Favourites
For Word
[n] O. Karamyshev et al., “JINR PROJECTS of CYCLOTRON FOR PROTON THERAPY”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 140-143. doi:10.18429/JACoW-CYCLOTRONS2019-TUB02
[n] R. Denz et al., “Quench Detection and Diagnostic Systems for the Superconducting Circuits for the HL-LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4183-4186. doi:10.18429/JACoW-IPAC2019-THPTS036
[n] M. T. Heron and A. J. Rose, “Control System Challenges from an Upgrade to the Diamond Light Source Storage Ring”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 498-501. doi:10.18429/JACoW-ICALEPCS2015-MOPGF176
[n] S. P. Antipov, P. V. Avrakhov, G. Ha, S. V. Kuzikov, A. Liu, and J. G. Power, “Ultra-High Gradient Short RF Pulse Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2987-2989. doi:10.18429/JACoW-IPAC2019-WEPRB072
[n] W. A. Barth et al., “First Heavy Ion Beam Acceleration with a Superconducting Multi Gap CH-cavity”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 215-219. doi:10.18429/JACoW-HB2018-WEP1WB03
[n] M. S. Chun et al., “Development of High Power Electron Accelerator for Industrial Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A09, pp. 2612-2614.
[n] S. Takeda, Y. Nakayama, N. Yamamoto, and M. Yoshioka, “Ground Motion Study and the Related Effects on the J-PARC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH120, pp. 327-329.
[n] P. Pierini et al., “Limits for the Operation of the European XFEL 3.9 GHz System in CW Mode”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1023-1026. doi:10.18429/JACoW-IPAC2017-MOPVA066
[n] P. Forck, E. Guetlich, R. Haseitl, and P. Kowina, “Scintillation Screen Investigations for High Current Ion Beams at GSI Linac”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF008, pp. 100-104.
[n] I. V. Gonin et al., “650 MHz Elliptical Superconducting RF Cavities for PIP-II Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 943-945. doi:10.18429/JACoW-LINAC2016-THPLR041
[n] D. Marx, R. W. Assmann, R. T. P. D, and B. Marchetti, “Simulations of 3D Charge Density Measurements for Commissioning of the PolariX-TDS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1930-1933. doi:10.18429/JACoW-IPAC2018-WEPAF050
[n] P. O. Schmid and N. J. Walker, “A Spin Rotator for the ILC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS115, pp. 831-833.
[n] S. Huang, J. E. Chen, L. Lin, K. X. Liu, S. W. Quan, and F. Zhu, “Optics Layout for the ERL Test Facility at Peking University”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG2007, pp. 49-51.
[n] Y. Jiao, X. Cui, X. Y. Huang, and G. Xu, “Suppression of the CSR-induced Emittance Growth in Achromats using Two-dimensional point-kick Analysis”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THC03, pp. 976-979.
[n] M. Tejima, T. M. Mitsuhashi, Y. Hashimoto, T. Toyama, and S. Otsu, “Development of Offner Relay Optical System for OTR Monitor at 3-50 Beam Transport Line of J-PARC”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB67, pp. 222-226.
[n] J. C. Smith, J. E. Doyle, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Mechanical and Thermal Prototype Testing for a Rotatable Collimator for the LHC Phase II Collimation Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC095, pp. 286-288.
[n] G. R. Tassotto, H. Nguyen, D. P. Schoo, and G. W. Sellberg, “A Fiber Profile Monitor for low Beam Intensities.”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB01, pp. 51-53.
[n] C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
[n] A. J. Rose, A. I. Bell, M. T. Heron, and S. C. Lay, “Permanent Magnet Insertion Device Control Systems on Diamond”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP004, pp. 174-176.
[n] M. Lamont et al., “The LHC Sector Test”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS012, pp. 559-561.
[n] F. Hinode et al., “A Study on the Applicability of Landau Cavity to the 1.2 GeV Booster Synchrotron at Tohoku University”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA038, pp. 375-377.
[n] H. Schlarb et al., “Experimental Layout of 30 nm High Harmonic Laser Seeding at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC028, pp. 127-129.
[n] M. C. L. Buzio et al., “Development of Upgraded Magnetic Instrumentation for CERN's Real-time Reference Field Measurement Systems”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB016, pp. 310-312.
[n] Y. Song, K. Fan, C.-Y. Tsai, J. Yang, and Y. T. Yang, “Improvement of 6D Brightness by a 1.4-cell Photocathode RF Gun for MeV Ultrafast Electron Diffraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2033-2036. doi:10.18429/JACoW-IPAC2019-TUPTS047
[n] K. Kasamsook et al., “Study on Compact DC Electron Gun using Single Crystal Cathode of LaB6”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA052, pp. 181-183.
[n] H. Damerau, M. Morvillo, E. N. Shaposhnikova, J. Tuckmantel, and J.-L. Vallet, “Controlled Longitudinal Emittance Blow-up in the CERN PS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN070, pp. 4186-4188.
[n] T. Pettersson et al., “LHC Access System: from Design to Operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC129, pp. 1371-1373.
[n] A. Kondrashev et al., “Acceleration of Intense Beams of Highly-Charged Ions using Direct Plasma Injection Scheme”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THBY01, pp. 341-343.
[n] R. M??ller, R. Goergen, R. Lange, I. Mueller, and J. Rahn, “Introducing Fast Orbit Feedback at BESSY”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP059, pp. 773-775.
