Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Gerhan et al., “Studies of Niobium Thin Films Deposited by Coaxial Energetic Deposition”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP61, pp. 384-384.
[n] R. E. Laxdal et al., “Extraction Exploiting nu;r = 3/2: Optical and Technical Constraints on Performance”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper G-08, pp. 248-251.
[n] C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2561-2564. doi:10.18429/JACoW-IPAC2016-WEPMY009
[n] M. G. Fedurin, Y. C. Jing, D. Stratakis, and C. Swinson, “BNL ATF II Beamlines Design”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1445-1447. doi:10.18429/JACoW-IPAC2015-TUPWA020
[n] H. Wang, T. E. Plawski, R. A. Rimmer, A. Dudas, and M. L. Neubauer, “Simulation and Experimental Studies of a 2.45GHz Magnetron Source for an SRF Cavity with Field Amplitude and Phase Controls”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 514-517. doi:10.18429/JACoW-IPAC2016-MOPMY002
[n] R. Giannini and P. Mandrillon, “On the Possibility of Accelerating Multiply Charged Ions in the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-07, pp. 609-613.
[n] G. Sterbini, S. Doebert, R. L. Lillestol, E. Marin, D. Schulte, and E. Adli, “Beam-based Alignment in CTF3 Test Beam Line”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR034, pp. 1894-1896.
[n] D. B. Dobson, A. J. Churby, and E. K. Krieger, “Managing a Product Called NIF - PLM Current State and Processes”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC090, pp. 310-313.
[n] S. M. Reisdorf and D. A. Potter, “NIF Electronic Operations: Improving Productivity with iPad Application Development”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB07, pp. 1066-1069.
[n] E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623.
[n] F. Bulos et al., “Some Fast Beam Kicker Magnet Systems at SLAC”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1884-1887.
[n] A. R. Donaldson, “Modulator Reliability and Bandwidth Improvement: Replacing Tetrodes with MOSFETs”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H09, pp. 284-286.
[n] B. Kalantari and T. Korhonen, “Beam Synchronous Data Acquisition for SwissFEL Test Injector”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS011, pp. 180-182.
[n] V. V. Peplov, D. E. Anderson, R. I. Cutler, M. Wezensky, J. D. Hicks, and R. B. Saethre, “SNS Linac Modulator Operational History and Performance”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP275, pp. 1340-1342.
[n] Z. A. Conway, K. W. Shepard, M. P. Kelly, J. D. Fuerst, and M. Kedzie, “Mechanical Properties of Spoke Resonators”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA06, pp. 185-187.
[n] G. K. Brunton et al., “Shot Rate Improvement Strive for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 56-59. doi:10.18429/JACoW-ICALEPCS2015-MOD3O03
[n] R. L. Witkover, D. S. Barton, and R. K. Reece, “Conversion of the AGS Linac to H- Acceleration”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3010-3013.
[n] P. Reinhardt-Nikulin, S. Bragin, and N. Ilinsky, “Method of Longitudinal Impedance Measurement for Accelerator Elements in Wide Frequency Region Using Double Fourier Transform”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1014-1017.
[n] W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0035, pp. 424-426.
[n] W. Fu, J. Morris, and S. Nemesure, “Asynchronous Data Change Notification between Database Server and Accelerator Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN021, pp. 144-146.
[n] R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1666-1669.
[n] E. R. Beadle, G. W. Bennett, and R. L. Witkover, “The AGS Booster Beam Loss Monitor System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1231-1234.
[n] R. Baartman, K. R. Kendall, M. McDonald, P. W. Schmor, and D. Yuan, “An Intense Ion Source for H- Cyclotrons”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 283-286.
[n] D. Sun, F. R. Huson, and W. W. MacKay, “Voltage Breakdown Test at 473 MHz”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO460, pp. 216-218.
