Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Mori et al., “Developments of Long-pulse Klystron Modulator for KEK Super-conducting RF Test Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIBKI04, pp. 2691-2692.
[n] B. Buonomo et al., “The Frascati DAFNE LINAC low level radio frequency status”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4209-4211. doi:10.18429/JACoW-IPAC2023-THPA105
[n] M. Mayer, G. Howard, H. Kuhn, G. H. Schroeder, and G. Wilkinson, “Metallized Ceramic Vacuum Chambers for the LEP Injection Kicker Magnets”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1378-1381.
[n] Y. Lee et al., “Study of the ramping process for Korea-4GSR”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1128-1130. doi:10.18429/JACoW-IPAC2023-MOPM060
[n] T. Higo, “Performance of Normal Conducting Structures for Linear Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAE02, pp. 1474-1477.
[n] A. P. Soumbaev et al., “LUE200 Linac. Full-Scale Testing of Accelerating Sections”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU405, pp. 311-313.
[n] L. Schachter, J. A. Nation, and T. J. Davis, “TM-FEL with a Longitudinal Wiggler and and Annular Beam”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2653-2656.
[n] M. C. Lin and D. N. Smithe, “Study on Low-Frequency Oscillations in a Gyrotron Using a 3D CFDTD PIC Method”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP123, pp. 1713-1715.
[n] D. A. Shkitov, A. Potylitsyn, A. S. Aryshev, and J. Urakawa, “Double Diffraction Radiation Target Interferometry for Micro-train Beam Diagnostics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3635-3637. doi:10.18429/JACoW-IPAC2014-THPME159
[n] Yu. M. Ado, “The 70-GeV Proton Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 5-12.
[n] S. Sabounchi, H. Afarideh, R. Solhju, M. R. Asadi, J.-S. Chai, and M. Ghergherehchi, “Stress and Strain Analysis of the 10 MeV Cyclotron Magnet”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 71-73. doi:10.18429/JACoW-ICAP2015-WEP03
[n] G. Jang, J. Kim, and J. Lee, “Current status of the storage ring design of Korea-4GSR”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL059, unpublished.
[n] G. V. Trubnikov and V. A. Shvets, “THE ELECTRON GUN FOR LUE-200 (PROJECT IREN)”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP10, pp. XX-XX.
[n] A. Bungau, C. Bungau, and R. Cywinski, “Target Optimisation Studies for the European Spallation Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA078, pp. 256-258.
[n] S. De Santis, M. G. Billing, B. T. Carlson, M. A. Palmer, and J. P. Sikora, “TE Wave Measurements of the Electron Cloud in the Cesr-TA Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE088, pp. 1188-1190.
[n] G. Marcus et al., “Advanced Longitudinal Diagnostic for Single-Spike Operation at the SPARC FEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP049, pp. 4063-4065.
[n] M. P. Stockli et al., “Operating the SNS RF H? Ion Source with a 10% Duty Factor”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1951-1953. doi:10.18429/JACoW-IPAC2019-TUPTS009
[n] A. S. Plastun, P. N. Ostroumov, A. C. C. Villari, and Q. Zhao, “Longitudinal Beam Dynamics in FRIB and ReA Linacs”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 330-334. doi:10.18429/JACoW-ICAP2018-WEPAF04
[n] A. R. Mahlou, H. Afarideh, B. Fateh, and S. M. Hadji-Saeid, “Design and Construction of Control System for Radioisotope Production Through Gas Target”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper H-02, pp. 555-559.
[n] S. Sabounchi, H. Afarideh, R. Solhju, F. Zakerhosseini, and M. Ghergherehchi, “Heat Transfer Studies of the IRANCYC-10 Magnet and its Effects on the Isochronous Magnetic Field”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 380-382. doi:10.18429/JACoW-Cyclotrons2016-THD02
[n] C. L. Hodgkinson, A. Daly, D. M. Dykes, and P. A. McIntosh, “A Preliminary Mechanical Design of a 500MHz Accelerating Cavity with Damped High Order Modes”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH041, pp. 858-860.
[n] F. Willeke, “HERA Status and Upgrade Plans”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B002, pp. 51-55.
[n] R. J. Burton, L. W. Funk, and M. S. de Jong, “Vacuum and Mulipactor Performance of the HERA 52 MHz Cavities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1017-1020.
[n] H. Eschelbacher and H. Schopper, “An Investigation of the Slotted Iris Structure with Drift Tubes”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper X-05, pp. 502-507.
