Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. D. Fartoukh, “Low-Beta Insertions Inducing Chromatic Aberrations in Storage Rings and their Local and Global Correction”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP037, pp. 3784-3786.
[n] D. J. Gibson et al., “Optimal Design of a Tunable Thomson-Scattering Based Gamma-Ray Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS030, pp. 1248-1250.
[n] G. Bisoffi et al., “Prototype of a Superconducting RFQ for a Heavy Ion Injector Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W023, pp. 1087-1089.
[n] K. Ammigan et al., “Experimental Results of Beryllium Exposed to Intense High Energy Proton Beam Pulses”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 102-105. doi:10.18429/JACoW-NAPAC2016-MOPOB14
[n] V. Forte et al., “The PSB Operational Scenario with Longitudinal Painting Injection in the Post-LIU Era”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3331-3334. doi:10.18429/JACoW-IPAC2017-WEPVA035
[n] A. M. Lombardi, O. S. Br??ning, S. D. Fartoukh, T. Risselada, F. Schmidt, and A. Verdier, “Dynamic Aperture Reduction from the Dodecapole Component in the LHC Main Quadrupoles and its Mechanism.”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT026, pp. 1885-1887.
[n] S. M. White, H. Burkhardt, S. D. Fartoukh, and T. Pieloni, “Optimization of the LHC Separation Bumps Including Beam-Beam Effects”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP018, pp. 2522-2524.
[n] D. G. Myakishev and V. P. Yakovlev, “The New Possibilities of SuperLANS Code for Evaluation of Axisymmetric Cavities”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC17, pp. 2348-2350.
[n] A-M. Valente et al., “Production and Performance of the CEBAF Upgrade Cryomodule Intermediate Prototypes”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF072, pp. 1105-1107.
[n] E. Huttel et al., “Operation with a Low Emittance Optics at ANKA”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE037, pp. 2467-2469.
[n] E. Urakabe et al., “Performance of Parallel Plate Ionization Chamber for Medical Irradiation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P105, pp. 3819-3821.
[n] D. Okamoto, Y. Honda, and T. Sanuki, “Beam Orbit Tilt Monitor Studies at ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP022, pp. 3994-3996.
[n] A. A. Krasnov et al., “A Synchrotron Radiation Beamline Installed at BINP to Study the High Luminosity LHC Vacuum System”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 572-574. doi:10.18429/JACoW-RUPAC2016-THPSC017
[n] O. A. Nezhevenko, V. P. Yakovlev, A. K. Ganguly, and J. L. Hirshfield, “34-GHz Pulsed Magnicon for Linear Collider Application”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P033, pp. 3156-3158.
[n] K. Fuchsberger et al., “Determination of the Chromaticity of the TI 8 Transfer Line Based on Kick Response Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP038, pp. 3787-3789.
[n] M. Steck, C. Brandau, C. Dimopoulou, C. Kozhuharov, and F. Nolden, “A Novel Method for the Preparation of Cooled Rare Isotope Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD066, pp. 840-842.
[n] M. Craddock, D. Kaltchev, T. Risselada, and R. Servranckx, “Momentum Cleaning in the CERN LHC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP08C, pp. 353-355.
[n] N. Hubert, M. El Ajjouri, and D. P?®deau, “Test of New Beam Loss Monitors for SOLEIL”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 215-218. doi:10.18429/JACoW-IBIC2018-TUPA03
[n] Y. Li and L. Yu, “Applying Square Matrix to Optimize Storage Ring Nonlinear Lattice”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3241-3243. doi:10.18429/JACoW-IPAC2017-WEPIK122
[n] F. P?®rez, B. B. Baricevic, D. Einfeld, H. Hassanzadegan, A. Salom, and P. Sanchez, “New Developments for the RF System of the ALBA Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH141, pp. 1346-1348.
