Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Kanareykin, P. Schoessow, and L. Sch?ñchter, “Progress towards an Experimental Test of an Active Microwave Medium Based Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS040, pp. 2463-2465.
[n] X. W. Dong, S.-I. Kurokawa, and K. Ohmi, “Simulation Study of Transverse Coupled-bunch Instabilities due to Electron Cloud in KEKB LER”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH049, pp. 2895-2897.
[n] J. Norem, P. Bauer, J. Sebastian, and D. N. Seidman, “Atom Probe Tomography Studies of RF Materials”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAC008, pp. 612-614.
[n] S. P. Moeller, “Design and first operation of the electrostatic storage ring, ELISA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THZ01A, pp. 73-77.
[n] L. Wang, H. Fukuma, S.-I. Kurokawa, M. T. F. Pivi, and G. X. Xia, “A Perfect Electrode to Suppress Secondary Electrons inside the Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS003, pp. 1489-1491.
[n] D. Boussard and Y. Mizumachi, “Production of Beams with High Line-Density by Azimuthal Combination of Bunches in a Synchrotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3623-3626.
[n] O. R. Blanco-Garc?¡a et al., “Multi-Target Lattice for Muon Production From e? Beam Annihilation on Target”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 578-581. doi:10.18429/JACoW-IPAC2019-MOPRB003
[n] Y. Yonemura et al., “Status of Center for Accelerator and Beam Applied Science of Kyushu University”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP070, pp. 3521-3523.
[n] I. V. Kalagin et al., “Status of JINR FLNR cyclotrons”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 23-27. doi:10.18429/JACoW-HIAT2018-MOOXA01
[n] Y. T. Oganessian et al., “Modernization of the U400 Cyclotron at the FLNR JINR”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10012, pp. XX-XX.
[n] M. Satoh, K. Furukawa, T. Kudou, S. Kusano, and T. Suwada, “EPICS IOC of WindowsXP-based Oscilloscope for Fast BPM Data Acquisition System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP086, pp. 567-569.
[n] D. W. Storey, R. E. Laxdal, and N. Muller, “Alternative Fabrication Methods for the ARIEL e-Linac SRF Separator Cavity”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB043, pp. 1185-1186.
[n] I. Ben-Ziv, M. Berk, D. Bernstein, H. Feldman, Y. Gal, and J. S. Sokolowski, “Subnanosecond Chopper-Buncher System for Heavy Ions”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3436-3439.
[n] S. Morales Vigo et al., “Calibration of the LHC Diamond beam loss monitors for LHC Run 3”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4641-4644. doi:10.18429/JACoW-IPAC2023-THPL085
[n] S. Koda, Y. Iwasaki, T. Kaneyasu, and Y. Takabayashi, “Progress and Status of Synchrotron Radiation Facility SAGA Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA040, pp. 2579-2581.
[n] H. Witte, J. S. Berg, and M. L. Lopes, “Progress on the Dipole Magnet for a Rapid Cycling Synchrotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1322-1324. doi:10.18429/JACoW-IPAC2014-TUPRO115
[n] N. Yamamoto, M. Hosaka, A. Mano, T. Takano, Y. Takashima, and M. Katoh, “Design Study of Pulsed Multipole Injection for Aichi SR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1962-1964. doi:10.18429/JACoW-IPAC2014-WEPRO011
[n] Y. Mori, H. Arima, N. Ikeda, Y. Yonemura, and Y. Waga, “Harmonictron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1063-1065. doi:10.18429/JACoW-IPAC2018-TUPAL029
[n] S. Takeda et al., “Real Time Bunch Shape Measurements in the Osaka Single Bunch Electron Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 772-775.
[n] A. Kanareykin, S. P. Antipov, P. Schoessow, and L. Sch?ñchter, “X-band PASER Experiment”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP140, pp. 2824-2826.
