Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Axelsson et al., “REXEBIS - A Charge Breeder for the REX-ISOLDE Post Accelerator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP05A, pp. 1412-1414.
[n] K. Nakajima et al., “Preliminary Polarization Measurement of TRISTAN Electron Beam”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1730-1733.
[n] J. Szewinski et al., “Contribution to the ESS LLRF System by Polish Electronic Group”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4026-4027. doi:10.18429/JACoW-IPAC2017-THPAB129
[n] Y. Yang et al., “Commissioning Progress of LEAF at IMP”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 42-45. doi:10.18429/JACoW-HIAT2018-MOPB05
[n] H. Okuno et al., “Hardware Commissioning Of The Riken Superconducting Ring Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 18-20.
[n] G. Schmidt, E. Kasel, D. Schirmer, and K. Wille, “Position Monitoring of Accelerator Components as Magnets and Beam Position Monitors”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM01, pp. XX-XX.
[n] H. Li et al., “Femtosecond Fiber Timing Distribution System for the Linac Coherent Light Source”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO37, pp. 583-587.
[n] Y. Kawashima et al., “Instabilities Related with RF Cavity in the Booster Synchrotron for NSLS-II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA078, pp. 2669-2671.
[n] R. C. Sah, “The Advanced Light Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3100-3103.
[n] H.-J. Kwon et al., “Operation of the PEFP 20MeV Proton Linac at KAERI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD050, pp. 798-800.
[n] T. G. Lucas et al., “Initial Testing of Techniques for Large Scale Rf Conditioning for the Compact Linear Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4548-4551. doi:10.18429/JACoW-IPAC2018-THPMK103
[n] M. S. Prokop, S. Kwon, S. Ruggles, and P. A. Torrez, “LANSCE-R Low Level RF Control System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS025, pp. 2388-2390.
[n] J. Cardona, D. Abell, and S. Peggs, “Studies on Sextupole Components Generated by Eddy Currents in the Rapid Cycling Medical Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG023, pp. 1059-1061.
[n] D. Noelle et al., “BPMs for the XFEL Cryo module”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB12, pp. 84-86.
[n] J. Bosser et al., “Recent Lead Ion Storage Tests on LEAR”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8B008, pp. 944-946.
[n] M. K. Eseev, A. G. Kobets, I. N. Meshkov, A. Yu. Rudakov, and S. Yakovenko, “Methods for Optimization of the Dynamics of the Storage of Positrons in the Surko Trap”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper WECOB01, pp. 81-84.
[n] J. Kettler, P. Hartmann, R. G. Heine, and T. Weis, “Fast Beam Dynamics Investigation Based on an ADC Filling Pattern Measurement”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH018, pp. 1034-1036.
[n] W. L. Huang, F. Li, L. Ma, S. Wang, and T. G. Xu, “Beam Charge Measurement and System Calibration in CSNS”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 122-125. doi:10.18429/JACoW-IBIC2018-MOPC04
[n] W. Booth et al., “A Modular Approach to Develop Standardized HVAC Control Systems with UNICOS CPC Framework”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 919-922. doi:10.18429/JACoW-ICALEPCS2015-WEPGF094
[n] G. Sattonnay, V. Baglin, S. Bilgen, and B. Mercier, “DYVACS (DYnamic VACuum Simulation) Code: Calculation of Gas Density Profiles in Presence of Electron Cloud”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1244-1247. doi:10.18429/JACoW-IPAC2019-TUPMP007
[n] T. Ladzinski, F. Havart, and B. Fernandez Adiego, “Renovation of the SPS Personnel Protection System: A Configurable Approach”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 394. doi:10.18429/JACoW-ICALEPCS2019-MOPHA078
[n] H. Guler et al., “Power Coupler Design for the LUCRECE Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3732-3735. doi:10.18429/JACoW-IPAC2018-THPAL041
[n] A. Kolomiets and A. S. Plastun, “RFQ With Improved Energy Gain”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB050, pp. 966-968.
[n] M. Martinello et al., “Anti-Q-slope enhancement in high-frequency niobium cavities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2707-2709. doi:10.18429/JACoW-IPAC2018-WEPML013
[n] H. Koiso et al., “Performance of the TRISTAN Computer Control Network”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2068-2071.
[n] J. J. Bisognano et al., “Use of the CEBAF Accelerator for IR and UV Free Electron Lasers”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-68, pp. 507-509.
