Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Carcassi and K. Shroff, “Graphene: A Java Library for Real-Time Scientific Graphs”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC133, pp. 901-902.
[n] E. J. Ericson, D. Bertwistle, and M. J. Boland, “Energy Compression System Radio Frequency Design at the Canadian Light Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4231-4233. doi:10.18429/JACoW-IPAC2021-THPAB223
[n] T. Schmidt et al., “First Results of the UE212 Quasiperiodic Elliptical Electromagnetic Undulators at SLS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE024, pp. 2631-2633.
[n] H.-H. Braun, “Closing Remarks”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper FR2M2, unpublished.
[n] J. J. Bisognano, S. A. Heifets, and B. C. Yunn, “Loss Parameters for Very Short Bunches”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 708-711.
[n] B. Goddard, W. Bartmann, I. Efthymiopoulos, Y. Papaphilippou, and A. S. Parfenova, “Beam Transfer Systems for the LAGUNA-LBNO Long Baseline Neutrino Beam from the CERN SPS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI051, pp. 395-397.
[n] R. O. Hettel et al., “Ideas for a Future PEP Light Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC023, pp. 2031-2033.
[n] Y. A. Samofalova, A. M. Barnyakov, V. V. Kobets, M. A. Nozdrin, and A. Zhemchugov, “Design and Simulation of an S-Band RF Photogun for a New Injector of the Accelerator Linac-200 at JINR”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 322-323. doi:10.18429/JACoW-RuPAC2021-TUPSB44
[n] M.-S. Chiu et al., “The Commmissioning of Phase-I Insertion Devices in TPS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3360-3362. doi:10.18429/JACoW-IPAC2016-THPMB050
[n] Y. E. Tan, M. J. Boland, R. T. Dowd, G. LeBlanc, and M. J. Spencer, “Commissioning of the Australian Synchrotron with Libera EBPPs and Matlab”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA059, pp. 404-406.
[n] P. Wongkummoon, N. Kangrang, M. W. Rhodes, S. Rimjaem, J. Saisut, and C. Thongbai, “Design and Parameterization of Electron Beam Irradiation System for Natural Rubber Vulcanization”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3061-3063. doi:10.18429/JACoW-IPAC2022-THPOMS041
[n] S. H. Be, Y. P. Lee, Y. Morimoto, Y. Oikawa, H. Sakamoto, and S. Yokouchi, “Vacuum System for the 9 GeV Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 577-580.
[n] C. Li et al., “Timing System Upgrade for Top-off Operation of HLS-II”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 612-614. doi:10.18429/JACoW-ICALEPCS2017-TUPHA086
[n] N. Evans, A. Hoover, T. Gorlov, and V. Morozov, “Phase space painting of a self-consistent Danilov distribution in the SNS ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2483-2486. doi:10.18429/JACoW-IPAC2023-TUPM115
[n] F. C. Zhao et al., “Superconducting Elliptical Cavity (beta=0.45) and SRF Test Facility in IHEP”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP85, pp. XX-XX.
[n] D. Barni, A. Bosotti, C. Pagani, R. Lange, and H.-B. Peters, “A New Tuner for TESLA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO024, pp. 2205-2207.
[n] A. E. Vlieks et al., “Compton X-ray Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT161, pp. 2837-2839.
[n] V. Gubaidulin, S. E. Feddaoui Dellalou, A. Gamelin, S. Habet, L. Nadolski, and R. Nagaoka, “Interaction of intrabeam scattering, longitudinal wakefield, and a passive harmonic RF cavity in SOLEIL II”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS009, unpublished.
[n] M. M. Strohmeier et al., “Development of a Scintillator Probe Based on Fiber Optics for Radial Beam Diagnostics of the Ion Beam of the 88-Inch Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU3PB02, pp. 262-264.
[n] F. H. de Sá, L. Liu, and A. R. D. Rodrigues, “Booster Synchrotron for SIRIUS Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP052, pp. 679-681.
[n] N. Samadi, G. Lovric, C. Ozkan Loch, and X. Shi, “An X-Ray Beam Property Analyzer Based on Dispersive Crystal Diffraction”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 366-369. doi:10.18429/JACoW-IBIC2022-WE1C2
[n] J. Caporaso, “Linear Induction Accelerator Approach for Advanced Radiography”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3C005, pp. 1248-1250.
