Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. W. Thomae, J. L. Conradie, D. T. Fourie, and D. Kuchler, “Beam Experiments with the Grenoble Test Electron Cyclotron Resonance Ion Source at iThemba LABS”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP14, pp. 68-70.
[n] J. P. Morgan, B. E. Drendel, and D. Vander Meulen, “Improvements to Antiproton Accumulator to Recycler Transfers at the Fermilab Tevatron Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP032, pp. 1608-1610.
[n] S. Hillert et al., “The Beam Trajectory Monitor for the TTF-FEL at DESY”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B11, pp. 1803-1805.
[n] H. Zhang et al., “First measurement of the proton beam and lead ion beam in the LHC using beam gas curtain monitor”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THAD2, unpublished.
[n] E. Hemsing, A. Marinelli, and J. B. Rosenzweig, “Generation of Optical Orbital Angular Momentum in a Free-electron Laser”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE063, pp. 2278-2280.
[n] O. Piquet et al., “RF Conditionning of the Spiral 2 CW RFQ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4114-4117. doi:10.18429/JACoW-IPAC2017-THPIK005
[n] S. Tariq, K. Ammigan, P. Hurh, P. Liu, R. Schultz, and J. Shang, “Li Material Testing- Fermilab Antiproton Source Lithium Collection Lens”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG013, pp. 1452-1454.
[n] H. Leboutet, J. Aucouturier, and J. C. Schnuriger, “I. Use of the Hodoscope to Measure the Axial Frequency of Betatron Oscillations; II. The Accelerating System of the Grenoble Isochronous Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F04, pp. XX-XX.
[n] J. B. González Fernández, V. H. Haghighat, S. A. McDonald, K. Nygård, and L. K. Roslund, “ForMAX: A Beamline for Multi-Scale and Multi-Modal Structural Characterisation of Hierarchical Materials”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 15-18. doi:10.18429/JACoW-MEDSI2023-TUOBM01
[n] M. Clausen, R. MacKenzie, R. Sass, H. Shoaee, K. Underwood, and G. White, “AIDA - Accelerator Integrated Data Access”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP011, pp. XX-XX.
[n] G. N. Minerbo, R. A. Jameson, and O. R. Sander, “Four-Dimensional Beam Tomography”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2231-2234.
[n] L. I. Donley, J. C. Dooling, and G. E. McMichael, “Using Ferrite as a Fast Switch for Improving Rise Time of IPNS Extraction Kicker”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE034, pp. 1159-1161.
[n] B. P. Wang et al., “Study of the Signal Processing System for a Cavity Beam Position MonitorS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR035, pp. 855-857.
[n] Y. K. Wu, S. Hartman, and S. F. Mikhailov, “A Physics Based Control System for the Duke Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB033, pp. 2482-2484.
[n] K. Takayama et al., “Induction Accelerating Devices for Induction Synchrotrons and the Superbunch VLHC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI075, pp. 1001-1003.
[n] R. W. Thomae et al., “The FOM-MEQALAC System: The RF Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0012, pp. 118-120.
[n] R. S. Lord et al., “Coupled Operation of the Oak Ridge Isochronous Cyclotron and the 25 MV Tandem”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2083-2086.
[n] S. Kumar and A. Mandal, “Start to End Simulation of High Current Injector using TRACEWIN Code”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 223-225. doi:10.18429/JACoW-IPAC2015-MOPWA047
[n] P. N. Prakash, K. K. Mistri, A. Roy, J. Sacharias, and S. S. Sonti, “Superconducting Low Beta Niobium Resonator for Heavy Ions”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB049, pp. 588-590.
[n] I. Y. Lee, J. A. Martin, J. B. McGrory, W. T. Milner, D. K. Olsen, and G. R. Young, “Lattice Design of HISTRAP: Heavy Ion Storage Ring for Atomic Physics”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 310-313.
[n] L. David, E. Lecorche, T. T. Luong, and M. Ulrich, “The GANIL Computer Control System Renewal”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 830-833.
