Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Kondo et al., “A 3-MeV Linac for Development of Accelerator Components at J-PARC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 298-300. doi:10.18429/JACoW-LINAC2016-MOPLR071
[n] H. Takahashi, T. Kojima, S. Maebara, T. Narita, H. Sakaki, and K. Tsutsumi, “Present Status of MPS and TS for IFMIF/EVEDA Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB006, pp. 2695-2697.
[n] M. M. Kirk, D. Ondreka, and P. J. Spiller, “SIS-18 RF Knock-Out Optimization Studies”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI007, pp. 297-299.
[n] V. Vogel et al., “Status of the Klystrons for the European XFEL after Commissioning and First User Operation Phase”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 420-422. doi:10.18429/JACoW-FEL2019-WEP045
[n] E. Paoloni, S. Bettoni, M. E. Biagini, and P. Raimondi, “Magnetic Design Studies for the Final Focus Quadrupoles of the SuperB Large Crossing Angle Collision Scheme”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD002, pp. 2401-2403.
[n] T. Kasuga and H. Yonehara, “Suppression of Longitudinal Coupled-Bunch Instability in UVSOR”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 918-921.
[n] A. Brachmann et al., “Surface Characterization of the LCLS RF Gun Cathode”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE065, pp. 2284-2286.
[n] D. Proch, “Activities with Superconducting Cavities at DESY”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA005, pp. 19-23.
[n] S. Kurz and S. Russenschuck, “Accurate Calculation of Magnetic Fields in the End Regions of Superconducting Accelerator Magnets Using the BEM-FEM Coupling Method”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA89, pp. 2796-2798.
[n] M. Chen, C. A. Cooper, and L. Ristori, “Multistep Mechanical Analyses of Centrifugal Barrel Polishing Barrel and Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO054, pp. 2426-2428.
[n] H. C. Jung, J. Joo, J. Lee, R. E. Laxdal, and Z. Y. Yao, “SRF Cavities for RAON”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2200-2201. doi:10.18429/JACoW-IPAC2016-WEPMB035
[n] F. H. Munson, D. E. R. Quock, S. L. Dean, and K. J. Eder, “First Experiences Integrating PC Distributed I/O Into Argonne's ATLAS Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUCT002, pp. XX-XX.
[n] F. Ludwig et al., “Drift Calibration Techniques for Future FELs”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA041, pp. 1419-1421.
[n] A. N. Pham et al., “Design of a Compact All-Permanent Magnet ECR Ion Source Injector for ReA at MSU NSCL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4054-4056. doi:10.18429/JACoW-IPAC2015-THPF141
[n] Y. El-Hayek, M. M. Kirk, D. Ondreka, P. J. Spiller, and U. Ratzinger, “Initial Beam Loss and Control of Dynamic Vacuum Effects in SIS18”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI010, pp. 300-302.
[n] L. Ristori and W. F. Toter, “Development at ANL of a Copper-brazed Joint for the Coupling of the Niobium Cavity End Wall to the Stainless Steel Helium Vessel in the Fermilab SSR1 Resonator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC058, pp. 2345-2347.
[n] B. Yildirim, E. M. Apostolov, S. Choroba, V. V. Katalev, P. Morozov, and Y. Nachtigal, “RF Power Waveguide Distribution for the RF Gun of the European XFEL at DESY”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 434-436. doi:10.18429/JACoW-FEL2019-WEP049
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Kondo et al., “A 3-MeV Linac for Development of Accelerator Components at J-PARC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 298-300.
- H. Takahashi, T. Kojima, S. Maebara, T. Narita, H. Sakaki, and K. Tsutsumi, “Present Status of MPS and TS for IFMIF/EVEDA Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB006, pp. 2695-2697.
- M. M. Kirk, D. Ondreka, and P. J. Spiller, “SIS-18 RF Knock-Out Optimization Studies”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI007, pp. 297-299.
- V. Vogel et al., “Status of the Klystrons for the European XFEL after Commissioning and First User Operation Phase”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 420-422.
- E. Paoloni, S. Bettoni, M. E. Biagini, and P. Raimondi, “Magnetic Design Studies for the Final Focus Quadrupoles of the SuperB Large Crossing Angle Collision Scheme”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD002, pp. 2401-2403.
- T. Kasuga and H. Yonehara, “Suppression of Longitudinal Coupled-Bunch Instability in UVSOR”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 918-921.
- A. Brachmann et al., “Surface Characterization of the LCLS RF Gun Cathode”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE065, pp. 2284-2286.
- D. Proch, “Activities with Superconducting Cavities at DESY”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOA005, pp. 19-23.
- S. Kurz and S. Russenschuck, “Accurate Calculation of Magnetic Fields in the End Regions of Superconducting Accelerator Magnets Using the BEM-FEM Coupling Method”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA89, pp. 2796-2798.
- M. Chen, C. A. Cooper, and L. Ristori, “Multistep Mechanical Analyses of Centrifugal Barrel Polishing Barrel and Cavity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO054, pp. 2426-2428.
- H. C. Jung, J. Joo, J. Lee, R. E. Laxdal, and Z. Y. Yao, “SRF Cavities for RAON”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2200-2201.
- F. H. Munson, D. E. R. Quock, S. L. Dean, and K. J. Eder, “First Experiences Integrating PC Distributed I/O Into Argonne's ATLAS Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUCT002, pp. XX-XX.
- F. Ludwig et al., “Drift Calibration Techniques for Future FELs”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA041, pp. 1419-1421.
- A. N. Pham et al., “Design of a Compact All-Permanent Magnet ECR Ion Source Injector for ReA at MSU NSCL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4054-4056.
- Y. El-Hayek, M. M. Kirk, D. Ondreka, P. J. Spiller, and U. Ratzinger, “Initial Beam Loss and Control of Dynamic Vacuum Effects in SIS18”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI010, pp. 300-302.
- L. Ristori and W. F. Toter, “Development at ANL of a Copper-brazed Joint for the Coupling of the Niobium Cavity End Wall to the Stainless Steel Helium Vessel in the Fermilab SSR1 Resonator”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC058, pp. 2345-2347.
- B. Yildirim, E. M. Apostolov, S. Choroba, V. V. Katalev, P. Morozov, and Y. Nachtigal, “RF Power Waveguide Distribution for the RF Gun of the European XFEL at DESY”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 434-436.
Back to search
