Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. S. Basak et al., “Design and development of AR RF personnel protection and interlock system for RF Test with Access mode to RF cavities in ALS-U project at LBNL”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS125, unpublished.
[n] R. Tanaka et al., “Inauguration of the XFEL Facility, SACLA, in SPring-8”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUDAUST01, pp. 585-588.
[n] D. Bruno, G. Ganetis, W. Louie, and J. Sandberg, “Overview of the AGS Cold Snake Power Supplies and the new RHIC Sextupole Power Supplies”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS090, pp. 637-639.
[n] T. E. Plawski et al., “CEBAF Photo Gun RF System”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 236-238. doi:10.18429/JACoW-LINAC2018-MOPO115
[n] Z. Parsa, “On Beam Emittance and Invariants - Applications to AFT Beamline”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1747-1750.
[n] D. Menut et al., “Design of an Advance Detector Support to Allow High Quality GISAXS/GIWAXS Experiments on the MARS Beamline at SOLEIL”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEPB11, pp. XX-XX.
[n] T. Adachi et al., “A 150MeV FFAG Synchrotron with "Return-Yoke Free" Magnet”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH016, pp. 3254-3256.
[n] M. G. Mazarakis et al., “'Smile'' a New Version for the RADLAC II Linear Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU448, pp. 438-440.
[n] S. M. Polozov et al., “Transport System for Ion Implantation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC155, pp. 439-441.
[n] J. Dey, I. Kourbanis, and D. Wildman, “Improvements in Bunch Coalescing in the Fermilab Main Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ13, pp. 3312-3314.
[n] P. Spentzouris, “Accelerator Modeling under SciDAC: Meeting the Challenges of Next-Generation Accelerator Design, Analysis, and Optimization.”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THMPMP03, pp. 315-320.
[n] V. Kumar, W. M. Fawley, and S. Krishnagopal, “Start-up of an FEL Oscillator from Shot Noise”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA038, pp. 163-165.
[n] K. Fong and D. W. Storey, “Design of an RF Modulated Thermionic Electron Source at TRIUMF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4524-4526. doi:10.18429/JACoW-IPAC2018-THPMK095
[n] K. Ohmi, “Beam-beam Interaction under External Force Oscillation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS057, pp. 736-738.
[n] E. Gray, A. Shapiro, and G. Spalek, “A Radio-Frequency Quadrupole Accelerator Longitudinal Field Stabilizer”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-34, pp. 122-124.
[n] G. A. Decker and O. V. Singh, “Orbit Feedback Using X-ray Beam Position Monitoring at the Advanced Photon Source”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WECI001, pp. XX-XX.
[n] P. Forck, E. Guetlich, R. Haseitl, and P. Kowina, “Scintillation Screen Investigations for High Current Ion Beams at GSI Linac”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF008, pp. 100-104.
[n] C. Mi et al., “A New Bipolar qtrim Power Supply System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3621-3623. doi:10.18429/JACoW-IPAC2015-WEPWI057
[n] T. Kuo et al., “Development of a 15 mA DC H Multicusp Source for Cyclotron Injection”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-16, pp. 420-423.
[n] A. Apollonio, M. Jonker, R. Schmidt, B. Todd, D. Wollmann, and M. Zerlauth, “Update on Predictions for Yearly Integrated Luminosity for HL-LHC based on Expected Machine Availability”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1036-1038. doi:10.18429/JACoW-IPAC2014-TUPRO015
[n] P. D. Hermes et al., “Improved Aperture Measurements at the LHC and Results from their Application in 2015”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1446-1449. doi:10.18429/JACoW-IPAC2016-TUPMW014
[n] J. J. Yang, T. J. Zhang, X. L. Jia, S. Z. An, H. J. Yao And Y, and Z. Lin, “Investigation Of Intense Beam Transport On Injection Line And Inflector Of Compact Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 352-354.
[n] L. X. Yan et al., “Ultrashort Electron Bunch Train Production by UV Laser Pulse Stacking”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD051, pp. 3210-3212.
[n] T. D'Ottavio, P. S. Dyer, J. Piacentino, and M. R. Tomko, “Experience Using NuPIC to Detect Anomalies in Controls Data”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1619. doi:10.18429/JACoW-ICALEPCS2019-THCPL07
[n] T. Chanwattana, R. Bartolini, and A. Seryi, “Studies on LPWA-based Light Sources driven by a Transverse Gradient Undulator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2937-2939. doi:10.18429/JACoW-IPAC2014-THPRO032
[n] M. Arnold et al., “ERL Operation of S-DALINAC”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 1-4. doi:10.18429/JACoW-ERL2019-MOCOXBS02
[n] N. Hauser, S. Wimalaratne, and C. U. Felzmann, “ANSTO, Australian Synchrotron, Metadata Catalogues and the Australian National Data Service”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUMIB05, pp. 529-531.