[n] S. Paret, O. Boine-Frankenheim, V. Kornilov, and T. Weiland, “Transverse Schottky Noise and Beam Transfer Functions with Space Charge”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC101, pp. 3212-3214.
[n] A. Halavanau et al., “Development of X-ray laser oscillator”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG45, unpublished.
[n] M. Chowdhary, L. Doolittle, G. Lahti, S. N. Simrock, and R. Terrell, “Automated Frequency Tuning of SRF Cavities at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR14, pp. 2268-2270.
[n] F. Lin, J. Guo, V. Morozov, and Y. Zhang, “Study of an ERL-based X-ray FEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1893-1895. doi:10.18429/JACoW-IPAC2023-TUPL059
[n] B. T. Fishler et al., “Sustaining the National Ignition Facility (NIF) Integrated Computer Control System (ICCS) over its Thirty Year Lifespan”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1201-1205. doi:10.18429/JACoW-ICALEPCS2017-THCPL06
[n] C. Pascual-Izarra et al., “Taurus Big & Small: From Particle Accelerators to Desktop Labs”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 166-169. doi:10.18429/JACoW-ICALEPCS2017-TUBPL02
[n] S. A. Litvinov, A. Dolinskyy, O. E. Gorda, F. Nolden, and M. Steck, “An Alternative Ion-Optical Mode of the Recuperated Experimental Storage Ring (RESR)”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP118, pp. 5056-5058.
[n] R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211.
[n] R. Ganter et al., “SLS 2.0 storage ring components overview before installation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1023-1026. doi:10.18429/JACoW-IPAC2023-MOPM020
[n] F. Nolden et al., “Stochastic Cooling in the Framework of the FAIR Project at GSI”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP051, pp. 3479-3481.
[n] A. Navitski, A. Prudnikava, and Y. Tamashevich, “Progress of R&D on SRF Cavities at DESY towards the ILC Performance Goal”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2499-2501. doi:10.18429/JACoW-IPAC2014-WEPRI011
[n] C. Bourat, A. Massarotti, G. Meyrand, D. T. Tran, D. Tronc, and A. Wrulich, “The 100 MeV Preinjector for the Trieste Synchrotron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 935-938.
[n] R. Lambiase, “Application of the Superconducting Power Cables in the RHIC Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP06F, pp. 2068-2069.
[n] Y. Wang et al., “Understanding the beam quality requirement for high energy electron microscopy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2609-2612. doi:10.18429/JACoW-IPAC2023-WEODB3
[n] R. Bartolini, C. Christou, I. P. S. Martin, J. H. Rowland, and B. Singh, “High-level Software for Diamond Commissioning and Operation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH112, pp. 3065-3067.
[n] S. P. Moeller, “ASTRID, A Storage Ring for Ions and Electrons”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 112-115.
[n] T. Kasuga and H. Yonehara, “Suppression of Longitudinal Coupled-Bunch Instability in UVSOR”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 918-921.
[n] O. Gilanliogullari, B. Mustapha, and P. Snopok, “Rotational invariance and IBS in circular modes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2391-2394. doi:10.18429/JACoW-IPAC2023-TUPM082
[n] S. Wang, C. Christou, R. Fielder, P. Gu, and I. Martin, “RF feedback simulation for Diamond-II using ELEGANT”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1099-1102. doi:10.18429/JACoW-IPAC2023-MOPM047
[n] T. Weilbach et al., “Status of the THz@PITZ Project - The Proof-of-Principle Experiment on a THz SASE FEL at the PITZ Facility”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1033-1036. doi:10.18429/JACoW-IPAC2022-TUPOPT016
[n] M. G. Mazarakis et al., “Experiments Investigating the Generation and Transport of 10-12 MeV, 30-kA, mm-Size Electron Beams with Linear Inductive Voltage Adders”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3C004, pp. 1245-1247.
[n] S. K. Shukla, R. Sridhar, D. P. Yadav, R. J. Patel, and A. S. Raja Rao, “Design Aspects of UHV System for INDUS-2.”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D043, pp. 779-781.