[n] M. Hachmann and K. Floettmann, “Transverse Emittance Measurement at REGAE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 837-840. doi:10.18429/JACoW-IPAC2015-MOPHA027
[n] W. Booth, E. B. Blanco Vinuela, B. Bradu, L. Gomez Palacin, M. Quilichini, and D. Willeman, “Re-Engineering Control Systems using Automatic Generation Tools and Process Simulation: the LHC Water Cooling Case”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC076, pp. 1242-1245.
[n] E. B. Akubakirov et al., “Generation and Acceleration of High-current Annular Electron Beam in Linear Induction Accelerator and Microwave Power from Cherenkov TWT”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 34-37.
[n] I. V. Kalagin, S. N. Dmitriev, B. Gikal, and G. Gulbekyan, “Status of the FLNR JINR Cyclotrons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP099, pp. 5011-5013.
[n] H. Zen et al., “Present Status of Mid-infrared Free Electron Laser Facility in Kyoto University”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA013, pp. 1190-1192.
[n] M. H. Burt et al., “An Improved Polarisation Analyser for the I16 Beamline at Diamond”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 346-348. doi:10.18429/JACoW-MEDSI2018-THPH05
[n] H. Gundel, H. Henke, H. Heydari, K. Schmidt, and D. Suchland, “Profile Measurements on a Pulsed Ferroelectric Electron Beam”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1023-1026.
[n] M. Martinello et al., “Tailoring Surface Impurity Content to Maximize Q-factors of Superconducting Resonators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2258-2261. doi:10.18429/JACoW-IPAC2016-WEPMR003
[n] J. J. Petillo et al., “The MICHELLE Electron Gun and Collector Modeling Tool”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH090, pp. 3054-3056.
[n] U. Klein, M. Peiniger, and H. Vogel, “RF Superconductivity at Interatom”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G08, pp. XX-XX.
[n] E. Takada and T. Kondo, “Synchrotron Control System of HIMAC”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP014, pp. XX-XX.
[n] Z. Yin, Y. Wu, and J. F. Zhang, “Design and Experiment of the BEPCII IR Conventional Dual Aperture Quadrupole”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper MPPT002, unpublished.
[n] R. MacGill and R. Yourd, “Mechanical Design of a Heavy Ion RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3004-3007.
[n] C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
[n] J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 79-83. doi:10.18429/JACoW-RUPAC2016-WEYMH02
[n] M. B. Shrader and D. H. Preist, “Compact High Efficiency, Lightweight 200-800 MHz High Power RF Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2751-2754.
[n] V. A. Andreev and G. Parisi, “Field Stabilization and End-Cell Tuning in a 4-vane RFQ”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1300-1303.
[n] B. Dwersteg, G. Kreps, and A. Matheisen, “Operating Experience with Superconducting Cavities in HERA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2039-2042.
[n] Q. S. Shu et al., “The Effects of Exposing Well Processed RF Surfaces of Superconducting Cavities to Various Media”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G10, pp. XX-XX.
[n] M. Peiniger, C. Piel, H. Vogel, and P. vom Stein, “A 100 MeV Injector Linac for the Swiss Light Source Supplied by Industry”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA56, pp. 3510-3512.
[n] R. E. Worsham, “Stability and Tolerance of the Separated Orbit Cyclotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 644-648.
[n] E. Karantzoulis and M. Plesko, “Macmon: A Monitoring Program for ELETTRA”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR12, pp. 2262-2264.
[n] E. Shaposhnikova, P. Baudrenghien, T. Bohl, T. Linnecar, and J. Tuckmantel, “Nominal Longitudinal Parameters for the LHC Beam in the CERN SPS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB015, pp. 3050-3052.
[n] R. J. Pasquinelli et al., “A 1.7 GHz Waveguide Schottky Detector System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB023, pp. 3068-3070.
[n] E. D. Hudson, F. Irwin, M. L. Mallory, J. A. Martin, and F. E. McDaniel, “Magnetic-Field Trimming Studies for a Separated-Sector Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-16, pp. 201-204.
[n] L. K. Mestha and K. S. Yeung, “Sychronization of a Variable Frequency Source with a Fixed Frequency Source Using a Sliding-Mode Controller”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1332-1335.
[n] M. Leporis, “DESIGN AND CONSTRUCTION OF THE NEW ION SOURCE DECRISÔÇô4”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P19, pp. XX-XX.
