JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. H. Maclean, T. Persson, and R. Tomas, “Amplitude Dependent Closest Tune Approach Generated by Normal and Skew Octupoles”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3147-3150. doi:10.18429/JACoW-IPAC2017-WEPIK091
[n]	D. Gonnella and M. Liepe, “High Q0 Studies at Cornell”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP027, pp. 478-482. 
[n]	E. W. Vogt and J. R. Richardson, “An H- Meson Facility”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper E-001, pp. XX-XX. 
[n]	C. A. Swenson, Y. Huang, F. R. Huson, and R. Rocha, “Status of Compact Synchrotron Light Source Work at TAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2649-2652. 
[n]	C. E. Adolphsen, K. L. F. Bane, W. L. Spence, and M. D. Woodley, “Collective Centroid Oscillations as an Emittance Preservation Diagnostic in Linear Collider Linacs”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5V036, pp. 1673-1675. 
[n]	E. Forton et al., “Structural and Magnetic Properties of Cast Iron for Cyclotrons”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU4PB02, pp. 275-277. 
[n]	D. Gonnella, F. Furuta, and M. Liepe, “Heat Treatment of SRF Cavities in a Low-Pressure Atmosphere”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP029, pp. 487-489. 
[n]	P. W. Schmor, “A Review of Polarized Ion Sources for Cyclotrons (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-04, pp. 316-321. 
[n]	D. Shuman, A. Faltens, M. Kireeff Covo, G. Ritchie, and P. A. Seidl, “A Compact High Gradient Pulsed Magnetic Quadrupole”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT068, pp. 3771-3773. 
[n]	J. E. Spencer et al., “Beam Dynamics Measurements for the SLAC Laser Acceleration Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS055, pp. 3115-3117. 
[n]	H. J. Kwon, Y. S. Cho, J. M. Han, and B. H. Choi, “RF System for KOMAC RFQ”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH454, pp. 725-727. 
[n]	S. Eylon, E. Henestroza, J.-S. Kim, T. L. Houck, G. A. Westenskow, and S. S. Yu, “Longitudinal Impedance Measurements of an RK-TBA Induction Accelerating Gap”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P046, pp. 3719-3721. 
[n]	Y. Xu and R. Seviour, “Design of Photonic Crystal Klystrons”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB057, pp. 4002-4004. 
[n]	D. A. Dimitrov et al., “Modeling of Diamond Based Devices for Beam Diagnostics”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP162, pp. 1794-1796. 
[n]	Q. Wu and I. Ben-Zvi, “Optimization of Higher Order Mode Dampers in the 56 MHz SRF Cavity for RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC086, pp. 3081-3083. 
[n]	S. Machida, “A Fixed Field Alternating Gradient Accelerator With Long Straight Sections”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC044, pp. 558-560. 
[n]	V. Volkov et al., “Nuclotron Extracted Beam Spill Control”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT095, pp. 2718-2720. 
[n]	W. Scandale, “Non-Linear Single Particle Beam Dynamics in Circular Machines”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 264-269. 
[n]	I. S. K. Gardner, “A Review of Spallation Neutron Source Accelerators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUX03B, pp. 98-102. 
[n]	D. E. Johnson, “The Bzero Low-Beta Insertion Design for the Tevatron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1672-1675. 
[n]	Y. Yang et al., “Study Progress of Pulse Laser Annealing for Niobium Film on Copper”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 438-441. doi:10.18429/JACoW-LINAC2018-TUPO048
[n]	Y. I. Eidelman, S. Nagaitsev, and N. Solyak, “SCREAMm ÔÇô Modified Code SCREAM to Simulate the Acceleration of a Pulsed Beam Through the Superconducting Linac”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO066, pp. 258-261. 
[n]	D. Trbojevic, C. Ankenbrandt, and I. Kourbanis, “Modification of the Horizontal Dispersion in the Fermilab Main Ring with Additional Quadrupoles”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 99-102. 
[n]	Y. I. Eidelman, N. V. Mokhov, S. Nagaitsev, and N. Solyak, “A New Approach to Calculate the Transport Matrix in RF cavities”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP131, pp. 1725-1727. 
[n]	F. Antoniou et al., “Optics Design Optimization for IBS Dominated Beams”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO1B02, pp. 386-390. 
[n]	S. Redaelli et al., “The Online Model for the Large Hadron Collider”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC011, pp. 480-482. 
[n]	D. E. Johnson and M. Xiao, “The Concept Design of a New Transfer Line from Booster to Recycler for the Fermilab Proton Plan Phase 2 Campaign”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS038, pp. 1727-1729. 
[n]	C. Montag, D. Bruno, A. K. Jain, G. Robert-Demolaize, T. Satogata, and S. Tepikian, “Mimicking Bipolar Sextupole Power Supplies for Low-energy Operations at RHIC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP061, pp. 2241-2242. 
[n]	E. Schneidmiller and M. V. Yurkov, “Coherence Properties of the Odd Harmonics of the Radiation from SASE FEL with Planar Undulator”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD08, pp. 65-68. 
[n]	N. Inabe and T. Katayama, “Design of Double Storage Rings at MUSES”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP036L, pp. 926-928. 
[n]	N. Liu et al., “Development Status of RF Reference Phase Stabilization System for SuperKEKB Injector LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3879-3881. doi:10.18429/JACoW-IPAC2019-THPRB033
[n]	S. De Santis, A. Aryshev, J. M. Byrd, T. Naito, M. C. Ross, and J. Urakawa, “Coherent Synchrotron Radiation Studies at the Accelerator Test Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH067, pp. 2940-2942. 
[n]	P. Echevarria, J. Knobloch, A. Neumann, A. Ushakov, E. Aldekoa, and J. Jugo, “SRF Cavity Simulator for LLRF Algorithms Debugging”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2118-2120. doi:10.18429/JACoW-IPAC2018-WEPAK013
[n]	J.-B. Lallement, “Experience with the Construction and Commissioning of Linac4”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 342-347. doi:10.18429/JACoW-LINAC2016-TU1A03
[n]	Y. Alexahin et al., “Low Emittances Lattices for LEP”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6B008, pp. 312-314. 
[n]	R. Xiang et al., “Runing Status of SRF Gun II at the ELBE Radiation Center”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 952-954. doi:10.18429/JACoW-LINAC2018-THPO125
[n]	L. Lilje et al., “Electropolishing and in-situ Baking of 1.3 GHz Niobium Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUA001, pp. 74-76. 
[n]	A. Seibel, C. M. Kleffner, K. Knie, U. Ratzinger, and M. Vossberg, “Comparison Between Measurement and Simulation of a Full Scale Prototype for the Proton Injector at FAIR”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 940-942. doi:10.18429/JACoW-IPAC2019-MOPTS037

For LaTeX

Use Complete Form

For BibTeX

References

Back to search