[n] P. Echevarria, J. Knobloch, A. Neumann, A. Ushakov, E. Aldekoa, and J. Jugo, “SRF Cavity Simulator for LLRF Algorithms Debugging”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2118-2120. doi:10.18429/JACoW-IPAC2018-WEPAK013
[n] S. Verd??-Andr?®s and Q. Wu, “Cavity Design for the Updated eRHIC Crabbing System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 818-821. doi:10.18429/JACoW-IPAC2019-MOPRB109
[n] M. Aiba et al., “Exploring the Potential of the Swiss Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1554-1556. doi:10.18429/JACoW-IPAC2019-TUPGW066
[n] V. Sharma, S. Acharya, and K. C. Mittal, “Distributed Control System for an Industrial Electron Accelerator”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP049, pp. XX-XX.
[n] R. Keller et al., “Commissioning of the SNS Front-End Systems at Berkeley Lab”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE012, pp. 1025-1027.
[n] T. Mimashi et al., “The Design of Beam Abort System for the Super KEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA023, pp. 1378-1380.
[n] J. D. Fox and T. Mastorides, “Stripline Transversal Filter Techniques For Sub-Picosecond Bunch Timing Measurements”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB02, pp. 54-56.
[n] B. T. Loseth, M. Berz, K. Makino, P. Snopok, and H. Zhang, “Space Charge Simulation in COSY using The Fast Multipole Method”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 460-462. doi:10.18429/JACoW-IPAC2014-MOPME038
[n] H. Yonehara and T. Kasuga, “Beam Quality in Single Bunch Mode of UVSOR Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 924-926.
[n] S. Barabin et al., “Multifunction Test-Bench For Heavy Ion Sources”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM27, pp. XX-XX.
[n] D. W. Peterson and Y. Torun, “Fermilab MuCool Test Area Cavity Conditioning Control Using LabVIEW”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA08, pp. 1370-1372.
[n] A. Novokhatski, A. V. Aleksandrov, and S. A. Heifets, “Beam Diagnostic by Outside Beam Chamber Fields”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP035, pp. 4024-4026.
[n] W. X. Cheng, B. Bacha, B. N. Kosciuk, and D. Padrazo Jr, “Improvements of NSLS-II X-ray Diagnostic Beamlines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1837-1840. doi:10.18429/JACoW-IPAC2018-WEPAF012
[n] H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120.
[n] G. Tranquille, A. Frassier, and L. V. Joergensen, “The ELENA Electron Cooler: Parameter Choice and Expected Performance”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO16, pp. 133-135.
[n] Y. Renier et al., “High Average RF Power Tests With 2 RF Vacuum Windows at PITZ”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1744-1746. doi:10.18429/JACoW-IPAC2016-TUPOW003
For LaTeX
Use Complete Form
For BibTeX
References
- G. Carcassi and K. Shroff, “Graphene: A Java Library for Real-Time Scientific Graphs”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC133, pp. 901-902.
- E. J. Ericson, D. Bertwistle, and M. J. Boland, “Energy Compression System Radio Frequency Design at the Canadian Light Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4231-4233.
- T. Schmidt et al., “First Results of the UE212 Quasiperiodic Elliptical Electromagnetic Undulators at SLS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE024, pp. 2631-2633.
- H.-H. Braun, “Closing Remarks”, presented at the 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper FR2M2, unpublished.
- J. J. Bisognano, S. A. Heifets, and B. C. Yunn, “Loss Parameters for Very Short Bunches”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 708-711.
- B. Goddard, W. Bartmann, I. Efthymiopoulos, Y. Papaphilippou, and A. S. Parfenova, “Beam Transfer Systems for the LAGUNA-LBNO Long Baseline Neutrino Beam from the CERN SPS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI051, pp. 395-397.
- R. O. Hettel et al., “Ideas for a Future PEP Light Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC023, pp. 2031-2033.
- Y. A. Samofalova, A. M. Barnyakov, V. V. Kobets, M. A. Nozdrin, and A. Zhemchugov, “Design and Simulation of an S-Band RF Photogun for a New Injector of the Accelerator Linac-200 at JINR”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 322-323.
