JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Theilacker et al., “Fermilab Energy Saver Refrigeration System Tests”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3257-3260. 
[n]	G. Iadarola et al., “Detailed Studies of Beam Induced Scrubbing in the CERN-SPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3908-3910. doi:10.18429/JACoW-IPAC2015-THPF091
[n]	M. Pekeler et al., “Industrial Production of Turn Key Superconducting Accelerator Modules for High Current Storage Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH166, pp. 1172-1174. 
[n]	F. J. Kriegler, “Dynamic Effects of Higher RF Harmonics”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART2-8, pp. 204-213. 
[n]	I. Konkashbaev, P. F. Fisher, A. Hassanein, and N. V. Mokhov, “Enhancement of Heat Removal using Concave Liquid Metal Targets for High-Power Accelerators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN089, pp. 2915-2917. 
[n]	C. E. Hill, “Operational Experience with the CERN Hadron Linacs”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP16, pp. 360-362. 
[n]	J. P. Edelen, E. G. Carlin, M. V. Keilman, P. Moeller, and R. Nagler, “A cloud based toolbox for accelerator controls interfaces and optimization”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper THPV017, unpublished. 
[n]	H. C. Hoyt, “Numerical Studies of the Shapes of Drift Tubes and Linac Cavities”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 153-156. 
[n]	C. Dimopoulou et al., “Experimental Demonstration of Longitudinal Ion Beam Accumulation with Electron Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP048, pp. 3470-3472. 
[n]	A. D. Ghodke and D. Angal-Kalinin and G Singh, “KICKER CHAMBER METALLIZATION INDUCED EFFECTS ON THE BEAM IN INDUS-1”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THCM04, pp. XX-XX. 
[n]	D. Berkaev, O. Belikov, V. Kozak, P. Shatunov, and A. Medvedko, “SYSTEM OF POWER SUPPLY RIPPLES MEASUREMENT FOR VEPP-2000 COLLIDER”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH12, pp. XX-XX. 
[n]	B. E. Chase and R. J. Pasquinelli, “VXI Based Low Level RF System for Fermilab Linac Upgrade”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2355-2358. 
[n]	I. V. Konoplev et al., “2D and 1D Surface Photonic Band Gap Structures for Accelerator Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH155, pp. 1388-1390. 
[n]	W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921. 
[n]	S. D. Nelson, R. J. Briggs, G. J. Caporaso, A. Friedman, B. R. Poole, and W. Waldron, “Electromagnetic Simulations of Helical-Based Ion Acceleration Structures”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT037, pp. 2485-2487. 
[n]	A. Piwinski, “Computer Simulation of the Beam-Beam Interaction at a Crossing Angle”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2240-2243. 
[n]	I. Miura, E. Minehara, Y. Mashima, S. Yoshizawa, R. Nagai, and M. Takeuchi, “Measurements of the Microwave Surface Resistance of Bi2Sr2CaCu2Ox Superconductor on Silver Substrate Using a Half-wave Coaxial Cavity Resonator”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91G01, pp. XX-XX. 
[n]	W. Xu et al., “Progress of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 64-66. doi:10.18429/JACoW-SRF2017-MOPB009
[n]	N. R. Lobanov, M. C. Blacksell, P. Linardakis, and D. Tsifakis, “Terminal Voltage Stabilization of Pelletron Tandem Accelerator”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper TUB03, pp. 124-128. 
[n]	W. F. Bergan, P. Baxevanis, M. Blaskiewicz, G. Stupakov, and E. Wang, “Design of an MBEC Cooler for the EIC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1819-1822. doi:10.18429/JACoW-IPAC2021-TUPAB179
[n]	J. Chen, L. W. Lai, Y. B. Leng, T. Wu, and R. X. Yuan, “A Beam Based Method to Optimize the SBPM System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4780-4783. doi:10.18429/JACoW-IPAC2018-THPML062
[n]	J. Kirchgessner, “The Use of Superconducting RF for High Current Applications”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93E01, pp. XX-XX. 
[n]	J. Forrestal et al., “Access Control and Interlock System at the Advanced Photon Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P055, pp. 3669-3671. 
[n]	E. J. Bleser et al., “Operation of the NAL Main Ring Extraction System”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 502-505. 
[n]	V. Pirozhenko et al., “Compact Electron Linacs for Radiation Technology Systems”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH031, pp. 2515-2517. 
[n]	S. X. Peng et al., “Design of a 2.45 GHz Surface Wave Plasma Source for Plasma Flood Gun”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 143-145. doi:10.18429/JACoW-ECRIS2020-WEYZO02
[n]	E. G. Auld, S. Oraas, A. J. Otter, G. H. Mackenzie, J. R. Richardson, and J. J. Burgerjon, “Design of the 4000 ton Magnet for the TRIUMF Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A13, pp. XX-XX. 
[n]	B. G. Chidley, R. M. Hutcheon, and G. E. McMichael, “A Heavy Ion RFQ with High Accelerating Gradient”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-43, pp. 361-363. 
