Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Johnson, J. Jones, and P. Williams, “Jitter tolerance for the FEBE beamline on CLARA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2071-2074. doi:10.18429/JACoW-IPAC2023-TUPL143
[n] D. P. Barber, G. H. Hoffstaetter, and M. Vogt, “Polarized Protons in HERA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE049, pp. 302-304.
[n] T. Morishita et al., “The DTL/SDTL Alignment of the J-PARC Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN060, pp. 1523-1525.
[n] L. C. Teng and E. A. Crosbie, “Lattice Considerations for a Tau-Charm Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR26, pp. 3415-3417.
[n] M. T. F. Pivi and T. O. Raubenheimer, “Instability Thresholds and Generation of the Electron-cloud in the GLC/NLC and Tesla Damping Rings”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT159, pp. 2831-2833.
[n] E. A. Crosbie, “Emittance and Damping of Electrons in the Neighborhood of Resonance Fixed Points”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 506-509.
[n] A. M. Todd and M. F. Reusch, “RFQ Beam Dynamics Model Development”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU410, pp. 326-328.
[n] W. B. Lewis, “Future Factory Type Accelerators”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper G-1, pp. 600-605.
[n] J. Lewellen and J. Smedley, “Concepts for more flexible UED/UEM operation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2105-2108. doi:10.18429/JACoW-IPAC2024-WEPC61
[n] E. Asseo, G. Baribaud, J. Bosser, J. H. B. Madsen, K. Reich, and H. Van Der Beken, “The Computer Assisted Control and Data Acquisition System for the CERN PS Booster”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 354-359.
[n] T. Mitsumoto et al., “Design Study of Sector Magnets of Superconducting Ring Cyclotron for the RIKEN RI Beam Factory”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-18, pp. 237-240.
[n] G. Le Bec, J. Chavanne, L. Lefebvre, D. Martin, and C. Penel, “Magnetic Measurements and Fiducialisation of the ESRF-EBS Magnets”, in Proc. IPAC'20, Caen, France, May 2020, paper THVIR09, pp. XX-XX.
[n] B. Fernandes, P. Gessler, and C. Youngman, “High Level FPGA Programming Framework Based on Simulink”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC087, pp. 782-785.
[n] T. Shintake et al., “Development of a Smart Modulator and Efficiency Evaluation of 500 GeV e+e- C-band Linear Collider”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA12, pp. 763-765.
[n] M. F. Reusch and D. L. Bruhwiler, “Transport of Bunched Beams with Space Charge Through a Periodic Lattice”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPR08, pp. 3257-3259.
[n] S. Haghtalab, F. Abbasi, F. Ghasemi, M. Jafarzadeh, and M. Lamehi, “Basic Design of Control System for IPM Linear Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4082-4084. doi:10.18429/JACoW-IPAC2016-THPOW060
[n] J. D. Mammosser et al., “Fabrication and Testing of Deflecting Cavities for APS”, in Proc. SRF'13, Paris, France, Sep. 2013, paper FRIOA03, pp. 1170-1175.
[n] B. Gkotse, F. Ravotti, G. Pezzullo, and P. Jouvelot, “The IRRAD Data Manager (IDM)”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 317. doi:10.18429/JACoW-ICALEPCS2019-MOPHA048
[n] Y. Nosochkov, P. Raimondi, T. O. Raubenheimer, A. Seryi, and M. Woodley, “Tuning Knobs for the NLC Final Focus”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI047, pp. 476-478.
[n] M. Kuntze, “Developments in Superconducting Slow-Wave Structures”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B06, pp. 86-94.
[n] H. Grote and F. Schmidt, “MAD-X -- An Upgrade from MAD8”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG014, pp. 3497-3499. doi:10.1109/PAC.2003.1289960
[n] H. Okuno, “Experience with Stripping Heavy Ion Beams”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO1AB02, pp. 340-344.
[n] L. Serafini, C. Pagani, and A. Peretti, “Space Charge Compensated RF Gun: A New Way to Ultra High Brightness Electron Beams”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 703-706.
[n] M. Ikegami et al., “Commissioning Plan for the FRIB Driver Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP041, pp. 152-154.
[n] M. Kuntze, “Contribution to the Panel Discussion on Superconducting Linac Development”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 137-139.
[n] G. Lebec, J. Chavanne, C. A. Kitegi, C. Penel, and F. Revol, “First Operational Experience with a Cryogenic Permanent Magnet Undulator at the ESRF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP067, pp. 2414-2416.
