JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. E. Montanari, A. Bazzani, M. Giovannozzi, and G. Turchetti, “Using Dynamic Indicators for Probing Single-Particle Stability in Circular Accelerators”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 168-171. doi:10.18429/JACoW-IPAC2022-MOPOST042
[n]	P. Raimondi, P. Tenenbaum, M. Ross, R. Iverson, D. McCormick, and K. Jobe, “Single Pulse Damage in Copper”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOA06, pp. 47-49. 
[n]	D.-O. Jeon and J.-H. Jang, “Dominance of particle resonances over parametric instabilities in high-intensity linacs”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB040, unpublished. 
[n]	Z. Wang, “Generating isolated attosecond soft x-ray free electron laser with optical beat lasers”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL076, unpublished. 
[n]	A. Daneels et al., “CASE in CERN’s Accelerator Sector”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 528-534. doi:10.18429/JACoW-ICALEPCS1991-S15CSE01
[n]	M. O. Hyun, “Mode Analysis of Single Spoke Resonator Type-2 (SSR2) for RISP”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 174-177. doi:10.18429/JACoW-HIAT2022-FR1C3
[n]	Y. Qin, Y. Wang, Y. Du, and Z. Dong, “Electron beam dynamics simulations in electron gun and fabrication of cold field emitters by electrochemical etching”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 660-663. doi:10.18429/JACoW-IPAC2024-MOPR87
[n]	R. K. Jobe, M. Ross, and R. E. Stege, “Using Transient Waveform Recorders to Measure and Store Beam Parameters”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2234-2237. 
[n]	J. H. Han, “Design of a 1 kHz Repetition Rate S-Band Photoinjector”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP105, pp. 977-979. 
[n]	K. Oide and K. L. F. Bane, “Simulations of the Longitudinal Instability in the SLC Damping Rings”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3339-3342. 
[n]	M. Giovannozzi and F. Schmidt, “General Normal Form Procedure to Correct Tune-Shift and Non-Linear Chromaticity for Large Accelerators like the LHC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 500-503. 
[n]	Y. Li, R. S. Rainer, V. V. Smaluk, and D. Xu, “Nonlinear Optics From Hybrid Dispersive Orbits”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 62-65. doi:10.18429/JACoW-FLS2023-TU1B3
[n]	C. Compton et al., “Prototyping of a Superconducting Elliptical Cavity for a Proton Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP076, pp. 758-760. 
[n]	C. Emma et al., “PAX: A Plasma-Driven Attosecond X-Ray Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2755-2758. doi:10.18429/JACoW-IPAC2021-WEPAB072
[n]	A. Brandt, “LLRF Systems for Modern Linacs: Design and Performance”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper WE2003, pp. 498-500. 
[n]	J. R. Delayen, “Applications of Spoke Cavities”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TU302, pp. 377-381. 
[n]	A. Lokey and S. M. Lidia, “Status of Gas Sheet Monitor for Profile Measurements at FRIB”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 410-412. doi:10.18429/JACoW-IBIC2023-WEP027
[n]	R. W. Assmann, “Welcome to IPAC??20 and Opening Remarks by the SPC Chairman”, in Proc. IPAC'20, Caen, France, May 2020, paper MOOR02, pp. XX-XX. 
[n]	G. Adam, A. W. Cross, B. L. Militsyn, and L. Zhang, “Beam Dynamic Analysis of RF Modulated Electron Beam Produced by Gridded Thermionic Guns”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3618-3621. doi:10.18429/JACoW-IPAC2021-WEPAB385
[n]	N. Thompson, “Taper-enhanced high-brightness SASE for stable temporally coherent HXR FEL pulses”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1786-1789. doi:10.18429/JACoW-IPAC2023-TUPL007
[n]	A. Latina et al., “A Compact Inverse Compton Scattering Source Based on X-band Technology and Cavity-enhanced High Average Power Ultrafast Lasers”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 257-260. doi:10.18429/JACoW-FLS2023-TH4A2
[n]	M. C. Ross, “Linac R&D for the ILC Technical Design Report”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TU201, pp. 359-359. 
[n]	M. Coku and N. Thompson, “Investigation of attosecond pulse generation schemes for UK XFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1913-1915. doi:10.18429/JACoW-IPAC2023-TUPL072
[n]	C. M. Garcia Jaimes, L. van Riesen-Haupt, M. Seidel, R. Tomas, and T. Pieloni, “First FCC-ee lattice designs with Nested Magnets”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2477-2480. doi:10.18429/JACoW-IPAC2024-WEPR10
[n]	S. Nagaitsev, “On the Longitudinal Stability of Cooled Coasting Ion Beams”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3524-3527. 
[n]	G. Ciovati and P. Kneisel, “Investigation of Hot Spots as a Function of Material Removal in a Large-grain Niobium Cavity”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP035, pp. 324-326. 
[n]	G. Di Pirro et al., “Centralized Multiprocessor Control System for the Frascati Storage Rings DA{Φ}NE”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 128-130. doi:10.18429/JACoW-ICALEPCS1991-S03SRD06
[n]	Z. Mu et al., “The 648 MHz klystron power source system of CSNS-II Linac superconducting ellipsoid cavity”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 699-701. doi:10.18429/JACoW-LINAC2024-THPB032
[n]	A. Grudiev and W. Wuensch, “Design of the CLIC Main Linac Accelerating Structure for CLIC Conceptual Design Report”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP068, pp. 211-213. 
[n]	G. Ciovati, P. Kneisel, S. Chattopadhyay, and G. Myneni, “Performances of High-Purity Niobium Cavities with Different Grain Sizes”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP033, pp. 318-320. 