[n]	W. Xu et al., “Status of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 688-690. doi:10.18429/JACoW-LINAC2018-THPO006
[n]	H. C. Ho et al., “An Assembling Calibration Method of XBPM Diamond Blades in TPS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 54-56. doi:10.18429/JACoW-MEDSI2016-MOPE23
[n]	A. M. Kozodaev et al., “Program of Activities for the Linac-Driver of ITEP Subcritical Facility”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P117, pp. 3848-3850. 
[n]	J. Cai, E. S. McCrory, D. J. Nicklaus, and T. B. Bolshakov, “SDA Time Intervals”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOPA02, pp. 79-81. 
[n]	T. Chen, W. Li, and Y. J. Pei, “Design of the Condenser System and Imaging System for a UEM”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3485-3487. doi:10.18429/JACoW-IPAC2019-THPMP016
[n]	C. Benedetti, G. Franchetti, I. Hofmann, and G. Turchetti, “Transverse Mismatch Oscillations of a Bunched Beam in Presence of Space Charge and External Nonlinearities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC086, pp. 3188-3190. 
[n]	T. Spickermann et al., “Comparison of Carbon Stripper Foils Under Operational Conditions at the Los Alamos Proton Storage Ring”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC02, pp. 262-264. 
[n]	G. Feng, W. Fan, W. W. Gao, W. Li, L. Wang, and S. C. Zhang, “Conceptual Design of Injection System for Hefei Light Source (HLS) Upgrade Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC030, pp. 1785-1787. 
[n]	A. Hofmann et al., “The Green Energy Turbine as Turbo Generator for Powering the HV-Solenoids at a Relativistic Electron Cooler”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF02, pp. 29-31. 
[n]	B. J. Holzer, K. D. J. Andr?®, S. A. Bogacz, O. S. Br??ning, and M. Klein, “Accelerator Challenges of the LHeC Project”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2570-2573. doi:10.18429/JACoW-IPAC2021-WEPAB001
[n]	D. Tong, L. Xiao, and Y. Ni, “Non-Intrusive Diagnosis of Individual Cell Frequencies in a Cavity Chain”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E206, pp. 626-630. 
[n]	G. Olry, “Recent Progress of ESS Spoke and Elliptical Cryomodules”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUAA06, pp. 474-480. 
[n]	G. Kourkafas, T. Kamps, A. Neumann, and B. Keune, “Transverse Deflecting Cavity for Longitudinal Beam Diagnostics at BERLinPro”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 875-878. doi:10.18429/JACoW-LINAC2018-THPO083
[n]	R. E. Olsen, “A High Performance Digital Triggering System for Phase Controlled Rectifiers”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2867-2870. 
[n]	A. Boggia, G. Brautti, A. P. Errico, A. Rain, V. Valentino, and V. Variale, “Study of a Trapped Ion Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP01B, pp. 1433-1435. 
[n]	F. Chautard et al., “GANIL Status Report”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT052, pp. 1270-1272. 
[n]	G. Jackson, “Analysis of the Tevatron Collider Beam Spectrum for Bunched Beam Stochastic Cooling”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP20, pp. 2931-2933. 
[n]	K. B. Mallory, “Control Through a System of Small Computers”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1086-1088. 
[n]	Y. Sun et al., “BEPCII Superconducting RF System Operation Status”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO062, pp. 247-250. 
[n]	F. Antoniotti et al., “Developments on the SCADA of CERN Accelerators Vacuum”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC030, pp. 135-138. 
[n]	C. E. Hill, “Operation of a Short Pulse Negative Ion Source”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-42, pp. 358-360. 
[n]	D. Nguyen, M. Lee, R. Sass, and H. Shoaee, “Accelerator and Feedback Control Simulation Using Neural Networks”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1437-1440. 
[n]	W. Cheng, A. Brill, and X. Sun, “Status of the transverse bunch-by-bunch feedback system at APS-U storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3311-3313. doi:10.18429/JACoW-IPAC2024-THPG28
[n]	M. Plesko, “An Interactive Graphical Model for the Design and Control of a Transfer Line”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 735-738. 
[n]	V. L. Smirnov and S. B. Vorozhtsov, “A Coupled Cyclotron Solution for Carbon Ions Acceleration”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 270-273. doi:10.18429/JACoW-Cyclotrons2016-WEB04
[n]	S. A. Medley, I. D. Finch, S. M. Malinowski, and M. Romanovschi, “Developing an Alarm Philosophy for the EPICS Control System at ISIS”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper THPV016, unpublished. 
[n]	A. Gotz et al., “Building a Data Analysis as a Service Portal”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1229. doi:10.18429/JACoW-ICALEPCS2019-WEPHA057
[n]	H. H. Lu et al., “Development of the First U48 Undulator Prototype for the European X-ray Free Electron Laser”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPB18, pp. 420-423. 
[n]	T. Antaya, P. Miller, and D. Poe, “K-500 Superconducting Cyclotron Deflector High Voltage Tests”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2982-2985. 