[n] K. P. Wootton et al., “Design and Optimisation of Dielectric Laser Deflecting Structures”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2698-2701. doi:10.18429/JACoW-IPAC2015-WEPJE012
[n] H. Okita et al., “Beam Optics Study on FFA-MERIT Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 613-615. doi:10.18429/JACoW-IPAC2019-MOPRB019
For LaTeX
Use Complete Form
For BibTeX
References
- A. Kanareykin, P. Schoessow, and L. Sch?ñchter, “Progress towards an Experimental Test of an Active Microwave Medium Based Accelerator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS040, pp. 2463-2465.
- X. W. Dong, S.-I. Kurokawa, and K. Ohmi, “Simulation Study of Transverse Coupled-bunch Instabilities due to Electron Cloud in KEKB LER”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH049, pp. 2895-2897.
- J. Norem, P. Bauer, J. Sebastian, and D. N. Seidman, “Atom Probe Tomography Studies of RF Materials”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAC008, pp. 612-614.
- S. P. Moeller, “Design and first operation of the electrostatic storage ring, ELISA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THZ01A, pp. 73-77.
- L. Wang, H. Fukuma, S.-I. Kurokawa, M. T. F. Pivi, and G. X. Xia, “A Perfect Electrode to Suppress Secondary Electrons inside the Magnets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS003, pp. 1489-1491.
- D. Boussard and Y. Mizumachi, “Production of Beams with High Line-Density by Azimuthal Combination of Bunches in a Synchrotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3623-3626.
- O. R. Blanco-Garc?¡a et al., “Multi-Target Lattice for Muon Production From e? Beam Annihilation on Target”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 578-581.
- Y. Yonemura et al., “Status of Center for Accelerator and Beam Applied Science of Kyushu University”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP070, pp. 3521-3523.
- I. V. Kalagin et al., “Status of JINR FLNR cyclotrons”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 23-27.
- Y. T. Oganessian et al., “Modernization of the U400 Cyclotron at the FLNR JINR”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10012, pp. XX-XX.
- M. Satoh, K. Furukawa, T. Kudou, S. Kusano, and T. Suwada, “EPICS IOC of WindowsXP-based Oscilloscope for Fast BPM Data Acquisition System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP086, pp. 567-569.
- D. W. Storey, R. E. Laxdal, and N. Muller, “Alternative Fabrication Methods for the ARIEL e-Linac SRF Separator Cavity”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB043, pp. 1185-1186.
- I. Ben-Ziv, M. Berk, D. Bernstein, H. Feldman, Y. Gal, and J. S. Sokolowski, “Subnanosecond Chopper-Buncher System for Heavy Ions”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3436-3439.
- S. Morales Vigo et al., “Calibration of the LHC Diamond beam loss monitors for LHC Run 3”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL085, pp. 4641-4644.
- S. Koda, Y. Iwasaki, T. Kaneyasu, and Y. Takabayashi, “Progress and Status of Synchrotron Radiation Facility SAGA Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA040, pp. 2579-2581.
- H. Witte, J. S. Berg, and M. L. Lopes, “Progress on the Dipole Magnet for a Rapid Cycling Synchrotron”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1322-1324.
- N. Yamamoto, M. Hosaka, A. Mano, T. Takano, Y. Takashima, and M. Katoh, “Design Study of Pulsed Multipole Injection for Aichi SR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1962-1964.
- Y. Mori, H. Arima, N. Ikeda, Y. Yonemura, and Y. Waga, “Harmonictron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1063-1065.
- S. Takeda et al., “Real Time Bunch Shape Measurements in the Osaka Single Bunch Electron Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 772-775.
- A. Kanareykin, S. P. Antipov, P. Schoessow, and L. Sch?ñchter, “X-band PASER Experiment”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP140, pp. 2824-2826.
- K. P. Wootton et al., “Design and Optimisation of Dielectric Laser Deflecting Structures”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2698-2701.
- H. Okita et al., “Beam Optics Study on FFA-MERIT Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 613-615.
Back to search