Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. R. R?Ânsch et al., “Measurement of the Longitudinal Phase Space at the Photo Injector Test Facility at DESY in Zeuthen (PITZ)”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM016, pp. XX-XX.
[n] H. Kaji, T. Naito, S. Sasaki, and Y. Iitsuka, “Time Synchronization for Distant IOCs of the SuperKEKB Accelerators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3982-3985. doi:10.18429/JACoW-IPAC2017-THPAB113
[n] R. V. Hariwal, S. Kedia, R. Mehta, H. K. Malik, and V. A. Verzilov, “Design, Fabrication and Testing of Compact Diagnostic System at IUAC”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper FRM1C04, pp. 294-296.
[n] P. J. Giansiracusa, M. J. Boland, M. P. Lafky, T. G. Lucas, R. P. Rassool, and M. Volpi, “The Effect of the SLED Installation on Extracted and Lost Beam at the Australian Synchrotron Linac.”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2794-2797. doi:10.18429/JACoW-IPAC2019-WEPRB001
[n] S. K. Mohanty, G. Guerini Rocco, P. Michelato, L. Monaco, C. Pagani, and D. Sertore, “Development of a Multialkali Antimonide Photocathode at INFN LASA”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 448-451. doi:10.18429/JACoW-FEL2019-WEP053
[n] A. J. Favale, M. D. Cole, E. Peterson, and J. Rathke, “Fabrication of ILC Prototype Cavities at Advanced Energy Systems, Inc.”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD002, pp. 448-450.
[n] C. Pillai et al., “Performance of the LANSCE H$^-$ Source and Low Energy Beam Transport at Higher Peak Current”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W021, pp. 2743-2745.
[n] P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742.
[n] E. Kako et al., “Characteristics of the Results of Measurement on 1.3 GHz High Gradient Superconducting Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C12, pp. 425-429.
[n] A. Adelmann, S. R. A. Adam, H. Fitze, R. Geus, M. Humbel, and L. Stingelin, “On Start to End Simulation and Modeling Issues of the Megawatt Proton Beam Facility at PSI”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT055, pp. 3319-3321.
[n] P. von Rossen, K. Euler, and F. Hinterberger, “A New Method for High Precision Dee Voltage Stabilization”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J10, pp. 371-372.
[n] A. N. Dubrovin and A. A. Zholents, “A Combined Symmetric and Asymmetric B-factory with Monochromatization”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2835-2838.
[n] P. Gladkikh, I. Karnaukhov, A. Shcherbakov, Yu. Telegin, and A. Zelinsky, “Beam Dynamics Simulation in the Storage Ring N-100 with Electron-photon Interactions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2A12, pp. 1199-1201.
[n] H. Park, S. U. De Silva, J. R. Delayen, and S. I. Sosa Guitron, “Design of a Proof-of-principle Crabbing Cavity for the Jefferson Lab Electron-ion Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3027-3030. doi:10.18429/JACoW-IPAC2019-WEPRB093
[n] R. W. Roeth, H. Heinrichs, V. G. Kurakin, G. Mueller, H. Piel, and J. Pouryamout, “Suppression of Field Emission in Superconducting S-Band Acceleration Structures”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1097-1100.
[n] T. Honda et al., “Results of the Straight-sections Upgrade of the Photon Factory Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS036, pp. 3365-3367.
[n] A. I. Pikin et al., “Recent Results with Au Ions Extracted from an EBIS using an 8A Electron Beam at BNL”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI002, pp. 1732-1734.
[n] H. Sakaki et al., “Calculation of Radiation Shielding for Laser-driven Hadron Beams Therapeutic Instrument”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA015, pp. 94-96.
[n] T. S. Dixit, Y. Shimosaki, and K. Takayama, “Adiabatic Damping of the Bunch-length in the Induction Synchrotron”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA099, pp. 244-246.
[n] G. B. Shen, “A Modular Environment for High Level Applications”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP094, pp. 859-861.
[n] D. Walz et al., “Tests and Description of Beam Containment Devices and Instrumentation-A New Dimension in Safety Problems”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 465-472.