[n] A.-S. M??ller, I. Birkel, E. Huttel, M. Pont, F. P?®rez, and F. Zimmermann, “Investigation of Scraper Induced Wake Fields at ANKA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT069, pp. 2008-2010.
[n] O. A. Nezhevenko et al., “Recent Results from the X-Band Pulsed Magnicon Amplifier”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT027, pp. 1979-1981.
[n] C. Ronsivalle, C. R. Frascati, M. Ferrario, M. Migliorati, C. Vaccarezza, and M. Venturini, “Microbunching Studies for SPARX Photoinjector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP062, pp. 506-508.
[n] S. Mitsunobu et al., “Activities of Superconducting Cavities for KEK B-Factory”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95A08, pp. 47-49.
[n] Y. Kamiya, T. Koseki, N. Nakamura, and H. Takaki, “A Lattice for the Future Project of the VUV and Soft X-Ray High Brilliance Light Source VSX”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP03L, pp. 647-649.
[n] V. Baglin, I. R. Collins, O. Gr?Âbner, C. Gr??nhagel, and B. Jenninger, “First Results from COLDEX applicable to the LHC Cryogenic Vacuum System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B03, pp. 2283-2285.
[n] M. Endo et al., “Superconducting Quadrupole Magnet System for TRISTAN Mini-beta Insertions”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2257-2260.
[n] L. Catani et al., “Nb coating of copper cavities by UHV cathodic arc”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP70, pp. XX-XX.
[n] Y. Iwashita et al., “Study on Multilayer Thin Film Coating on Superconducting Cavity”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 215-216. doi:10.18429/JACoW-LINAC2016-MOPLR036
[n] F. W. Jones and H. O. Schonauer, “New Space-Charge Methods in Accsim and Their Application to Injection in the CERN PS Booster”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA148, pp. 2933-2935.
[n] S. Aumon, S. S. Gilardoni, O. Hans, and F. C. Peters, “Study of Beam Losses at Injection in the CERN Proton Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP034, pp. 3775-3777.
[n] Y. Iwashita, A. Noda, H. Okamoto, T. Shirai, and M. Inoue, “Cold Model Test of Biperiodic L-Support Disk-and-Washer Linac Structure”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA18, pp. 1093-1095.
[n] R. Xiang, A. Arnold, P. Murcek, J. Schaber, and J. Teichert, “Metal and Semiconductor Photocathodes in HZDR SRF Gun”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 142-144. doi:10.18429/JACoW-ERL2019-THCOYBS01
[n] Y. Iwashita et al., “Fabrication of Biperiodic DAW Cavity”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W029, pp. 1203-1205.
[n] K. Yamamoto et al., “Beam Instrumentation at the 1 MW Proton Beam of J-PARC RCS”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper WEO2AB03, pp. 278-282.
[n] H. Okamoto, K. Kojima, and Y. Tokashiki, “Stability Tune Diagram of a High-Intensity Hadron Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3141-3144. doi:10.18429/JACoW-IPAC2019-WEPTS022
[n] K. Asano et al., “HOM Absorbers of Superconducting Cavities for KEKB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP061L, pp. 2127-2129.
[n] F. Yan et al., “Investigation of Regulation Plan for the Vibration Utility Equipment of HEPS”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 136-139. doi:10.18429/JACoW-MEDSI2018-TUPH41
[n] W. Joho, P. Marchand, L. Rivkin, and A. Streun, “Desing of a Swiss Ligh Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 627-630.
[n] E. V. Kozyrev et al., “7 GHz Pulsed Magnicon: Study and New Results”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P018, pp. 3114-3116.
[n] G.-T. Park et al., “Status Update of a Harmonic Kicker Development for JLEIC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3047-3050. doi:10.18429/JACoW-IPAC2019-WEPRB099
[n] S. Anami et al., “Design and Construction of Long-Pulse Modulator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 2002-2005.
[n] P. Wesolowski, I. Birkel, E. Huttel, A.-S. M??ller, M. Pont, and F. P?®rez, “A Vertical Multi-Bunch Feedback System for ANKA”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP001, pp. 761-763.