- M.-S. Chiu et al., “The Commmissioning of Phase-I Insertion Devices in TPS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3360-3362.
- Y. E. Tan, M. J. Boland, R. T. Dowd, G. LeBlanc, and M. J. Spencer, “Commissioning of the Australian Synchrotron with Libera EBPPs and Matlab”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA059, pp. 404-406.
- P. Wongkummoon, N. Kangrang, M. W. Rhodes, S. Rimjaem, J. Saisut, and C. Thongbai, “Design and Parameterization of Electron Beam Irradiation System for Natural Rubber Vulcanization”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3061-3063.
- S. H. Be, Y. P. Lee, Y. Morimoto, Y. Oikawa, H. Sakamoto, and S. Yokouchi, “Vacuum System for the 9 GeV Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 577-580.
- C. Li et al., “Timing System Upgrade for Top-off Operation of HLS-II”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 612-614.
- N. Evans, A. Hoover, T. Gorlov, and V. Morozov, “Phase space painting of a self-consistent Danilov distribution in the SNS ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM115, pp. 2483-2486.
- F. C. Zhao et al., “Superconducting Elliptical Cavity (beta=0.45) and SRF Test Facility in IHEP”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP85, pp. XX-XX.
- D. Barni, A. Bosotti, C. Pagani, R. Lange, and H.-B. Peters, “A New Tuner for TESLA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO024, pp. 2205-2207.
- A. E. Vlieks et al., “Compton X-ray Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT161, pp. 2837-2839.
- V. Gubaidulin, S. E. Feddaoui Dellalou, A. Gamelin, S. Habet, L. Nadolski, and R. Nagaoka, “Interaction of intrabeam scattering, longitudinal wakefield, and a passive harmonic RF cavity in SOLEIL II”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS009, this conference.
- M. M. Strohmeier et al., “Development of a Scintillator Probe Based on Fiber Optics for Radial Beam Diagnostics of the Ion Beam of the 88-Inch Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU3PB02, pp. 262-264.
- F. H. de Sá, L. Liu, and A. R. D. Rodrigues, “Booster Synchrotron for SIRIUS Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP052, pp. 679-681.
- N. Samadi, G. Lovric, C. Ozkan Loch, and X. Shi, “An X-Ray Beam Property Analyzer Based on Dispersive Crystal Diffraction”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 366-369.
- J. Caporaso, “Linear Induction Accelerator Approach for Advanced Radiography”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3C005, pp. 1248-1250.
- S. Paret, O. Boine-Frankenheim, V. Kornilov, and T. Weiland, “Transverse Schottky Noise and Beam Transfer Functions with Space Charge”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC101, pp. 3212-3214.
- A. Halavanau et al., “Development of X-ray laser oscillator”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG45, unpublished.
- M. Chowdhary, L. Doolittle, G. Lahti, S. N. Simrock, and R. Terrell, “Automated Frequency Tuning of SRF Cavities at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR14, pp. 2268-2270.
- F. Lin, J. Guo, V. Morozov, and Y. Zhang, “Study of an ERL-based X-ray FEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL059, pp. 1893-1895.
- B. T. Fishler et al., “Sustaining the National Ignition Facility (NIF) Integrated Computer Control System (ICCS) over its Thirty Year Lifespan”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1201-1205.
- C. Pascual-Izarra et al., “Taurus Big & Small: From Particle Accelerators to Desktop Labs”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 166-169.
- S. A. Litvinov, A. Dolinskyy, O. E. Gorda, F. Nolden, and M. Steck, “An Alternative Ion-Optical Mode of the Recuperated Experimental Storage Ring (RESR)”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP118, pp. 5056-5058.
- R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211.
- R. Ganter et al., “SLS 2.0 storage ring components overview before installation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM020, pp. 1023-1026.
- F. Nolden et al., “Stochastic Cooling in the Framework of the FAIR Project at GSI”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP051, pp. 3479-3481.
- A. Navitski, A. Prudnikava, and Y. Tamashevich, “Progress of R&D on SRF Cavities at DESY towards the ILC Performance Goal”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2499-2501.