[n] K. Reiniger, “The Generation of a Reference Designn for TRIUMF KAON Factory Booster Magnet Excitation”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1908-1910.
[n] M. L. Friend et al., “First Beam Profile Measurements by Beam Induced Fluorescence at the J-PARC Neutrino Extraction Beamline”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 184-187. doi:10.18429/JACoW-IBIC2020-WEPP34
[n] D.-J. Wang, J.-R. Chen, and C. K. Kuan, “Mechanical Induced Beam Motion in SRRC Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH118, pp. 1485-1487.
[n] M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
[n] Y. U. Jeong, H. J. Cha, G. M. Kazakevich, B. C. Lee, and S.-H. Park, “Present Status and Results from the KAERI Compact THz FEL Facility”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUOA005, pp. XX-XX.
[n] H. Sinn et al., “Design of Photon Beamlines at the European XFEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THOCI1, pp. 683-689.
[n] C. Jamet et al., “Injector Diagnostics Overview of SPIRAL2 Accelerator”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB31, pp. 304-306.
[n] A. Taylor, “Performance of ANL 4-MV Dynamitron with Heavy-Ion Source”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 79-82.
[n] H. F. Weehuizen et al., “The New Distributed Control System of the NAC”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-06, pp. 656-659.
[n] R. Tanner, S. Hu, G. Wright, and E. D. Matias, “Integrating Siemens PLCs and EPICS over Ethernet at the Canadian Light Source”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO001, pp. 31-33.
[n] E. Boggasch et al., “Plasma Lenses for Heavy Ion Beam Focusing”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 596-599.
[n] K. Nakayoshi, Y. Fujii, and K. Sakashita, “Improvements in the T2K Primary Beamline Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA10, pp. 940-943.
[n] L. L. Reginato and B. H. Smith, “A 600 - kV, 10-m A DC Cockcroft-Walton Rectifier Using Silicon Diodes at 100 kc”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 274-279.
[n] S. Banna et al., “Scaling Laws of a Dielectric Optical Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB006, pp. 722-724.
[n] M. Luong, H. Safa, B. Bonin, T. Junquera, A. Le Goff, and S. Ma?»ssa, “Understanding and Processing of the Filed Emission Enhanced by Conducting Protrusions”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D21, pp. 981-993.
[n] N. Yu. Kazarinov et al., “Beam Lines for Gas Filled Separator Experiments at DC280 Cyclotron”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 272-275. doi:10.18429/JACoW-RUPAC2018-TUPSA60
[n] S. Kawata, A. Manabe, and H. Watanabe, “Cross-Field Acceleration by Electromagnetic Wave”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 703-706.
[n] D. Moffat et al., “Superconducting Niobium RF Cavities Designed to Attain High Surface Electric Fields”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G03, pp. XX-XX.
[n] J. Ferm?®, G. Gendreau, and P. Yvon, “Injection and Ejection Systems for the GANIL SSC”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-10, pp. 260-263.
[n] Y. K. Lin et al., “Statistical Analysis Package for the Opearion Monitoring at the TLS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4019-4021. doi:10.18429/JACoW-IPAC2016-THPOW035
[n] R. Fielder, A. Hinton, A. Bainbridge, B. Shepherd, I. Martin, and N. Krumpa, “Testing of a ZEPTO tuneable permanent magnet quadrupole at Diamond Light Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3874-3877. doi:10.18429/JACoW-IPAC2023-WEPM129
[n] B. Bogdanovitch and V. Kaminsky, “Research of the Accelerator RF System with Biperiodic Accelerating Structure”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP10A, pp. 1752-1754.
[n] N. Bultman, J. Billen, Z. Chen, M. Collier, D. Richards, and L. M. Young, “Fabrication and Tuning of the SNS CCL Hot Model”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB052, pp. 2844-2846.
[n] M. E. Castro Carballo, “Application of Single Crystal Diamonds (scCVD) as Beam Conditions Monitors at LHC”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA08, pp. 344-346.