[n]	J. Wei et al., “FRIB Accelerator Status and Challenges”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TU1A04, pp. 417-421. 
[n]	A. Schnase, F. J. Etzkorn, and H. Meuth, “An RF-Synthesizer for Fundamental and Precisely Adjusted Higher Harmonics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1963-1966. 
[n]	R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2579-2582. 
[n]	M. T. Lynch, “Control of Linear Accelerator Noise in the Los Alamos Free-Electron Laser (FEL)”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-10, pp. 59-61. 
[n]	M. Di Giacomo, “Solid State RF Amplifiers for Accelerator Applications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4RAI01, pp. 757-761. 
[n]	D. Reynet et al., “Design of the ESS Spoke Cryomodule”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP089, pp. 357-360. 
[n]	M. Jaski, C. Doose, J. Humbert, K. Thompson, and R. Wright, “New Synchrotron Injection Septum Magnet at the APS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH007, pp. 3230-3232. 
[n]	W. Schappert, J. P. Holzbauer, and Y. M. Pischalnikov, “Progress at FNAL in the Field of the Active Resonance Control for Narrow Bandwidth SRF Cavities.”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3355-3357. doi:10.18429/JACoW-IPAC2015-WEPTY036
[n]	J. F. Schmidt, O. Boldt, F. Frommberger, W. Hillert, and J.-P. Thiry, “Optimizing Polarization with an Improved Integer Resonance Correction Scheme at ELSA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1108-1110. doi:10.18429/JACoW-IPAC2014-TUPRO039
[n]	P. Charrue and H. Schmickler, “The Status of the LHC Controls System Shortly Before Injection of Beam”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOAB01, pp. 5-9. 
[n]	M. Sachwitz, A. Hofmann, S. Pauliuk, K. I. Tiedtke, and H. Wabnitz, “Ionisation Profile Monitor to Determine Spatial and Angular Stability of FEL Radiation of FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC090, pp. 1266-1268. 
[n]	P. Tallerico et al., “An RF-Driven Lasertron”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-02, pp. 528-530. 
[n]	A. F. Press, M. A. Jaworski, D. C. Moir, and S. Szustkowski, “Experimental Verification of DARHT Axis 1 Injector PIC Simulations”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2183-2185. doi:10.18429/JACoW-IPAC2022-WEPOTK054
[n]	W. Bialowons et al., “Computer Simulations of the Wake Field Transformer Experiment at DESY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 902-905. 
[n]	R. Bassini, C. Birattari, M. Bonardi, M. Castiglioni, and M. Silari, “An Absolute Method for the Energy Calibration of Cyclotron Beams”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-05, pp. 291-294. 
[n]	A.Drago, “TRENDS IN FAST FEEDBACK R&D”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH12, pp. XX-XX. 
[n]	J. Y. Li, C. Diao, W. Li, G. Liu, Z. P. Liu, and B. G. Sun, “Closed Orbit Correction of HLS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH011, pp. 1255-1257. 
[n]	F. Galluccio and F. Schmidt, “Slow Particle Loss in Hadron Colliders”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 640-643. 
[n]	W. Praeg and D. McGhee, “Power Supplies for the Ring Magnets of the Synchrotron X-Ray Source at ANL”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1526-1529. 
[n]	B. N. Gikal, G. G. Gulbekian, and V. B. Kutner, “Recent Developments at Dubna U400 and U400M Cyclotrons”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-01, pp. 587-591. 
[n]	T. Kikuchi, K. Horioka, T. Katayama, and S. Kawata, “Application of Selected Momentum Correction Method Using Induction Voltage Modulator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT043, pp. 2762-2764. 
[n]	R. Kammering and Ch. Schmidt, “Feedbacks and Automation at the Free Electron Laser in Hamburg (FLASH)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC121, pp. 1345-1347. 
[n]	A. Bungau, R. J. Barlow, J. R. Alonso, J. M. Conrad, J. Spitz, and M. Shaevitz, “Optimisation Studies of a High Intensity Electron Antineutrino Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI073, pp. 449-451. 
[n]	E. Bravin, B. Dehning, and G. Mugnai, “Energy Calibration at LEP using Nuclear Magnetic Resonance Probes”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP05H, pp. 388-390. 
[n]	P. Dolegieviez, R. Ferdinand, X. Ledoux, H. Savajols, and F. Varenne, “Status of the SPIRAL2 Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 844-847. doi:10.18429/JACoW-IPAC2019-MOPTS005
[n]	O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “A New Correction Scheme to Compensate Depolarizing Integer Resonances at ELSA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP003, pp. 1507-1509. 
[n]	A.Blinov; A.Bogomyagkov; A.Bondar; V.Kiselev; I.Koop; G.Kurkin; E.Levichev; P.Logachev; S.Nikitin; I.Okunev; V.M.Petrov; P.Piminov; Yu.Pupkov; D.Shatilov; S.Sinyatkin; V.Smaluk; A.Skrinsky; P.Vobly, “THE PROJECT OF T-CHARM FACTORY WITH CRAB WAIST”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper WEACH09, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search