- C. Bourat, A. Massarotti, G. Meyrand, D. T. Tran, D. Tronc, and A. Wrulich, “The 100 MeV Preinjector for the Trieste Synchrotron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 935-938.
- R. Lambiase, “Application of the Superconducting Power Cables in the RHIC Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP06F, pp. 2068-2069.
- Y. Wang et al., “Understanding the beam quality requirement for high energy electron microscopy”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEODB3, pp. 2609-2612.
- R. Bartolini, C. Christou, I. P. S. Martin, J. H. Rowland, and B. Singh, “High-level Software for Diamond Commissioning and Operation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH112, pp. 3065-3067.
- S. P. Moeller, “ASTRID, A Storage Ring for Ions and Electrons”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 112-115.
- T. Kasuga and H. Yonehara, “Suppression of Longitudinal Coupled-Bunch Instability in UVSOR”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 918-921.
- O. Gilanliogullari, B. Mustapha, and P. Snopok, “Rotational invariance and IBS in circular modes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM082, pp. 2391-2394.
- S. Wang, C. Christou, R. Fielder, P. Gu, and I. Martin, “RF feedback simulation for Diamond-II using ELEGANT”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM047, pp. 1099-1102.
- T. Weilbach et al., “Status of the THz@PITZ Project - The Proof-of-Principle Experiment on a THz SASE FEL at the PITZ Facility”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1033-1036.
- M. G. Mazarakis et al., “Experiments Investigating the Generation and Transport of 10-12 MeV, 30-kA, mm-Size Electron Beams with Linear Inductive Voltage Adders”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3C004, pp. 1245-1247.
- S. K. Shukla, R. Sridhar, D. P. Yadav, R. J. Patel, and A. S. Raja Rao, “Design Aspects of UHV System for INDUS-2.”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D043, pp. 779-781.
- P. Echevarria, J. Knobloch, A. Neumann, A. Ushakov, E. Aldekoa, and J. Jugo, “SRF Cavity Simulator for LLRF Algorithms Debugging”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2118-2120.
- S. Verd??-Andr?®s and Q. Wu, “Cavity Design for the Updated eRHIC Crabbing System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 818-821.
- M. Aiba et al., “Exploring the Potential of the Swiss Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1554-1556.
- V. Sharma, S. Acharya, and K. C. Mittal, “Distributed Control System for an Industrial Electron Accelerator”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP049, pp. XX-XX.
- R. Keller et al., “Commissioning of the SNS Front-End Systems at Berkeley Lab”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE012, pp. 1025-1027.
- T. Mimashi et al., “The Design of Beam Abort System for the Super KEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA023, pp. 1378-1380.
- J. D. Fox and T. Mastorides, “Stripline Transversal Filter Techniques For Sub-Picosecond Bunch Timing Measurements”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB02, pp. 54-56.
- B. T. Loseth, M. Berz, K. Makino, P. Snopok, and H. Zhang, “Space Charge Simulation in COSY using The Fast Multipole Method”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 460-462.
- H. Yonehara and T. Kasuga, “Beam Quality in Single Bunch Mode of UVSOR Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 924-926.
- S. Barabin et al., “Multifunction Test-Bench For Heavy Ion Sources”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM27, pp. XX-XX.
- D. W. Peterson and Y. Torun, “Fermilab MuCool Test Area Cavity Conditioning Control Using LabVIEW”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA08, pp. 1370-1372.
- A. Novokhatski, A. V. Aleksandrov, and S. A. Heifets, “Beam Diagnostic by Outside Beam Chamber Fields”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP035, pp. 4024-4026.
- W. X. Cheng, B. Bacha, B. N. Kosciuk, and D. Padrazo Jr, “Improvements of NSLS-II X-ray Diagnostic Beamlines”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1837-1840.
- H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120.
- G. Tranquille, A. Frassier, and L. V. Joergensen, “The ELENA Electron Cooler: Parameter Choice and Expected Performance”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO16, pp. 133-135.
- Y. Renier et al., “High Average RF Power Tests With 2 RF Vacuum Windows at PITZ”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1744-1746.
Back to search