[n] A. Stallwood, D. J. Butler, and G. M. A. Duller, “The Use of AM Technologies for HV and UHV Components and Vessels”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 114-117. doi:10.18429/JACoW-MEDSI2018-TUPH34
[n] M. K?Ârfer, W. G?Âttmann, J. Kuhnhenn, and F. Wulf, “Beam Loss Position Monitor Using Cerenkov Radiation in Optical Fibers”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW026, pp. 301-303.
[n] H. F. Weehuizen, R. K. Fisch, M. E. Hogan, I. H. Kohler, and P. J. Theron, “The Present Status of the NAC Control System”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-42, pp. 326-329.
[n] Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX.
[n] V. V. Kubarev, S. Bae, Ya. V. Getmanov, Y. U. Jeong, and O. A. Shevchenko, “Fine and Hyperfine Structure of FEL Emission Spectra”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 276-281. doi:10.18429/JACoW-FEL2019-TUD03
[n] C. Koschitzki et al., “Status of Chirped Pulse Laser Shaping for the PITZ Photoinjector”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 437-439. doi:10.18429/JACoW-FEL2019-WEP050
[n] X. W. Wang, X. L. Jiang, Y. Qiao, and Z. Xu, “The Superconducting Cyclotron RF System R&D”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 37-39. doi:10.18429/JACoW-HIAT2018-MOPB03
[n] J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 152-155. doi:10.18429/JACoW-MEDSI2016-TUPE01
[n] V. Balandin et al., “First Characterization of the Photon Beam at the European XFEL in July, 2017”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 180-183. doi:10.18429/JACoW-FEL2019-TUP058
[n] A. S. Chauchat, A. Binet, JP. Brasile, V. Le Flanchec, J-P. N?¿gre, and J.-M. Ortega, “Production and Characterisation of Inverse Compton Scattering X-rays with a 17 MeV Electron Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA001, pp. 61-63.
[n] R. L. Poirier and M. Zach, “TRIUMF RF System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1253-1257.
[n] J. J. Barnard et al., “Accelerator and Ion Beam Tradeoffs for Studies of Warm Dense Matter”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP039, pp. 2568-2570.
[n] M. H. Almalki, P. Forck, T. Sieber, and R. Singh, “Simulation of Bunch Length and Velocity Dependence of Button BPMs for Linacs Using CST Particle Studio?«”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 319-321. doi:10.18429/JACoW-IBIC2016-TUPG05
[n] A. Tauschwitz et al., “Beam Test of a Plasma Lens for Heavy Ion Beam Focusing”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 593-596.
[n] R. E. Meller and D. Hartill, “Pulsed NMR Magnetometers for CESR”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE008, pp. 2339-2341.
[n] D. K. Olsen et al., “Recent Developments at the Holifield Heavy Ion Research Facility”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 452-455.
[n] A. T. Drobot et al., “Numerical Simulation of High Power Microwave Sources”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2733-2738.
For LaTeX
Use Complete Form
For BibTeX
References
- R. W. Thomae, J. L. Conradie, D. T. Fourie, and D. Kuchler, “Beam Experiments with the Grenoble Test Electron Cyclotron Resonance Ion Source at iThemba LABS”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUPP14, pp. 68-70.
- J. P. Morgan, B. E. Drendel, and D. Vander Meulen, “Improvements to Antiproton Accumulator to Recycler Transfers at the Fermilab Tevatron Collider”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP032, pp. 1608-1610.
- S. Hillert et al., “The Beam Trajectory Monitor for the TTF-FEL at DESY”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B11, pp. 1803-1805.
- H. Zhang et al., “First measurement of the proton beam and lead ion beam in the LHC using beam gas curtain monitor”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THAD2, unpublished.
- E. Hemsing, A. Marinelli, and J. B. Rosenzweig, “Generation of Optical Orbital Angular Momentum in a Free-electron Laser”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE063, pp. 2278-2280.
- O. Piquet et al., “RF Conditionning of the Spiral 2 CW RFQ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4114-4117.
- S. Tariq, K. Ammigan, P. Hurh, P. Liu, R. Schultz, and J. Shang, “Li Material Testing- Fermilab Antiproton Source Lithium Collection Lens”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG013, pp. 1452-1454.