[n] T. Planche, R. A. Baartman, and Y.-N. Rao, “Improvement of the Current Stability from the TRIUMF Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WE3PB02, pp. 414-416.
[n] V. Sajaev and C. Yao, “Lattice Measurements of the APS Injector Rings”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1619-1622. doi:10.18429/JACoW-IPAC2019-TUPGW091
For LaTeX
Use Complete Form
For BibTeX
References
- O. Karamyshev et al., “JINR PROJECTS of CYCLOTRON FOR PROTON THERAPY”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 140-143.
- R. Denz et al., “Quench Detection and Diagnostic Systems for the Superconducting Circuits for the HL-LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4183-4186.
- M. T. Heron and A. J. Rose, “Control System Challenges from an Upgrade to the Diamond Light Source Storage Ring”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 498-501.
- S. P. Antipov, P. V. Avrakhov, G. Ha, S. V. Kuzikov, A. Liu, and J. G. Power, “Ultra-High Gradient Short RF Pulse Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2987-2989.
- W. A. Barth et al., “First Heavy Ion Beam Acceleration with a Superconducting Multi Gap CH-cavity”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 215-219.
- M. S. Chun et al., “Development of High Power Electron Accelerator for Industrial Applications”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A09, pp. 2612-2614.
- S. Takeda, Y. Nakayama, N. Yamamoto, and M. Yoshioka, “Ground Motion Study and the Related Effects on the J-PARC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH120, pp. 327-329.
- P. Pierini et al., “Limits for the Operation of the European XFEL 3.9 GHz System in CW Mode”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1023-1026.
- P. Forck, E. Guetlich, R. Haseitl, and P. Kowina, “Scintillation Screen Investigations for High Current Ion Beams at GSI Linac”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF008, pp. 100-104.
- I. V. Gonin et al., “650 MHz Elliptical Superconducting RF Cavities for PIP-II Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 943-945.
- D. Marx, R. W. Assmann, R. T. P. D, and B. Marchetti, “Simulations of 3D Charge Density Measurements for Commissioning of the PolariX-TDS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1930-1933.
- P. O. Schmid and N. J. Walker, “A Spin Rotator for the ILC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS115, pp. 831-833.
- S. Huang, J. E. Chen, L. Lin, K. X. Liu, S. W. Quan, and F. Zhu, “Optics Layout for the ERL Test Facility at Peking University”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG2007, pp. 49-51.
- Y. Jiao, X. Cui, X. Y. Huang, and G. Xu, “Suppression of the CSR-induced Emittance Growth in Achromats using Two-dimensional point-kick Analysis”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THC03, pp. 976-979.
- M. Tejima, T. M. Mitsuhashi, Y. Hashimoto, T. Toyama, and S. Otsu, “Development of Offner Relay Optical System for OTR Monitor at 3-50 Beam Transport Line of J-PARC”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB67, pp. 222-226.
- J. C. Smith, J. E. Doyle, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Mechanical and Thermal Prototype Testing for a Rotatable Collimator for the LHC Phase II Collimation Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC095, pp. 286-288.
- G. R. Tassotto, H. Nguyen, D. P. Schoo, and G. W. Sellberg, “A Fiber Profile Monitor for low Beam Intensities.”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB01, pp. 51-53.
- C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881.
- A. J. Rose, A. I. Bell, M. T. Heron, and S. C. Lay, “Permanent Magnet Insertion Device Control Systems on Diamond”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP004, pp. 174-176.
- M. Lamont et al., “The LHC Sector Test”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS012, pp. 559-561.
- F. Hinode et al., “A Study on the Applicability of Landau Cavity to the 1.2 GeV Booster Synchrotron at Tohoku University”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA038, pp. 375-377.
- H. Schlarb et al., “Experimental Layout of 30 nm High Harmonic Laser Seeding at FLASH”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC028, pp. 127-129.
- M. C. L. Buzio et al., “Development of Upgraded Magnetic Instrumentation for CERN's Real-time Reference Field Measurement Systems”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB016, pp. 310-312.
- Y. Song, K. Fan, C.-Y. Tsai, J. Yang, and Y. T. Yang, “Improvement of 6D Brightness by a 1.4-cell Photocathode RF Gun for MeV Ultrafast Electron Diffraction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2033-2036.
- K. Kasamsook et al., “Study on Compact DC Electron Gun using Single Crystal Cathode of LaB6”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA052, pp. 181-183.
- H. Damerau, M. Morvillo, E. N. Shaposhnikova, J. Tuckmantel, and J.-L. Vallet, “Controlled Longitudinal Emittance Blow-up in the CERN PS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN070, pp. 4186-4188.
- T. Pettersson et al., “LHC Access System: from Design to Operation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC129, pp. 1371-1373.
- A. Kondrashev et al., “Acceleration of Intense Beams of Highly-Charged Ions using Direct Plasma Injection Scheme”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THBY01, pp. 341-343.
- R. M??ller, R. Goergen, R. Lange, I. Mueller, and J. Rahn, “Introducing Fast Orbit Feedback at BESSY”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP059, pp. 773-775.
- T. Planche, R. A. Baartman, and Y.-N. Rao, “Improvement of the Current Stability from the TRIUMF Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WE3PB02, pp. 414-416.
- V. Sajaev and C. Yao, “Lattice Measurements of the APS Injector Rings”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1619-1622.
Back to search