[n] U. H. Lacroix, E. R. Arab, D. M. Fong, G. Travish, N. Vartanian, and R. B. Yoder, “Initial Results on Electron Beam Generation using Pyroelectric Crystals”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD046, pp. 4384-4386.
[n] J. Bosser, P. Bramham, C. Metzger, and C. Taylor, “Design and Perforance of the AAC Stack Core Cooling System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1421-1424.
[n] B. E. Carlsten, M. V. Fazio, W. Brian Haynes, L. M. May, and J. M. Potter, “Phase-Stable, Microwave FEL Amplifier”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAE06, pp. 1494-1496.
[n] A. G. Ruggiero, “Review of Heavy Ion Collider Proposals”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1596-1601.
[n] M. Mirzaei, H. Afarideh, K. Ardaneh, and S. M. Hadji-Saeid, “Production of 111In by Irradiation of Natural Cadmium with Deuterons and Protons in NRCAM Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-13, pp. 65-67.
[n] D. N. Smithe, D. Karipides, P. Stoltz, G. Cheng, and H. Wang, “Integrated EM & Thermal Simulations with Upgraded VORPAL Software”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOCS4, pp. 1463-1465.
[n] M. Hoffmann Wallner et al., “Efficient RF components of solid-state amplifiers for Sirius storage ring's RF plant”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3586-3589. doi:10.18429/JACoW-IPAC2023-WEPM008
[n] G. Dugan, “Tevatron I: Energy Saver and pbar Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1582-1587.
[n] G. Cheng, H. Wang, and D. N. Smithe, “RF-thermal Combined Simulations of a Superconducting HOM Coaxial Coupler”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP107, pp. 1041-1043.
[n] D. A. Dimitrov et al., “Modeling Electron Emission and Surface Effects from Diamond Cathodes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 620-622. doi:10.18429/JACoW-IPAC2015-MOPMA033
[n] P. J. M. van der Slot, K.-J. Boller, and A. Strooisma, “A Mirror-Less, Multi-Beam Photonic Free-Electron Laser Oscillator Pumped Far Beyond Threshold”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 334-337. doi:10.18429/JACoW-FEL2015-TUP005
[n] D. Moll, F. Boattini, L. Bottura, M. Breschi, L. D'Angelo, and H. De Gersem, “Transient finite-element simulations of fast-ramping normal-conducting magnets for a 10 TeV muon collider”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB029, unpublished.
[n] E. Laface, Y. I. Levinsen, I. List, and T. A. Pelaia II, “Comparing RF-Cavity Phase-Scan Simulations in the ESS Linac Simulator with Measurements Taken in the Spallation Neutron Source Coupled-Cavity Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3317-3319. doi:10.18429/JACoW-IPAC2016-THPMB038
[n] A. P. Soumbaev, A. S. Kayukov, V. A. Shvets, O. V. Strekalovsky, and M. M. Korjovkina, “Plans for A Control System for The LUE200 Linac in JINR”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH440, pp. 689-691.
[n] R. Corsini, F. Tecker, P. Urschütz, H.-H. Braun, S. Doebert, and E. Jensen, “Efficient Long-Pulse, Fully Loaded CTF3 Linac Operation”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP002, pp. 31-33.
[n] H. Schopper, “Status of LEP and its Experimental Programme”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1561-1565.
[n] K. Turaj et al., “Degradation and Recovery of the LHC RF Cryomodule Performance Using the Helium Processing Technique”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 746. doi:10.18429/JACoW-SRF2021-THPFAV006
[n] A. P. Potylitsyn, Yu. A. Popov, A. V. Vukolov, I. V. Zaitsev, A. R. Wagner, and V. N. Zabaev, “THE COMPARISON OF MONOCHROMATIC X-RAY SOURCES BASED ON X-RAY TUBE AND 5 MEV MICROTRON FOR POSSIBLE APPLICATION IN MEDICINE”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEAAU03, pp. XX-XX.
[n] I. de la Fuente, K.-J. Boller, and P. J. M. van der Slot, “Influence of Linear Fluctuations on Low- and High-Gain Cherenkov FELs”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH036, pp. 118-121.
[n] O. Karamyshev et al., “Computer Modelling of the SC202 Superconducting Cyclotron for Hadron Therapy”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 742-744. doi:10.18429/JACoW-IPAC2017-MOPIK092
[n] A. K. Mitra, R. L. Poirier, and E. Jensen, “Coarse and Fine Tuners for the CERN PS 40 MHz Bunching Cavity”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P037, pp. 3060-3062.