[n] A. G. Afonin, V. N. Gres, and V. I. Terekhov, “Wide Range Extracted Beam Intensity Measurement at the IHEP”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP02D, pp. 1613-1614.
[n] V. A. Maisheev et al., “Research of Photon Emission of 120 GeV Channeling Positrons”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB001, pp. 172-174.
[n] C. Boccard et al., “Performance of the new SPS beam position orbit system (MOPOS)”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PS12, pp. XX-XX.
[n] K. Saito et al., “Superiority of Electropolishing over Chemical Polishing on High Gradients”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D02, pp. 795-813.
[n] W. Lawson et al., “The Design of a High Power Gyroklystron for Supercollider Applications”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1904-1907.
[n] A. Adelmann, S. R. A. Adam, M. Humbel, and P. A. Schmelzbach, “High Intensity Cyclotron Simulations: Towards Quantitative Predictions”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAX04, pp. 202-204.
[n] V. Vogel, L. Butkowski, A. Cherepenko, S. Choroba, I. Harders, and J. Hartung, “Results of Testing of Multi-beam Klystrons for the European XFEL”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB004, pp. 479-481.
[n] A. Chakrabarti, “Radioactive Ion Beams Programme at Vecc Kolkata, Indian Efforts”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper FRM2I01, pp. 300-303.
[n] T. Tominaka et al., “Design Study of the Injection and Extraction Elements for the RIKEN Superconducting Ring Cyclotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P019, pp. 3440-3442.
[n] V. Ranjbar, S. Y. Lee, M. Bai, E. Courant, and W. W. MacKay, “Mapping Out the Full Spin Resonance Structure of RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH139, pp. 3177-3179.
[n] B. Sayyar-Rodsari et al., “Parametric Modeling of Transverse Phase Space of an RF Photoinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN101, pp. 3462-3464.
[n] S. An et al., “Status of the PEFP Superconducting RF Project”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP112, pp. 820-822.
[n] M. K. Park, G. S. Lee, J. T. Noh, J. Y Huang, and I. S. Ko, “The Interlock System For U7 Undulator in PLS”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D008, pp. 686-688.
[n] J. M. Byrd et al., “A Dedicated Storage Ring for Far-IR Coherent Synchrotron Radiation at the ALS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI020, pp. 656-658.
[n] J. Teichert et al., “Status of the SRF Gun Operation at ELBE”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB23, pp. 453-456.
[n] K. D. Jacobs et al., “Instability Calculations for the MIT-Bates South Hall Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1791-1794.
[n] A. Goto, N. Nakanishi, and Y. Yano, “Computer Simulations of Accelerated Particles in the RIKEN SSC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B05, pp. 36-39.
[n] R. Shane, S. Cogan, S. M. Lidia, and T. Maruta, “Beam Loss in the First Segment of the FRIB Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 965-967. doi:10.18429/JACoW-NAPAC2019-THZBB4
[n] Y. Funakoshi et al., “Recent Progress of KEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEOAMH02, pp. 2372-2374.
[n] A. V. Aleksandrov et al., “Status of the Injector Complex for CT-Factory at Novosibirsk”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D068, pp. 254-256.
[n] Z. A. Conway, M. P. Kelly, P. N. Ostroumov, and K. W. Shepard, “Innovative Tuner Designs For Low Beta SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper FRIOA02, pp. 943-945.
[n] M. H. Chun et al., “Cure of Coupled Bunch Instabilities in PLS Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A02, pp. 1130-1132.
[n] A. Raimondo, O. O. Andreassen, D. Kudryavtsev, S. T. Page, A. Rijllart, and E. Zorin, “LHC Magnet Test Benches Controls Renovation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS023, pp. 368-370.
[n] N. Iida et al., “Commissioning of Positron Damping Ring and the Beam Transport for SuperKEKB”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 152. doi:10.18429/JACoW-eeFACT2018-TUPAB07
[n] J. Billan et al., “Performance of Prototypes and Start Up of Series Fabrication of the LHC Arc Quadrupoles”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH086, pp. 3430-3432.
[n] J. Choinski and P. Gmaj, “Heavy Ion Laboratory, University of Warsaw - a Unique Research Center in Poland”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper FRM2C01, pp. 297-299.