[n] N. P. Sobenin, S. V. Ivanov, E. Kaljuzhny, and S. N. Plotnikov, “Theoretical and Experiemental Study of Linear Collider Accelerating Structures Impedance Characteristics”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 892-895.
[n] F. Naito et al., “RF Characteristics of a High-Power Model of the 432 MHz DTL”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-37, pp. 137-139.
[n] M. Vogt, D. H. Kuk, and T. Limberg, “Simulation ofBunching Instability Regimes in the FLASH Bunch Compressors”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC111, pp. 3236-3238.
[n] K. Pepitone, S. Doebert, B. Cadilhon, B. Cassany, and J. Gardelle, “LEETCHI: The High Current Electron Source for the CLIC Drive Beam Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 870-872. doi:10.18429/JACoW-LINAC2016-THPLR013
[n] J. B. Leddy, J. R. Cary, D. M. Cheatham, and D. N. Smithe, “Particle-in-Cell Simulations of Plasma Production in C100 SRF Cavity for in Situ Cleaning”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper THAHC6, unpublished.
[n] K. Honkavaara, B. Faatz, J. Feldhaus, S. Schreiber, R. Treusch, and M. Vogt, “Status of the Soft X-Ray FEL User Facility FLASH”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 61-65. doi:10.18429/JACoW-FEL2015-MOP014
[n] R. E. Abel, D. C. Faircloth, S. R. Lawrie, J. H. Macgregor, and M. Perkins, “A Test Facility for Developments in Ion Source Plasma Power Supplies”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3845-3847. doi:10.18429/JACoW-IPAC2018-THPAL083
[n] S. Amiri, A. Gholampour, M. Jafarzadeh, M. Lamehi, and J. Rahighi, “Helical Undulator as a Source of Spectromicroscopy Beamline of ILSF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4217-4219. doi:10.18429/JACoW-IPAC2016-THPOY049
[n] Y. Nosochkov, P. Raimondi, T. O. Raubenheimer, and A. Seryi, “NLC Luminosity as a Function of Beam Parameters”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI048, pp. 479-481.
[n] S. Fatehi, E. Ahmadi, F. Saeidi, D. Einfeld, and H. Ghasem, “Effects of Multipoles in Dynamic Aperture of the ILSF Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP013, pp. 1632-1634.
[n] O. Kochebina, F. Dieudegard, T. Junquera, and D. Vandeplassche, “Cryogenic Systems Studies for the MINERVA 100 MeV Proton SC LINAC Project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 918-920. doi:10.18429/JACoW-SRF2019-THP033
For LaTeX
Use Complete Form
For BibTeX
References
- M. Johnson, J. Jones, and P. Williams, “Jitter tolerance for the FEBE beamline on CLARA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL143, pp. 2071-2074.
- D. P. Barber, G. H. Hoffstaetter, and M. Vogt, “Polarized Protons in HERA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE049, pp. 302-304.
- T. Morishita et al., “The DTL/SDTL Alignment of the J-PARC Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN060, pp. 1523-1525.
- L. C. Teng and E. A. Crosbie, “Lattice Considerations for a Tau-Charm Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR26, pp. 3415-3417.
- M. T. F. Pivi and T. O. Raubenheimer, “Instability Thresholds and Generation of the Electron-cloud in the GLC/NLC and Tesla Damping Rings”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT159, pp. 2831-2833.
- E. A. Crosbie, “Emittance and Damping of Electrons in the Neighborhood of Resonance Fixed Points”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 506-509.
- A. M. Todd and M. F. Reusch, “RFQ Beam Dynamics Model Development”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU410, pp. 326-328.
- W. B. Lewis, “Future Factory Type Accelerators”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper G-1, pp. 600-605.
- J. Lewellen and J. Smedley, “Concepts for more flexible UED/UEM operation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC61, pp. 2105-2108.
- E. Asseo, G. Baribaud, J. Bosser, J. H. B. Madsen, K. Reich, and H. Van Der Beken, “The Computer Assisted Control and Data Acquisition System for the CERN PS Booster”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 354-359.
- T. Mitsumoto et al., “Design Study of Sector Magnets of Superconducting Ring Cyclotron for the RIKEN RI Beam Factory”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-18, pp. 237-240.
- G. Le Bec, J. Chavanne, L. Lefebvre, D. Martin, and C. Penel, “Magnetic Measurements and Fiducialisation of the ESRF-EBS Magnets”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper THVIR09, pp. XX-XX.