[n] J. H. Dieperink, J.-L. Bretin, E. Carlier, L. Ducimeti, G. H. Schr, and E. Vossenberg, “Design Aspects Related to the Reliability of the LHC Beam Dump Kicker Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P007, pp. 225-227.
[n] R. W. Connatser, “Introduction to Neutron Scattering Instruments - How are they Different?”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 360-362. doi:10.18429/JACoW-MEDSI2016-WEPE30
[n] S. Usherovich et al., “A novel fiber-optic beam monitor”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3890-3892. doi:10.18429/JACoW-IPAC2023-WEPM134
[n] D. Moll et al., “Transient finite-element simulations of fast-ramping muon-collider magnets”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1548-1551. doi:10.18429/JACoW-IPAC2024-TUPR54
[n] W. Decking, O. Kaul, H. Nesemann, and J. Roßbach, “Treatment of Wiggler and Undulator Field Errors in Tracking Codes”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAC19, pp. 2874-2876.
[n] P. L. Colestock and L. Klamp, “A Generalized Model for Parametric Coupling of Longitudinal Modes in Synchrotrons”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3384-3387.
[n] T. A. Pelaia II, “Open XAL Build System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1265-1266. doi:10.18429/JACoW-IPAC2015-MOPWI048
[n] S. Magyary et al., “Advanced Light Source Control System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 74-79.
[n] D. A. Dimitrov et al., “Simulations of Surface Effects and Electron Emission from Diamond-Amplifier Cathodes”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC132, pp. 2307-2309.
[n] T. A. Pelaia II, “Open XAL Services Architecture”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1267-1269. doi:10.18429/JACoW-IPAC2015-MOPWI049
[n] D. Raparia, C. R. Chang, L. W. Funk, D. A. Swenson, B. Turner, and C. G. Yao, “Design Improvements for the SSC CCL”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-56, pp. 202-204.
[n] N. Juntong et al., “100 keV Electron Source Design for the New 3 GeV Synchrotron Facility in Thailand”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2800-2802. doi:10.18429/JACoW-IPAC2022-THPOTK014
[n] S. Humphries, “Charged Particle Accelerators for Inertial Fusion Energy”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 6-11.
[n] J. A. Diaz Cruz, S. Biedron, M. Mart?¡nez-Ram??n, R. Pirayesh, and S. I. Sosa Guitron, “Studies in Applying Machine Learning to Resonance Control in Superconducting RF Cavities”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 659-662. doi:10.18429/JACoW-NAPAC2019-WEPLM01
[n] L. R. Evans, “LHC Status and Plans”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B004, pp. 61-65.
[n] A. Sato and S. Ishimoto, “Muon Cooling in a Racetrack FFAG using Superfluid Helium Wedge Absorbers”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper THPMCP008, pp. 150-153.
[n] H.-C. Hseuh et al., “Status of NSLS-II Storage Ring Vacuum Systems”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP227, pp. 1244-1246.
[n] S. Peggs, “RHIC Status”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B003, pp. 56-60.
[n] C. L. Hodgkinson, D. M. Dykes, V. Duerr, F. Marhauser, and E. Weihreter, “Mechanical and Thermal Layout of a 500 MHz HOM-Damped Cavity”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE116, pp. 2151-2153.
[n] L. Schachter and J. A. Nation, “Beam-Wave Interaction in a Quasi-Periodic Structure”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2684-2687.
[n] J. Qiang, “Envelope Instabilities and Their Mitigation in High Intensity Hadron Beams”, presented at the HB'21, Batavia, IL, USA, Oct. 2021, paper WEBC1, unpublished.
[n] R. Cee, W. Mittig, and A. C. C. Villari, “Beam Optical Design of a Multi Charge Ion Recirculator for Charge Breeders”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT051, pp. 1267-1269.
[n] B. A. Frolov, “CALCULATION OF EXTRACTION OPTICS FOR ION SYSTEM WITH PLAZMA EMITTER”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP03, pp. XX-XX.
[n] N. Rahimpour Kalkhoran, H. Afarideh, R. Solhju, J.-S. Chai, and M. Ghergherehchi, “Improvement of 18 MeV Cyclotron Magnet Design by TOSCA Code”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1397-1399. doi:10.18429/JACoW-IPAC2016-TUPMR060
[n] H. Schopper, “Progress Report on the Investigations of Superconducting Structures at Karlsruhe”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper H-5, pp. 755-764.