[n] A.-S. M??ller et al., “Characterizing THz Coherent Synchrotron Radiation at the ANKA Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC046, pp. 2091-2093.
[n] P. Liu, C. Han, and F. Long, “Design of Fast Corrector Magnet Power Supply for HEPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1294-1296. doi:10.18429/JACoW-IPAC2019-TUPMP025
For LaTeX
Use Complete Form
For BibTeX
References
- S. D. Fartoukh, “Low-Beta Insertions Inducing Chromatic Aberrations in Storage Rings and their Local and Global Correction”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP037, pp. 3784-3786.
- D. J. Gibson et al., “Optimal Design of a Tunable Thomson-Scattering Based Gamma-Ray Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS030, pp. 1248-1250.
- G. Bisoffi et al., “Prototype of a Superconducting RFQ for a Heavy Ion Injector Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W023, pp. 1087-1089.
- K. Ammigan et al., “Experimental Results of Beryllium Exposed to Intense High Energy Proton Beam Pulses”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 102-105.
- V. Forte et al., “The PSB Operational Scenario with Longitudinal Painting Injection in the Post-LIU Era”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3331-3334.
- A. M. Lombardi, O. S. Br??ning, S. D. Fartoukh, T. Risselada, F. Schmidt, and A. Verdier, “Dynamic Aperture Reduction from the Dodecapole Component in the LHC Main Quadrupoles and its Mechanism.”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT026, pp. 1885-1887.
- S. M. White, H. Burkhardt, S. D. Fartoukh, and T. Pieloni, “Optimization of the LHC Separation Bumps Including Beam-Beam Effects”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP018, pp. 2522-2524.
- D. G. Myakishev and V. P. Yakovlev, “The New Possibilities of SuperLANS Code for Evaluation of Axisymmetric Cavities”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC17, pp. 2348-2350.
- A-M. Valente et al., “Production and Performance of the CEBAF Upgrade Cryomodule Intermediate Prototypes”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF072, pp. 1105-1107.
- E. Huttel et al., “Operation with a Low Emittance Optics at ANKA”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE037, pp. 2467-2469.
- E. Urakabe et al., “Performance of Parallel Plate Ionization Chamber for Medical Irradiation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P105, pp. 3819-3821.
- D. Okamoto, Y. Honda, and T. Sanuki, “Beam Orbit Tilt Monitor Studies at ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP022, pp. 3994-3996.
- A. A. Krasnov et al., “A Synchrotron Radiation Beamline Installed at BINP to Study the High Luminosity LHC Vacuum System”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 572-574.
- O. A. Nezhevenko, V. P. Yakovlev, A. K. Ganguly, and J. L. Hirshfield, “34-GHz Pulsed Magnicon for Linear Collider Application”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P033, pp. 3156-3158.
- K. Fuchsberger et al., “Determination of the Chromaticity of the TI 8 Transfer Line Based on Kick Response Measurements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP038, pp. 3787-3789.
- M. Steck, C. Brandau, C. Dimopoulou, C. Kozhuharov, and F. Nolden, “A Novel Method for the Preparation of Cooled Rare Isotope Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD066, pp. 840-842.
- M. Craddock, D. Kaltchev, T. Risselada, and R. Servranckx, “Momentum Cleaning in the CERN LHC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP08C, pp. 353-355.
- N. Hubert, M. El Ajjouri, and D. P?®deau, “Test of New Beam Loss Monitors for SOLEIL”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 215-218.
- Y. Li and L. Yu, “Applying Square Matrix to Optimize Storage Ring Nonlinear Lattice”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3241-3243.
- F. P?®rez, B. B. Baricevic, D. Einfeld, H. Hassanzadegan, A. Salom, and P. Sanchez, “New Developments for the RF System of the ALBA Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH141, pp. 1346-1348.