- B. Fernandes, P. Gessler, and C. Youngman, “High Level FPGA Programming Framework Based on Simulink”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC087, pp. 782-785.
- T. Shintake et al., “Development of a Smart Modulator and Efficiency Evaluation of 500 GeV e+e- C-band Linear Collider”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA12, pp. 763-765.
- M. F. Reusch and D. L. Bruhwiler, “Transport of Bunched Beams with Space Charge Through a Periodic Lattice”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPR08, pp. 3257-3259.
- S. Haghtalab, F. Abbasi, F. Ghasemi, M. Jafarzadeh, and M. Lamehi, “Basic Design of Control System for IPM Linear Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4082-4084.
- J. D. Mammosser et al., “Fabrication and Testing of Deflecting Cavities for APS”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper FRIOA03, pp. 1170-1175.
- B. Gkotse, F. Ravotti, G. Pezzullo, and P. Jouvelot, “The IRRAD Data Manager (IDM)”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 317.
- Y. Nosochkov, P. Raimondi, T. O. Raubenheimer, A. Seryi, and M. Woodley, “Tuning Knobs for the NLC Final Focus”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI047, pp. 476-478.
- M. Kuntze, “Developments in Superconducting Slow-Wave Structures”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper B06, pp. 86-94.
- H. Grote and F. Schmidt, “MAD-X -- An Upgrade from MAD8”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAG014, pp. 3497-3499.
- H. Okuno, “Experience with Stripping Heavy Ion Beams”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO1AB02, pp. 340-344.
- L. Serafini, C. Pagani, and A. Peretti, “Space Charge Compensated RF Gun: A New Way to Ultra High Brightness Electron Beams”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 703-706.
- M. Ikegami et al., “Commissioning Plan for the FRIB Driver Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP041, pp. 152-154.
- M. Kuntze, “Contribution to the Panel Discussion on Superconducting Linac Development”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 137-139.
- G. Lebec, J. Chavanne, C. A. Kitegi, C. Penel, and F. Revol, “First Operational Experience with a Cryogenic Permanent Magnet Undulator at the ESRF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP067, pp. 2414-2416.
- N. P. Sobenin, S. V. Ivanov, E. Kaljuzhny, and S. N. Plotnikov, “Theoretical and Experiemental Study of Linear Collider Accelerating Structures Impedance Characteristics”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 892-895.
- F. Naito et al., “RF Characteristics of a High-Power Model of the 432 MHz DTL”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-37, pp. 137-139.
- M. Vogt, D. H. Kuk, and T. Limberg, “Simulation ofBunching Instability Regimes in the FLASH Bunch Compressors”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC111, pp. 3236-3238.
- K. Pepitone, S. Doebert, B. Cadilhon, B. Cassany, and J. Gardelle, “LEETCHI: The High Current Electron Source for the CLIC Drive Beam Injector”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 870-872.
- J. B. Leddy, J. R. Cary, D. M. Cheatham, and D. N. Smithe, “Particle-in-Cell Simulations of Plasma Production in C100 SRF Cavity for in Situ Cleaning”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper THAHC6, unpublished.
- K. Honkavaara, B. Faatz, J. Feldhaus, S. Schreiber, R. Treusch, and M. Vogt, “Status of the Soft X-Ray FEL User Facility FLASH”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 61-65.
- R. E. Abel, D. C. Faircloth, S. R. Lawrie, J. H. Macgregor, and M. Perkins, “A Test Facility for Developments in Ion Source Plasma Power Supplies”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3845-3847.
- S. Amiri, A. Gholampour, M. Jafarzadeh, M. Lamehi, and J. Rahighi, “Helical Undulator as a Source of Spectromicroscopy Beamline of ILSF”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4217-4219.
- Y. Nosochkov, P. Raimondi, T. O. Raubenheimer, and A. Seryi, “NLC Luminosity as a Function of Beam Parameters”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI048, pp. 479-481.
- S. Fatehi, E. Ahmadi, F. Saeidi, D. Einfeld, and H. Ghasem, “Effects of Multipoles in Dynamic Aperture of the ILSF Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP013, pp. 1632-1634.
- O. Kochebina, F. Dieudegard, T. Junquera, and D. Vandeplassche, “Cryogenic Systems Studies for the MINERVA 100 MeV Proton SC LINAC Project”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 918-920.
Back to search