[n] L. Yang, J. Choi, Y. Hidaka, Y. Li, G. Shen, and G. M. Wang, “The Design of NSLS-II High Level Physics Applications”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC130, pp. 890-892.
[n] A. P. Blondel and P. Drumm, “Progress and Status of the MICE Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH164, pp. 3176-3178.
[n] R. Hettrich et al., “Latest News from Stochastic Cooling Developments for the Collector Ring at FAIR”, in Proc. COOL'17, Bonn, Germany, Sep. 2017, pp. 64-67. doi:10.18429/JACoW-COOL2017-TUP16
For LaTeX
Use Complete Form
For BibTeX
References
- H. Mori et al., “Developments of Long-pulse Klystron Modulator for KEK Super-conducting RF Test Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THIBKI04, pp. 2691-2692.
- B. Buonomo et al., “The Frascati DAFNE LINAC low level radio frequency status”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA105, pp. 4209-4211.
- M. Mayer, G. Howard, H. Kuhn, G. H. Schroeder, and G. Wilkinson, “Metallized Ceramic Vacuum Chambers for the LEP Injection Kicker Magnets”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1378-1381.
- Y. Lee et al., “Study of the ramping process for Korea-4GSR”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM060, pp. 1128-1130.
- T. Higo, “Performance of Normal Conducting Structures for Linear Colliders”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAE02, pp. 1474-1477.
- A. P. Soumbaev et al., “LUE200 Linac. Full-Scale Testing of Accelerating Sections”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU405, pp. 311-313.
- L. Schachter, J. A. Nation, and T. J. Davis, “TM-FEL with a Longitudinal Wiggler and and Annular Beam”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2653-2656.
- M. C. Lin and D. N. Smithe, “Study on Low-Frequency Oscillations in a Gyrotron Using a 3D CFDTD PIC Method”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP123, pp. 1713-1715.
- D. A. Shkitov, A. Potylitsyn, A. S. Aryshev, and J. Urakawa, “Double Diffraction Radiation Target Interferometry for Micro-train Beam Diagnostics”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3635-3637.
- Yu. M. Ado, “The 70-GeV Proton Synchrotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 5-12.
- S. Sabounchi, H. Afarideh, R. Solhju, M. R. Asadi, J.-S. Chai, and M. Ghergherehchi, “Stress and Strain Analysis of the 10 MeV Cyclotron Magnet”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 71-73.
- G. Jang, J. Kim, and J. Lee, “Current status of the storage ring design of Korea-4GSR”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL059, unpublished.
- G. V. Trubnikov and V. A. Shvets, “THE ELECTRON GUN FOR LUE-200 (PROJECT IREN)”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUIP10, pp. XX-XX.
- A. Bungau, C. Bungau, and R. Cywinski, “Target Optimisation Studies for the European Spallation Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA078, pp. 256-258.
- S. De Santis, M. G. Billing, B. T. Carlson, M. A. Palmer, and J. P. Sikora, “TE Wave Measurements of the Electron Cloud in the Cesr-TA Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE088, pp. 1188-1190.
- G. Marcus et al., “Advanced Longitudinal Diagnostic for Single-Spike Operation at the SPARC FEL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP049, pp. 4063-4065.
- M. P. Stockli et al., “Operating the SNS RF H? Ion Source with a 10% Duty Factor”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1951-1953.
- A. S. Plastun, P. N. Ostroumov, A. C. C. Villari, and Q. Zhao, “Longitudinal Beam Dynamics in FRIB and ReA Linacs”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 330-334.
- A. R. Mahlou, H. Afarideh, B. Fateh, and S. M. Hadji-Saeid, “Design and Construction of Control System for Radioisotope Production Through Gas Target”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper H-02, pp. 555-559.
- S. Sabounchi, H. Afarideh, R. Solhju, F. Zakerhosseini, and M. Ghergherehchi, “Heat Transfer Studies of the IRANCYC-10 Magnet and its Effects on the Isochronous Magnetic Field”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 380-382.
- C. L. Hodgkinson, A. Daly, D. M. Dykes, and P. A. McIntosh, “A Preliminary Mechanical Design of a 500MHz Accelerating Cavity with Damped High Order Modes”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH041, pp. 858-860.