- A.-S. M??ller, I. Birkel, E. Huttel, M. Pont, F. P?®rez, and F. Zimmermann, “Investigation of Scraper Induced Wake Fields at ANKA”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT069, pp. 2008-2010.
- O. A. Nezhevenko et al., “Recent Results from the X-Band Pulsed Magnicon Amplifier”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT027, pp. 1979-1981.
- C. Ronsivalle, C. R. Frascati, M. Ferrario, M. Migliorati, C. Vaccarezza, and M. Venturini, “Microbunching Studies for SPARX Photoinjector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP062, pp. 506-508.
- S. Mitsunobu et al., “Activities of Superconducting Cavities for KEK B-Factory”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95A08, pp. 47-49.
- Y. Kamiya, T. Koseki, N. Nakamura, and H. Takaki, “A Lattice for the Future Project of the VUV and Soft X-Ray High Brilliance Light Source VSX”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP03L, pp. 647-649.
- V. Baglin, I. R. Collins, O. Gr?Âbner, C. Gr??nhagel, and B. Jenninger, “First Results from COLDEX applicable to the LHC Cryogenic Vacuum System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B03, pp. 2283-2285.
- M. Endo et al., “Superconducting Quadrupole Magnet System for TRISTAN Mini-beta Insertions”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2257-2260.
- L. Catani et al., “Nb coating of copper cavities by UHV cathodic arc”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP70, pp. XX-XX.
- Y. Iwashita et al., “Study on Multilayer Thin Film Coating on Superconducting Cavity”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 215-216.
- F. W. Jones and H. O. Schonauer, “New Space-Charge Methods in Accsim and Their Application to Injection in the CERN PS Booster”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA148, pp. 2933-2935.
- S. Aumon, S. S. Gilardoni, O. Hans, and F. C. Peters, “Study of Beam Losses at Injection in the CERN Proton Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP034, pp. 3775-3777.
- Y. Iwashita, A. Noda, H. Okamoto, T. Shirai, and M. Inoue, “Cold Model Test of Biperiodic L-Support Disk-and-Washer Linac Structure”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA18, pp. 1093-1095.
- R. Xiang, A. Arnold, P. Murcek, J. Schaber, and J. Teichert, “Metal and Semiconductor Photocathodes in HZDR SRF Gun”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 142-144.
- Y. Iwashita et al., “Fabrication of Biperiodic DAW Cavity”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W029, pp. 1203-1205.
- K. Yamamoto et al., “Beam Instrumentation at the 1 MW Proton Beam of J-PARC RCS”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper WEO2AB03, pp. 278-282.
- H. Okamoto, K. Kojima, and Y. Tokashiki, “Stability Tune Diagram of a High-Intensity Hadron Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3141-3144.
- K. Asano et al., “HOM Absorbers of Superconducting Cavities for KEKB”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP061L, pp. 2127-2129.
- F. Yan et al., “Investigation of Regulation Plan for the Vibration Utility Equipment of HEPS”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 136-139.
- W. Joho, P. Marchand, L. Rivkin, and A. Streun, “Desing of a Swiss Ligh Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 627-630.
- E. V. Kozyrev et al., “7 GHz Pulsed Magnicon: Study and New Results”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P018, pp. 3114-3116.
- G.-T. Park et al., “Status Update of a Harmonic Kicker Development for JLEIC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3047-3050.
- S. Anami et al., “Design and Construction of Long-Pulse Modulator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 2002-2005.
- P. Wesolowski, I. Birkel, E. Huttel, A.-S. M??ller, M. Pont, and F. P?®rez, “A Vertical Multi-Bunch Feedback System for ANKA”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP001, pp. 761-763.
- A.-S. M??ller et al., “Characterizing THz Coherent Synchrotron Radiation at the ANKA Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC046, pp. 2091-2093.
- P. Liu, C. Han, and F. Long, “Design of Fast Corrector Magnet Power Supply for HEPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1294-1296.
Back to search