- H. Leboutet, J. Aucouturier, and J. C. Schnuriger, “I. Use of the Hodoscope to Measure the Axial Frequency of Betatron Oscillations; II. The Accelerating System of the Grenoble Isochronous Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63F04, pp. XX-XX.
- J. B. González Fernández, V. H. Haghighat, S. A. McDonald, K. Nygård, and L. K. Roslund, “ForMAX: A Beamline for Multi-Scale and Multi-Modal Structural Characterisation of Hierarchical Materials”, in Proc. MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper TUOBM01, pp. 15-18.
- M. Clausen, R. MacKenzie, R. Sass, H. Shoaee, K. Underwood, and G. White, “AIDA - Accelerator Integrated Data Access”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP011, pp. XX-XX.
- G. N. Minerbo, R. A. Jameson, and O. R. Sander, “Four-Dimensional Beam Tomography”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2231-2234.
- L. I. Donley, J. C. Dooling, and G. E. McMichael, “Using Ferrite as a Fast Switch for Improving Rise Time of IPNS Extraction Kicker”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE034, pp. 1159-1161.
- B. P. Wang et al., “Study of the Signal Processing System for a Cavity Beam Position MonitorS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR035, pp. 855-857.
- Y. K. Wu, S. Hartman, and S. F. Mikhailov, “A Physics Based Control System for the Duke Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB033, pp. 2482-2484.
- K. Takayama et al., “Induction Accelerating Devices for Induction Synchrotrons and the Superbunch VLHC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI075, pp. 1001-1003.
- R. W. Thomae et al., “The FOM-MEQALAC System: The RF Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0012, pp. 118-120.
- R. S. Lord et al., “Coupled Operation of the Oak Ridge Isochronous Cyclotron and the 25 MV Tandem”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2083-2086.
- S. Kumar and A. Mandal, “Start to End Simulation of High Current Injector using TRACEWIN Code”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 223-225.
- P. N. Prakash, K. K. Mistri, A. Roy, J. Sacharias, and S. S. Sonti, “Superconducting Low Beta Niobium Resonator for Heavy Ions”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB049, pp. 588-590.
- I. Y. Lee, J. A. Martin, J. B. McGrory, W. T. Milner, D. K. Olsen, and G. R. Young, “Lattice Design of HISTRAP: Heavy Ion Storage Ring for Atomic Physics”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 310-313.
- L. David, E. Lecorche, T. T. Luong, and M. Ulrich, “The GANIL Computer Control System Renewal”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 830-833.
- M. Hachmann and K. Floettmann, “Transverse Emittance Measurement at REGAE”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 837-840.
- W. Booth, E. B. Blanco Vinuela, B. Bradu, L. Gomez Palacin, M. Quilichini, and D. Willeman, “Re-Engineering Control Systems using Automatic Generation Tools and Process Simulation: the LHC Water Cooling Case”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC076, pp. 1242-1245.
- E. B. Akubakirov et al., “Generation and Acceleration of High-current Annular Electron Beam in Linear Induction Accelerator and Microwave Power from Cherenkov TWT”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 34-37.
- I. V. Kalagin, S. N. Dmitriev, B. Gikal, and G. Gulbekyan, “Status of the FLNR JINR Cyclotrons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP099, pp. 5011-5013.
- H. Zen et al., “Present Status of Mid-infrared Free Electron Laser Facility in Kyoto University”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA013, pp. 1190-1192.
- M. H. Burt et al., “An Improved Polarisation Analyser for the I16 Beamline at Diamond”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 346-348.
- H. Gundel, H. Henke, H. Heydari, K. Schmidt, and D. Suchland, “Profile Measurements on a Pulsed Ferroelectric Electron Beam”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1023-1026.
- M. Martinello et al., “Tailoring Surface Impurity Content to Maximize Q-factors of Superconducting Resonators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2258-2261.
- J. J. Petillo et al., “The MICHELLE Electron Gun and Collector Modeling Tool”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH090, pp. 3054-3056.
- U. Klein, M. Peiniger, and H. Vogel, “RF Superconductivity at Interatom”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G08, pp. XX-XX.
- E. Takada and T. Kondo, “Synchrotron Control System of HIMAC”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP014, pp. XX-XX.