[n] M. P. Lafky, M. P. Atkinson, P. J. Giansiracusa, and L. N. Hearder, “Improvements to Injector System Efficiency at the Australian Synchrotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1378-1380. doi:10.18429/JACoW-IPAC2019-TUPGW001
For LaTeX
Use Complete Form
For BibTeX
References
- J. R. R?Ânsch et al., “Measurement of the Longitudinal Phase Space at the Photo Injector Test Facility at DESY in Zeuthen (PITZ)”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM016, pp. XX-XX.
- H. Kaji, T. Naito, S. Sasaki, and Y. Iitsuka, “Time Synchronization for Distant IOCs of the SuperKEKB Accelerators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3982-3985.
- R. V. Hariwal, S. Kedia, R. Mehta, H. K. Malik, and V. A. Verzilov, “Design, Fabrication and Testing of Compact Diagnostic System at IUAC”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper FRM1C04, pp. 294-296.
- P. J. Giansiracusa, M. J. Boland, M. P. Lafky, T. G. Lucas, R. P. Rassool, and M. Volpi, “The Effect of the SLED Installation on Extracted and Lost Beam at the Australian Synchrotron Linac.”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2794-2797.
- S. K. Mohanty, G. Guerini Rocco, P. Michelato, L. Monaco, C. Pagani, and D. Sertore, “Development of a Multialkali Antimonide Photocathode at INFN LASA”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 448-451.
- A. J. Favale, M. D. Cole, E. Peterson, and J. Rathke, “Fabrication of ILC Prototype Cavities at Advanced Energy Systems, Inc.”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD002, pp. 448-450.
- C. Pillai et al., “Performance of the LANSCE H$^-$ Source and Low Energy Beam Transport at Higher Peak Current”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W021, pp. 2743-2745.
- P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742.
- E. Kako et al., “Characteristics of the Results of Measurement on 1.3 GHz High Gradient Superconducting Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C12, pp. 425-429.
- A. Adelmann, S. R. A. Adam, H. Fitze, R. Geus, M. Humbel, and L. Stingelin, “On Start to End Simulation and Modeling Issues of the Megawatt Proton Beam Facility at PSI”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT055, pp. 3319-3321.
- P. von Rossen, K. Euler, and F. Hinterberger, “A New Method for High Precision Dee Voltage Stabilization”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J10, pp. 371-372.
- A. N. Dubrovin and A. A. Zholents, “A Combined Symmetric and Asymmetric B-factory with Monochromatization”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2835-2838.
- P. Gladkikh, I. Karnaukhov, A. Shcherbakov, Yu. Telegin, and A. Zelinsky, “Beam Dynamics Simulation in the Storage Ring N-100 with Electron-photon Interactions”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP2A12, pp. 1199-1201.
- H. Park, S. U. De Silva, J. R. Delayen, and S. I. Sosa Guitron, “Design of a Proof-of-principle Crabbing Cavity for the Jefferson Lab Electron-ion Collider”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3027-3030.
- R. W. Roeth, H. Heinrichs, V. G. Kurakin, G. Mueller, H. Piel, and J. Pouryamout, “Suppression of Field Emission in Superconducting S-Band Acceleration Structures”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1097-1100.
- T. Honda et al., “Results of the Straight-sections Upgrade of the Photon Factory Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS036, pp. 3365-3367.
- A. I. Pikin et al., “Recent Results with Au Ions Extracted from an EBIS using an 8A Electron Beam at BNL”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI002, pp. 1732-1734.
- H. Sakaki et al., “Calculation of Radiation Shielding for Laser-driven Hadron Beams Therapeutic Instrument”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA015, pp. 94-96.
- T. S. Dixit, Y. Shimosaki, and K. Takayama, “Adiabatic Damping of the Bunch-length in the Induction Synchrotron”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA099, pp. 244-246.
- G. B. Shen, “A Modular Environment for High Level Applications”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP094, pp. 859-861.
- D. Walz et al., “Tests and Description of Beam Containment Devices and Instrumentation-A New Dimension in Safety Problems”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 465-472.
