin, A. D. Palczewski, C. E. Reece, and H. Tian, “Analysis of Surface Nitrides Created During Doping" Heat Treatments of Niobium"”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 106-111. doi:10.18429/JACoW-SRF2019-MOP030
For LaTeX
Use Complete Form
For BibTeX
References
- M. Xiao, D. E. Johnson, and L. G. Vorobiev, “Dynamic Aperture and Space Charge Effect Studies for the Recycler Ring for Project-X”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD05, pp. 45-48.
- J. Helsper et al., “Design, Manufacturing, Assembly, Testing, and Lessons Learned of the Prototype 650 MHz Couplers”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 462-465.
- V. V. Paramonov, V. Danielyan, A. S. Simonyan, V. M. Tsakanov, and K. Floettmann, “Start of Operation of a Standing Wave Deflecting Cavity With the Minimized Level of Aberrations”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 388-390.
- D. J. Gibson, R. A. Marsh, and Y. Hwang, “Initial Performance Measurements of Multi-GHz Electron Bunch Trains”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 795-797.
- R. Zennaro et al., “Conceptual Design of the C-Band Module for SwissFEL”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP001, pp. 392-394.
- M. A. Furman et al., “Self-consistent 3D Modeling of Electron Cloud Dynamics and Beam Response”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUXAB03, pp. 764-768.
- A. Thomas, P. Jennewein, K.-H. Kaiser, H.-J. Kreidel, U. Ludwig-Mertin, and M. Seidl, “Design and Status of the 250t-Bending Magnets for the 1.5 GeV Harmonic Double Sided Microtron for MAMI”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE064, pp. 2379-2381.
- S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
- R. C. Rogers, J. S. Chenoweth, and J. M. Cox, “Frequency Stabilization of the Texas A&M Cyclotron by Injection Locking”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 438-444.
- I. Yamane, S. Hiramatsu, M. Kihara, N. Kumagai, and E. Takasaki, “Performance Improvement of the KEK PS-Booster Synchrotron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 301-304.
- A. H. Shapiro, R. C. Gentzlinger, J. E. Ledford, M. A. Madrid, D. I. Montoya, and T. Tajima, “A New Temperature and X-Ray Mapping System for 700-MHz 5-Cell Superconducting Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH144, pp. 1116-1118.
- J. K. Spradlin, A. D. Palczewski, C. E. Reece, and H. Tian, “Analysis of Surface Nitrides Created During Doping" Heat Treatments of Niobium"”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 106-111.
Back to search