- Z. Yin, Y. Wu, and J. F. Zhang, “Design and Experiment of the BEPCII IR Conventional Dual Aperture Quadrupole”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT002, unpublished.
- R. MacGill and R. Yourd, “Mechanical Design of a Heavy Ion RFQ”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3004-3007.
- C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
- J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 79-83.
- M. B. Shrader and D. H. Preist, “Compact High Efficiency, Lightweight 200-800 MHz High Power RF Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2751-2754.
- V. A. Andreev and G. Parisi, “Field Stabilization and End-Cell Tuning in a 4-vane RFQ”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1300-1303.
- B. Dwersteg, G. Kreps, and A. Matheisen, “Operating Experience with Superconducting Cavities in HERA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2039-2042.
- Q. S. Shu et al., “The Effects of Exposing Well Processed RF Surfaces of Superconducting Cavities to Various Media”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G10, pp. XX-XX.
- M. Peiniger, C. Piel, H. Vogel, and P. vom Stein, “A 100 MeV Injector Linac for the Swiss Light Source Supplied by Industry”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA56, pp. 3510-3512.
- R. E. Worsham, “Stability and Tolerance of the Separated Orbit Cyclotron”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 644-648.
- E. Karantzoulis and M. Plesko, “Macmon: A Monitoring Program for ELETTRA”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR12, pp. 2262-2264.
- E. Shaposhnikova, P. Baudrenghien, T. Bohl, T. Linnecar, and J. Tuckmantel, “Nominal Longitudinal Parameters for the LHC Beam in the CERN SPS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB015, pp. 3050-3052.
- R. J. Pasquinelli et al., “A 1.7 GHz Waveguide Schottky Detector System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB023, pp. 3068-3070.
- E. D. Hudson, F. Irwin, M. L. Mallory, J. A. Martin, and F. E. McDaniel, “Magnetic-Field Trimming Studies for a Separated-Sector Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-16, pp. 201-204.
- L. K. Mestha and K. S. Yeung, “Sychronization of a Variable Frequency Source with a Fixed Frequency Source Using a Sliding-Mode Controller”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1332-1335.
- M. Leporis, “DESIGN AND CONSTRUCTION OF THE NEW ION SOURCE DECRISÔÇô4”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P19, pp. XX-XX.
- K. Reiniger, “The Generation of a Reference Designn for TRIUMF KAON Factory Booster Magnet Excitation”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1908-1910.
- M. L. Friend et al., “First Beam Profile Measurements by Beam Induced Fluorescence at the J-PARC Neutrino Extraction Beamline”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 184-187.
- D.-J. Wang, J.-R. Chen, and C. K. Kuan, “Mechanical Induced Beam Motion in SRRC Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH118, pp. 1485-1487.
- M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
- Y. U. Jeong, H. J. Cha, G. M. Kazakevich, B. C. Lee, and S.-H. Park, “Present Status and Results from the KAERI Compact THz FEL Facility”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUOA005, pp. XX-XX.
- H. Sinn et al., “Design of Photon Beamlines at the European XFEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THOCI1, pp. 683-689.
- C. Jamet et al., “Injector Diagnostics Overview of SPIRAL2 Accelerator”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB31, pp. 304-306.
- A. Taylor, “Performance of ANL 4-MV Dynamitron with Heavy-Ion Source”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 79-82.
- H. F. Weehuizen et al., “The New Distributed Control System of the NAC”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XI-06, pp. 656-659.
- R. Tanner, S. Hu, G. Wright, and E. D. Matias, “Integrating Siemens PLCs and EPICS over Ethernet at the Canadian Light Source”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO001, pp. 31-33.
- E. Boggasch et al., “Plasma Lenses for Heavy Ion Beam Focusing”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 596-599.
- K. Nakayoshi, Y. Fujii, and K. Sakashita, “Improvements in the T2K Primary Beamline Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA10, pp. 940-943.
- L. L. Reginato and B. H. Smith, “A 600 - kV, 10-m A DC Cockcroft-Walton Rectifier Using Silicon Diodes at 100 kc”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 274-279.
- S. Banna et al., “Scaling Laws of a Dielectric Optical Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAB006, pp. 722-724.