[n] M. C. Hughes and J. W. Gray, “Static VAr Power Factor Correction for the ISIS Main Magnet Power Supply”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN105, pp. 410-412.
[n] O. R. Blanco-Garc?¡a et al., “Multi-Target Lattice for Muon Production From e? Beam Annihilation on Target”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 578-581. doi:10.18429/JACoW-IPAC2019-MOPRB003
For LaTeX
Use Complete Form
For BibTeX
References
- J. Axelsson et al., “REXEBIS - A Charge Breeder for the REX-ISOLDE Post Accelerator”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP05A, pp. 1412-1414.
- K. Nakajima et al., “Preliminary Polarization Measurement of TRISTAN Electron Beam”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1730-1733.
- J. Szewinski et al., “Contribution to the ESS LLRF System by Polish Electronic Group”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4026-4027.
- Y. Yang et al., “Commissioning Progress of LEAF at IMP”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 42-45.
- H. Okuno et al., “Hardware Commissioning Of The Riken Superconducting Ring Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 18-20.
- G. Schmidt, E. Kasel, D. Schirmer, and K. Wille, “Position Monitoring of Accelerator Components as Magnets and Beam Position Monitors”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM01, pp. XX-XX.
- H. Li et al., “Femtosecond Fiber Timing Distribution System for the Linac Coherent Light Source”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO37, pp. 583-587.
- Y. Kawashima et al., “Instabilities Related with RF Cavity in the Booster Synchrotron for NSLS-II”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA078, pp. 2669-2671.
- R. C. Sah, “The Advanced Light Source”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3100-3103.
- H.-J. Kwon et al., “Operation of the PEFP 20MeV Proton Linac at KAERI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD050, pp. 798-800.
- T. G. Lucas et al., “Initial Testing of Techniques for Large Scale Rf Conditioning for the Compact Linear Collider”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4548-4551.
- M. S. Prokop, S. Kwon, S. Ruggles, and P. A. Torrez, “LANSCE-R Low Level RF Control System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS025, pp. 2388-2390.
- J. Cardona, D. Abell, and S. Peggs, “Studies on Sextupole Components Generated by Eddy Currents in the Rapid Cycling Medical Synchrotron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG023, pp. 1059-1061.
- D. Noelle et al., “BPMs for the XFEL Cryo module”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB12, pp. 84-86.
- J. Bosser et al., “Recent Lead Ion Storage Tests on LEAR”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8B008, pp. 944-946.
- M. K. Eseev, A. G. Kobets, I. N. Meshkov, A. Yu. Rudakov, and S. Yakovenko, “Methods for Optimization of the Dynamics of the Storage of Positrons in the Surko Trap”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper WECOB01, pp. 81-84.
- J. Kettler, P. Hartmann, R. G. Heine, and T. Weis, “Fast Beam Dynamics Investigation Based on an ADC Filling Pattern Measurement”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH018, pp. 1034-1036.
- W. L. Huang, F. Li, L. Ma, S. Wang, and T. G. Xu, “Beam Charge Measurement and System Calibration in CSNS”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 122-125.
- W. Booth et al., “A Modular Approach to Develop Standardized HVAC Control Systems with UNICOS CPC Framework”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 919-922.
- G. Sattonnay, V. Baglin, S. Bilgen, and B. Mercier, “DYVACS (DYnamic VACuum Simulation) Code: Calculation of Gas Density Profiles in Presence of Electron Cloud”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1244-1247.
- T. Ladzinski, F. Havart, and B. Fernandez Adiego, “Renovation of the SPS Personnel Protection System: A Configurable Approach”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 394.
- H. Guler et al., “Power Coupler Design for the LUCRECE Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3732-3735.
- A. Kolomiets and A. S. Plastun, “RFQ With Improved Energy Gain”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB050, pp. 966-968.
- M. Martinello et al., “Anti-Q-slope enhancement in high-frequency niobium cavities”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2707-2709.
- H. Koiso et al., “Performance of the TRISTAN Computer Control Network”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2068-2071.
- J. J. Bisognano et al., “Use of the CEBAF Accelerator for IR and UV Free Electron Lasers”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-68, pp. 507-509.
- M. C. Hughes and J. W. Gray, “Static VAr Power Factor Correction for the ISIS Main Magnet Power Supply”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN105, pp. 410-412.
- O. R. Blanco-Garc?¡a et al., “Multi-Target Lattice for Muon Production From e? Beam Annihilation on Target”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 578-581.
Back to search