- F. Willeke, “HERA Status and Upgrade Plans”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2B002, pp. 51-55.
- R. J. Burton, L. W. Funk, and M. S. de Jong, “Vacuum and Mulipactor Performance of the HERA 52 MHz Cavities”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1017-1020.
- H. Eschelbacher and H. Schopper, “An Investigation of the Slotted Iris Structure with Drift Tubes”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper X-05, pp. 502-507.
- U. H. Lacroix, E. R. Arab, D. M. Fong, G. Travish, N. Vartanian, and R. B. Yoder, “Initial Results on Electron Beam Generation using Pyroelectric Crystals”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD046, pp. 4384-4386.
- J. Bosser, P. Bramham, C. Metzger, and C. Taylor, “Design and Perforance of the AAC Stack Core Cooling System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1421-1424.
- B. E. Carlsten, M. V. Fazio, W. Brian Haynes, L. M. May, and J. M. Potter, “Phase-Stable, Microwave FEL Amplifier”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAE06, pp. 1494-1496.
- A. G. Ruggiero, “Review of Heavy Ion Collider Proposals”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1596-1601.
- M. Mirzaei, H. Afarideh, K. Ardaneh, and S. M. Hadji-Saeid, “Production of 111In by Irradiation of Natural Cadmium with Deuterons and Protons in NRCAM Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-13, pp. 65-67.
- D. N. Smithe, D. Karipides, P. Stoltz, G. Cheng, and H. Wang, “Integrated EM & Thermal Simulations with Upgraded VORPAL Software”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOCS4, pp. 1463-1465.
- M. Hoffmann Wallner et al., “Efficient RF components of solid-state amplifiers for Sirius storage ring's RF plant”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM008, pp. 3586-3589.
- G. Dugan, “Tevatron I: Energy Saver and pbar Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1582-1587.
- G. Cheng, H. Wang, and D. N. Smithe, “RF-thermal Combined Simulations of a Superconducting HOM Coaxial Coupler”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP107, pp. 1041-1043.
- D. A. Dimitrov et al., “Modeling Electron Emission and Surface Effects from Diamond Cathodes”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 620-622.
- P. J. M. van der Slot, K.-J. Boller, and A. Strooisma, “A Mirror-Less, Multi-Beam Photonic Free-Electron Laser Oscillator Pumped Far Beyond Threshold”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 334-337.
- D. Moll, F. Boattini, L. Bottura, M. Breschi, L. D'Angelo, and H. De Gersem, “Transient finite-element simulations of fast-ramping normal-conducting magnets for a 10 TeV muon collider”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB029, this conference.
- E. Laface, Y. I. Levinsen, I. List, and T. A. Pelaia II, “Comparing RF-Cavity Phase-Scan Simulations in the ESS Linac Simulator with Measurements Taken in the Spallation Neutron Source Coupled-Cavity Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3317-3319.
- A. P. Soumbaev, A. S. Kayukov, V. A. Shvets, O. V. Strekalovsky, and M. M. Korjovkina, “Plans for A Control System for The LUE200 Linac in JINR”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH440, pp. 689-691.
- R. Corsini, F. Tecker, P. Urschütz, H.-H. Braun, S. Doebert, and E. Jensen, “Efficient Long-Pulse, Fully Loaded CTF3 Linac Operation”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP002, pp. 31-33.
- H. Schopper, “Status of LEP and its Experimental Programme”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1561-1565.
- K. Turaj et al., “Degradation and Recovery of the LHC RF Cryomodule Performance Using the Helium Processing Technique”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 746.
- A. P. Potylitsyn, Yu. A. Popov, A. V. Vukolov, I. V. Zaitsev, A. R. Wagner, and V. N. Zabaev, “THE COMPARISON OF MONOCHROMATIC X-RAY SOURCES BASED ON X-RAY TUBE AND 5 MEV MICROTRON FOR POSSIBLE APPLICATION IN MEDICINE”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEAAU03, pp. XX-XX.
- I. de la Fuente, K.-J. Boller, and P. J. M. van der Slot, “Influence of Linear Fluctuations on Low- and High-Gain Cherenkov FELs”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH036, pp. 118-121.
- O. Karamyshev et al., “Computer Modelling of the SC202 Superconducting Cyclotron for Hadron Therapy”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 742-744.
- A. K. Mitra, R. L. Poirier, and E. Jensen, “Coarse and Fine Tuners for the CERN PS 40 MHz Bunching Cavity”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P037, pp. 3060-3062.