[n] L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
[n] G. Marcus et al., “Regenerative Amplification for a Hard X-Ray Free-Electron Laser”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 118-121. doi:10.18429/JACoW-FEL2019-TUP032
[n] M. Turner et al., “Compact Ring-Based X-Ray Source With on-Orbit and on-Energy Laser-Plasma Injection”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 435-438. doi:10.18429/JACoW-NAPAC2016-TUA3CO03
For LaTeX
Use Complete Form
For BibTeX
References
- A. Gerhan et al., “Studies of Niobium Thin Films Deposited by Coaxial Energetic Deposition”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP61, pp. 384-384.
- R. E. Laxdal et al., “Extraction Exploiting nu;r = 3/2: Optical and Technical Constraints on Performance”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper G-08, pp. 248-251.
- C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2561-2564.
- M. G. Fedurin, Y. C. Jing, D. Stratakis, and C. Swinson, “BNL ATF II Beamlines Design”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1445-1447.
- H. Wang, T. E. Plawski, R. A. Rimmer, A. Dudas, and M. L. Neubauer, “Simulation and Experimental Studies of a 2.45GHz Magnetron Source for an SRF Cavity with Field Amplitude and Phase Controls”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 514-517.
- R. Giannini and P. Mandrillon, “On the Possibility of Accelerating Multiply Charged Ions in the CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-07, pp. 609-613.
- G. Sterbini, S. Doebert, R. L. Lillestol, E. Marin, D. Schulte, and E. Adli, “Beam-based Alignment in CTF3 Test Beam Line”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR034, pp. 1894-1896.
- D. B. Dobson, A. J. Churby, and E. K. Krieger, “Managing a Product Called NIF - PLM Current State and Processes”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC090, pp. 310-313.
- S. M. Reisdorf and D. A. Potter, “NIF Electronic Operations: Improving Productivity with iPad Application Development”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB07, pp. 1066-1069.
- E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623.
- F. Bulos et al., “Some Fast Beam Kicker Magnet Systems at SLAC”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1884-1887.
- A. R. Donaldson, “Modulator Reliability and Bandwidth Improvement: Replacing Tetrodes with MOSFETs”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H09, pp. 284-286.
- B. Kalantari and T. Korhonen, “Beam Synchronous Data Acquisition for SwissFEL Test Injector”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS011, pp. 180-182.
- V. V. Peplov, D. E. Anderson, R. I. Cutler, M. Wezensky, J. D. Hicks, and R. B. Saethre, “SNS Linac Modulator Operational History and Performance”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP275, pp. 1340-1342.
- Z. A. Conway, K. W. Shepard, M. P. Kelly, J. D. Fuerst, and M. Kedzie, “Mechanical Properties of Spoke Resonators”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA06, pp. 185-187.
- G. K. Brunton et al., “Shot Rate Improvement Strive for the National Ignition Facility (NIF)”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 56-59.
- R. L. Witkover, D. S. Barton, and R. K. Reece, “Conversion of the AGS Linac to H- Acceleration”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3010-3013.
- P. Reinhardt-Nikulin, S. Bragin, and N. Ilinsky, “Method of Longitudinal Impedance Measurement for Accelerator Elements in Wide Frequency Region Using Double Fourier Transform”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1014-1017.
- W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0035, pp. 424-426.
- W. Fu, J. Morris, and S. Nemesure, “Asynchronous Data Change Notification between Database Server and Accelerator Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN021, pp. 144-146.
- R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1666-1669.
- E. R. Beadle, G. W. Bennett, and R. L. Witkover, “The AGS Booster Beam Loss Monitor System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1231-1234.
- R. Baartman, K. R. Kendall, M. McDonald, P. W. Schmor, and D. Yuan, “An Intense Ion Source for H- Cyclotrons”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 283-286.
- D. Sun, F. R. Huson, and W. W. MacKay, “Voltage Breakdown Test at 473 MHz”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO460, pp. 216-218.
- L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
- G. Marcus et al., “Regenerative Amplification for a Hard X-Ray Free-Electron Laser”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 118-121.
- M. Turner et al., “Compact Ring-Based X-Ray Source With on-Orbit and on-Energy Laser-Plasma Injection”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 435-438.
Back to search