[n]	J. S. Sekutowicz, “HOM Damping and Power Extraction from Superconducting Cavities”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper WE2005, pp. 506-510. 
[n]	A. V. Aleksandrov, “6D and High Dynamic Range Measurements of Hadron Beam Phase-Space”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper TH2I01, unpublished. 
[n]	D. Gonnella, “Developments in SRF Technology for Light Source Applications”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper TU3D1, unpublished. 
[n]	H. Weise, “The TTF/VUV-FEL (FLASH) as the Prototype for the European XFEL Project”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper WE1003, pp. 486-490. 
[n]	T. E. Thompson, A. V. Aleksandrov, T. V. Gorlov, K. J. Ruisard, and A. P. Shishlo, “Effect of Three-Dimensional Quadrupole Magnet Model on Beam Dynamics in the FODO Line at the Spallation Neutron Source Beam Test Facility”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 65-67. doi:10.18429/JACoW-HB2023-TUC1C1
[n]	S. Joly, M. Migliorati, N. Mounet, and B. Salvant, “Update of the Transverse Proton Synchrotron Impedance Model”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3149-3152. doi:10.18429/JACoW-IPAC2021-WEPAB224
[n]	A. V. Aleksandrov, “Overview and Future Demands of Fast Choppers”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper WE104, pp. 689-693. 
[n]	C. Bracco, S. C. P. Albright, F. Asvesta, G. P. Di Giovanni, and F. Roncarolo, “Shaping High Brightness and Fixed Target Beams with the CERN PSB Charge Exchange Injection”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 135-140. doi:10.18429/JACoW-HB2023-TUC3I2
[n]	M. Liepe, “Cryomodules for Energy-Recovery Linacs”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper WE1004, pp. 491-491. 
[n]	C. Carli et al., “Neutrino generated radiation from a high energy muon collider”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 925-928. doi:10.18429/JACoW-IPAC2023-MOPL166
[n]	L. M. Young, “Segmented Resonantly Coupled Radio-Frequency Quadrupole (RFQ)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3136-3139. 
[n]	G. Lerner, A. Frasca, A. Lechner, C. Carli, C. Ahdida, and J. Manczak, “FLUKA simulations of neutrino-induced effective dose at a Muon Collider”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2540-2543. doi:10.18429/JACoW-IPAC2024-WEPR27
[n]	C. E. Montanari, A. Bazzani, and M. Giovannozzi, “Diffusive Models for Nonlinear Beam Dynamics”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1976-1979. doi:10.18429/JACoW-IPAC2021-TUPAB233
[n]	S. Nagaitsev, “Fermilab's Project X”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper WE203, pp. 714-714. 
[n]	J. R. Delayen and S. U. De Silva, “Design Sensitivities of the Superconducting Parallel-Bar Cavity”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP024, pp. 812-814. 
[n]	J. H. Han, “Design of a 10 fs Electron Beam with a Photocathode RF Gun and an RF Buncher”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP106, pp. 980-982. 
[n]	D. McNanney et al., “An approachable beam loss monitor configuration and operation tool for FRIB”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3405-3408. doi:10.18429/JACoW-IPAC2024-THPG61
[n]	M. Vretenar, “Status of Linac4 Construction at CERN”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper WE103, pp. 684-688. 
[n]	Y. Iwashita et al., “Tests of Superconducting Materials in a High-Q RF Cavity”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP027, pp. 305-305. 
[n]	Z. Zhang et al., “Update in the optics design of monochromatization interaction region for direct Higgs s-channel production at FCC-ee”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2520-2523. doi:10.18429/JACoW-IPAC2024-WEPR21
[n]	B. L. Militsyn, “Electron RF Injectors for Next Generation FELs”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper TU3D5, unpublished. 
[n]	Z. Wang, “The progress of CiADS linac and first beam acceleration”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUZA003, unpublished. 
[n]	L. T. Sun, Y. C. Feng, W. Lu, C. Qian, and H. W. Zhao, “Intense Highly Charged Ion Beams Operation for Heavy Ion Accelerators at IMP”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper TUA3C1, unpublished. 
[n]	H. Burkhardt, B. Goddard, Y. Kadi, V. Kain, T. Risselada, and W. J. M. Weterings, “Collimation in the Transfer Lines to the LHC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP009, pp. 1135-1137. 
[n]	J.-F. Ostiguy, “Magnet End Design: The Main Injector Dipoles”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2354-2357. 
[n]	S. Park, “The SSRL Linacs for Injection to the Storage Ring and RF Gun Testing”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP66, pp. 222-224. 
[n]	J. A. Uythoven, J. I. M. Botman, and H. L. Hagedoorn, “Analytical Evaluation of Synchrotron Radiation Integrals for Isomagnetic Lattices with Rectangular Dipole Magnets”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 649-651. 
[n]	D. Newton, “Modelling Synchrotron Radiation from Realistic and Ideal Long Undulator Systems”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD044, pp. 3189-3191. 
[n]	H. Burkhardt, B. Goddard, Y. Kadi, V. Kain, and W. J. M. Weterings, “Collimation in the Transfer Lines to the LHC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT012, pp. 554-556. 
[n]	V. V. Kubarev, S. Bae, Ya. V. Getmanov, Y. U. Jeong, and O. A. Shevchenko, “Fine and Hyperfine Structure of FEL Emission Spectra”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 276-281. doi:10.18429/JACoW-FEL2019-TUD03

For LaTeX

Use Complete Form

For BibTeX

References

Back to search