- J. H. Dieperink, J.-L. Bretin, E. Carlier, L. Ducimeti, G. H. Schr, and E. Vossenberg, “Design Aspects Related to the Reliability of the LHC Beam Dump Kicker Systems”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P007, pp. 225-227.
- R. W. Connatser, “Introduction to Neutron Scattering Instruments - How are they Different?”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 360-362.
- S. Usherovich et al., “A novel fiber-optic beam monitor”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM134, pp. 3890-3892.
- D. Moll et al., “Transient finite-element simulations of fast-ramping muon-collider magnets”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR54, pp. 1548-1551.
- W. Decking, O. Kaul, H. Nesemann, and J. Roßbach, “Treatment of Wiggler and Undulator Field Errors in Tracking Codes”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAC19, pp. 2874-2876.
- P. L. Colestock and L. Klamp, “A Generalized Model for Parametric Coupling of Longitudinal Modes in Synchrotrons”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3384-3387.
- T. A. Pelaia II, “Open XAL Build System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1265-1266.
- S. Magyary et al., “Advanced Light Source Control System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 74-79.
- D. A. Dimitrov et al., “Simulations of Surface Effects and Electron Emission from Diamond-Amplifier Cathodes”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC132, pp. 2307-2309.
- T. A. Pelaia II, “Open XAL Services Architecture”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1267-1269.
- D. Raparia, C. R. Chang, L. W. Funk, D. A. Swenson, B. Turner, and C. G. Yao, “Design Improvements for the SSC CCL”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-56, pp. 202-204.
- N. Juntong et al., “100 keV Electron Source Design for the New 3 GeV Synchrotron Facility in Thailand”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2800-2802.
- S. Humphries, “Charged Particle Accelerators for Inertial Fusion Energy”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 6-11.
- J. A. Diaz Cruz, S. Biedron, M. Mart?¡nez-Ram??n, R. Pirayesh, and S. I. Sosa Guitron, “Studies in Applying Machine Learning to Resonance Control in Superconducting RF Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 659-662.
- L. R. Evans, “LHC Status and Plans”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2B004, pp. 61-65.
- A. Sato and S. Ishimoto, “Muon Cooling in a Racetrack FFAG using Superfluid Helium Wedge Absorbers”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper THPMCP008, pp. 150-153.
- H.-C. Hseuh et al., “Status of NSLS-II Storage Ring Vacuum Systems”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP227, pp. 1244-1246.
- S. Peggs, “RHIC Status”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2B003, pp. 56-60.
- C. L. Hodgkinson, D. M. Dykes, V. Duerr, F. Marhauser, and E. Weihreter, “Mechanical and Thermal Layout of a 500 MHz HOM-Damped Cavity”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE116, pp. 2151-2153.
- L. Schachter and J. A. Nation, “Beam-Wave Interaction in a Quasi-Periodic Structure”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2684-2687.
- J. Qiang, “Envelope Instabilities and Their Mitigation in High Intensity Hadron Beams”, presented at the 64th Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'21), Batavia, IL, USA, Oct. 2021, paper WEBC1, unpublished.
- R. Cee, W. Mittig, and A. C. C. Villari, “Beam Optical Design of a Multi Charge Ion Recirculator for Charge Breeders”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT051, pp. 1267-1269.
- B. A. Frolov, “CALCULATION OF EXTRACTION OPTICS FOR ION SYSTEM WITH PLAZMA EMITTER”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUIP03, pp. XX-XX.
- N. Rahimpour Kalkhoran, H. Afarideh, R. Solhju, J.-S. Chai, and M. Ghergherehchi, “Improvement of 18 MeV Cyclotron Magnet Design by TOSCA Code”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1397-1399.
- H. Schopper, “Progress Report on the Investigations of Superconducting Structures at Karlsruhe”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper H-5, pp. 755-764.
- L. Yang, J. Choi, Y. Hidaka, Y. Li, G. Shen, and G. M. Wang, “The Design of NSLS-II High Level Physics Applications”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC130, pp. 890-892.
- A. P. Blondel and P. Drumm, “Progress and Status of the MICE Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH164, pp. 3176-3178.
- R. Hettrich et al., “Latest News from Stochastic Cooling Developments for the Collector Ring at FAIR”, in Proc. 11th Workshop on Beam Cooling and Related Topics (COOL'17), Bonn, Germany, Sep. 2017, pp. 64-67.
Back to search