- M. Luong, H. Safa, B. Bonin, T. Junquera, A. Le Goff, and S. Ma?»ssa, “Understanding and Processing of the Filed Emission Enhanced by Conducting Protrusions”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D21, pp. 981-993.
- N. Yu. Kazarinov et al., “Beam Lines for Gas Filled Separator Experiments at DC280 Cyclotron”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 272-275.
- S. Kawata, A. Manabe, and H. Watanabe, “Cross-Field Acceleration by Electromagnetic Wave”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 703-706.
- D. Moffat et al., “Superconducting Niobium RF Cavities Designed to Attain High Surface Electric Fields”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G03, pp. XX-XX.
- J. Ferm?®, G. Gendreau, and P. Yvon, “Injection and Ejection Systems for the GANIL SSC”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-10, pp. 260-263.
- Y. K. Lin et al., “Statistical Analysis Package for the Opearion Monitoring at the TLS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4019-4021.
- R. Fielder, A. Hinton, A. Bainbridge, B. Shepherd, I. Martin, and N. Krumpa, “Testing of a ZEPTO tuneable permanent magnet quadrupole at Diamond Light Source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM129, pp. 3874-3877.
- B. Bogdanovitch and V. Kaminsky, “Research of the Accelerator RF System with Biperiodic Accelerating Structure”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP10A, pp. 1752-1754.
- N. Bultman, J. Billen, Z. Chen, M. Collier, D. Richards, and L. M. Young, “Fabrication and Tuning of the SNS CCL Hot Model”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB052, pp. 2844-2846.
- M. E. Castro Carballo, “Application of Single Crystal Diamonds (scCVD) as Beam Conditions Monitors at LHC”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA08, pp. 344-346.
- A. Stallwood, D. J. Butler, and G. M. A. Duller, “The Use of AM Technologies for HV and UHV Components and Vessels”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 114-117.
- M. K?Ârfer, W. G?Âttmann, J. Kuhnhenn, and F. Wulf, “Beam Loss Position Monitor Using Cerenkov Radiation in Optical Fibers”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW026, pp. 301-303.
- H. F. Weehuizen, R. K. Fisch, M. E. Hogan, I. H. Kohler, and P. J. Theron, “The Present Status of the NAC Control System”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-42, pp. 326-329.
- Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX.
- V. V. Kubarev, S. Bae, Ya. V. Getmanov, Y. U. Jeong, and O. A. Shevchenko, “Fine and Hyperfine Structure of FEL Emission Spectra”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 276-281.
- C. Koschitzki et al., “Status of Chirped Pulse Laser Shaping for the PITZ Photoinjector”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 437-439.
- X. W. Wang, X. L. Jiang, Y. Qiao, and Z. Xu, “The Superconducting Cyclotron RF System R&D”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 37-39.
- J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 152-155.
- V. Balandin et al., “First Characterization of the Photon Beam at the European XFEL in July, 2017”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 180-183.
- A. S. Chauchat, A. Binet, JP. Brasile, V. Le Flanchec, J-P. N?¿gre, and J.-M. Ortega, “Production and Characterisation of Inverse Compton Scattering X-rays with a 17 MeV Electron Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA001, pp. 61-63.
- R. L. Poirier and M. Zach, “TRIUMF RF System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1253-1257.
- J. J. Barnard et al., “Accelerator and Ion Beam Tradeoffs for Studies of Warm Dense Matter”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP039, pp. 2568-2570.
- M. H. Almalki, P. Forck, T. Sieber, and R. Singh, “Simulation of Bunch Length and Velocity Dependence of Button BPMs for Linacs Using CST Particle Studio?«”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 319-321.
- A. Tauschwitz et al., “Beam Test of a Plasma Lens for Heavy Ion Beam Focusing”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 593-596.
- R. E. Meller and D. Hartill, “Pulsed NMR Magnetometers for CESR”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE008, pp. 2339-2341.
- D. K. Olsen et al., “Recent Developments at the Holifield Heavy Ion Research Facility”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 452-455.
- A. T. Drobot et al., “Numerical Simulation of High Power Microwave Sources”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2733-2738.
Back to search