For LaTeX
Use Complete Form
For BibTeX
References
- S. S. Basak et al., “Design and development of AR RF personnel protection and interlock system for RF Test with Access mode to RF cavities in ALS-U project at LBNL”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS125, this conference.
- R. Tanaka et al., “Inauguration of the XFEL Facility, SACLA, in SPring-8”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUDAUST01, pp. 585-588.
- D. Bruno, G. Ganetis, W. Louie, and J. Sandberg, “Overview of the AGS Cold Snake Power Supplies and the new RHIC Sextupole Power Supplies”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS090, pp. 637-639.
- T. E. Plawski et al., “CEBAF Photo Gun RF System”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 236-238.
- Z. Parsa, “On Beam Emittance and Invariants - Applications to AFT Beamline”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1747-1750.
- D. Menut et al., “Design of an Advance Detector Support to Allow High Quality GISAXS/GIWAXS Experiments on the MARS Beamline at SOLEIL”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEPB11, pp. XX-XX.
- T. Adachi et al., “A 150MeV FFAG Synchrotron with "Return-Yoke Free" Magnet”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH016, pp. 3254-3256.
- M. G. Mazarakis et al., “'Smile'' a New Version for the RADLAC II Linear Accelerator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU448, pp. 438-440.
- S. M. Polozov et al., “Transport System for Ion Implantation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC155, pp. 439-441.
- J. Dey, I. Kourbanis, and D. Wildman, “Improvements in Bunch Coalescing in the Fermilab Main Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ13, pp. 3312-3314.
- P. Spentzouris, “Accelerator Modeling under SciDAC: Meeting the Challenges of Next-Generation Accelerator Design, Analysis, and Optimization.”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper THMPMP03, pp. 315-320.
- V. Kumar, W. M. Fawley, and S. Krishnagopal, “Start-up of an FEL Oscillator from Shot Noise”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA038, pp. 163-165.
- K. Fong and D. W. Storey, “Design of an RF Modulated Thermionic Electron Source at TRIUMF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4524-4526.
- K. Ohmi, “Beam-beam Interaction under External Force Oscillation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS057, pp. 736-738.
- E. Gray, A. Shapiro, and G. Spalek, “A Radio-Frequency Quadrupole Accelerator Longitudinal Field Stabilizer”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-34, pp. 122-124.
- G. A. Decker and O. V. Singh, “Orbit Feedback Using X-ray Beam Position Monitoring at the Advanced Photon Source”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WECI001, pp. XX-XX.
- P. Forck, E. Guetlich, R. Haseitl, and P. Kowina, “Scintillation Screen Investigations for High Current Ion Beams at GSI Linac”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF008, pp. 100-104.
- C. Mi et al., “A New Bipolar qtrim Power Supply System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3621-3623.
- T. Kuo et al., “Development of a 15 mA DC H Multicusp Source for Cyclotron Injection”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper G-16, pp. 420-423.
- A. Apollonio, M. Jonker, R. Schmidt, B. Todd, D. Wollmann, and M. Zerlauth, “Update on Predictions for Yearly Integrated Luminosity for HL-LHC based on Expected Machine Availability”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1036-1038.
- P. D. Hermes et al., “Improved Aperture Measurements at the LHC and Results from their Application in 2015”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1446-1449.
- J. J. Yang, T. J. Zhang, X. L. Jia, S. Z. An, H. J. Yao And Y, and Z. Lin, “Investigation Of Intense Beam Transport On Injection Line And Inflector Of Compact Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 352-354.
- L. X. Yan et al., “Ultrashort Electron Bunch Train Production by UV Laser Pulse Stacking”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD051, pp. 3210-3212.
- T. D'Ottavio, P. S. Dyer, J. Piacentino, and M. R. Tomko, “Experience Using NuPIC to Detect Anomalies in Controls Data”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1619.
- T. Chanwattana, R. Bartolini, and A. Seryi, “Studies on LPWA-based Light Sources driven by a Transverse Gradient Undulator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2937-2939.
- M. Arnold et al., “ERL Operation of S-DALINAC”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 1-4.
- N. Hauser, S. Wimalaratne, and C. U. Felzmann, “ANSTO, Australian Synchrotron, Metadata Catalogues and the Australian National Data Service”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUMIB05, pp. 529-531.
Back to search