- A. G. Afonin, V. N. Gres, and V. I. Terekhov, “Wide Range Extracted Beam Intensity Measurement at the IHEP”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP02D, pp. 1613-1614.
- V. A. Maisheev et al., “Research of Photon Emission of 120 GeV Channeling Positrons”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB001, pp. 172-174.
- C. Boccard et al., “Performance of the new SPS beam position orbit system (MOPOS)”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PS12, pp. XX-XX.
- K. Saito et al., “Superiority of Electropolishing over Chemical Polishing on High Gradients”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D02, pp. 795-813.
- W. Lawson et al., “The Design of a High Power Gyroklystron for Supercollider Applications”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1904-1907.
- A. Adelmann, S. R. A. Adam, M. Humbel, and P. A. Schmelzbach, “High Intensity Cyclotron Simulations: Towards Quantitative Predictions”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEAX04, pp. 202-204.
- V. Vogel, L. Butkowski, A. Cherepenko, S. Choroba, I. Harders, and J. Hartung, “Results of Testing of Multi-beam Klystrons for the European XFEL”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB004, pp. 479-481.
- A. Chakrabarti, “Radioactive Ion Beams Programme at Vecc Kolkata, Indian Efforts”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper FRM2I01, pp. 300-303.
- T. Tominaka et al., “Design Study of the Injection and Extraction Elements for the RIKEN Superconducting Ring Cyclotron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P019, pp. 3440-3442.
- V. Ranjbar, S. Y. Lee, M. Bai, E. Courant, and W. W. MacKay, “Mapping Out the Full Spin Resonance Structure of RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH139, pp. 3177-3179.
- B. Sayyar-Rodsari et al., “Parametric Modeling of Transverse Phase Space of an RF Photoinjector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN101, pp. 3462-3464.
- S. An et al., “Status of the PEFP Superconducting RF Project”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP112, pp. 820-822.
- M. K. Park, G. S. Lee, J. T. Noh, J. Y Huang, and I. S. Ko, “The Interlock System For U7 Undulator in PLS”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D008, pp. 686-688.
- J. M. Byrd et al., “A Dedicated Storage Ring for Far-IR Coherent Synchrotron Radiation at the ALS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI020, pp. 656-658.
- J. Teichert et al., “Status of the SRF Gun Operation at ELBE”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB23, pp. 453-456.
- K. D. Jacobs et al., “Instability Calculations for the MIT-Bates South Hall Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1791-1794.
- A. Goto, N. Nakanishi, and Y. Yano, “Computer Simulations of Accelerated Particles in the RIKEN SSC”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B05, pp. 36-39.
- R. Shane, S. Cogan, S. M. Lidia, and T. Maruta, “Beam Loss in the First Segment of the FRIB Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 965-967.
- Y. Funakoshi et al., “Recent Progress of KEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEOAMH02, pp. 2372-2374.
- A. V. Aleksandrov et al., “Status of the Injector Complex for CT-Factory at Novosibirsk”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D068, pp. 254-256.
- Z. A. Conway, M. P. Kelly, P. N. Ostroumov, and K. W. Shepard, “Innovative Tuner Designs For Low Beta SRF Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper FRIOA02, pp. 943-945.
- M. H. Chun et al., “Cure of Coupled Bunch Instabilities in PLS Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A02, pp. 1130-1132.
- A. Raimondo, O. O. Andreassen, D. Kudryavtsev, S. T. Page, A. Rijllart, and E. Zorin, “LHC Magnet Test Benches Controls Renovation”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS023, pp. 368-370.
- N. Iida et al., “Commissioning of Positron Damping Ring and the Beam Transport for SuperKEKB”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 152.
- J. Billan et al., “Performance of Prototypes and Start Up of Series Fabrication of the LHC Arc Quadrupoles”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH086, pp. 3430-3432.
- J. Choinski and P. Gmaj, “Heavy Ion Laboratory, University of Warsaw - a Unique Research Center in Poland”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper FRM2C01, pp. 297-299.
- M. P. Lafky, M. P. Atkinson, P. J. Giansiracusa, and L. N. Hearder, “Improvements to Injector System Efficiency at the Australian Synchrotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1378-1380.
Back to search