JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	B. Hounsell et al., “Optimization of a High Bunch Charge ERL Injection Merger for PERLE”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3983-3986. doi:10.18429/JACoW-IPAC2021-THPAB106
[n]	V. Senaj, L. Ducimeti?¿re, and E. Vossenberg, “Upgrade of the Super Proton Synchrotron Vertical Beam Dump System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD093, pp. 3314-3316. 
[n]	A. E. Ivanov, F. Gerigk, and A. Macpherson, “Direct Measurement of Thermoelectric Currents During Cool Down”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1139-1142. doi:10.18429/JACoW-SRF2019-THP095
[n]	V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1367-1370. doi:10.18429/JACoW-IPAC2016-TUPMR050
[n]	E. Crosbie, A. Gorka, E. Parker, C. Potts, and L. Ratner, “Injection and Acceleration of Protons in the Zero Gradient Synchrotron (ZGS) by Stripping H- Ions”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1056-1060. 
[n]	J. Henderson, A. Aiken, E. Snedden, and N. Joshi, “Stabilised timing links for the CLARA test facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4131-4134. doi:10.18429/JACoW-IPAC2023-THPA072
[n]	L. R. Evans and D. J. Warner, “Real-Time Measurements of Proton Bunch Form”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P09, pp. 349-355. 
[n]	Y. C. Zhang, S. P. Li, H. H. Lu, S. C. Sun, and Y. F. Yang, “Preliminary Design of Cooling System for a PrFeB-based Cryogenic Permanent Magnet Undulator Prototype at IHEP”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2743-2745. doi:10.18429/JACoW-IPAC2014-WEPRI105
[n]	E. H. R. Gaxiola et al., “Upgrade and Tests of the SPS Fast Extraction Kicker System for LHC and CNGS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT016, pp. 566-568. 
[n]	R. Bodenstein et al., “Status of permanent magnet radiation resiliency studies at CEBAF”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 630-634. doi:10.18429/JACoW-NAPAC2025-WEAN02
[n]	M. Delonca, T. Antonakakis, D. Grenier, C. Maglioni, and A. Sarrió Martínez, “A Clamped Be Window for the Dump of the HiRadMat Experiment at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP015, pp. 3758-3760. 
[n]	R. L. Gluckstern, R. K. Cooper, and R. Li, “Electric Polarizability and Magnetic Susceptibility of Small Holes in a Thin Screen”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 88-91. 
[n]	S. Gurov, P. A. Bak, D. Chernousov, P. V. Logatchev, V. Pavlov, and E. Pyata, “The Measurements of the Longitudinal Beam Profile on the Preinjector VEPP-5”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOALH03, pp. 259-261. 
[n]	X. Y. Li, Z. Duan, D. Ji, Y. Jiao, and Y. F. Yang, “Effects of Insertion Devices on Stored Electron Beam of High Energy Photon Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 911-913. doi:10.18429/JACoW-IPAC2017-MOPVA026
[n]	Y. F. Yang, H. H. Lu, S. C. Sun, and X. Z. Zhang, “Field Error Correction Considerations of Cryogenic Permanent Magnet Undulator (CPMU) for High Energy Photon Source Test Facility (HEPS-TF)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4038-4040. doi:10.18429/JACoW-IPAC2016-THPOW041
[n]	G. Arduini et al., “Status of the LHC Beam in the CERN SPS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THAGB002, pp. 206-208. 
[n]	L. R. Evans, “LHC: Construction and Commissioning Status”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOXKI01, pp. 1-5. 
[n]	F. M. Velotti et al., “Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3399-3403. doi:10.18429/JACoW-IPAC2019-THXXPLM2
[n]	R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Random Initial Displacement”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2398-2400. 
[n]	B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Conceptual Design of the PERLE Injector”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 743-746. doi:10.18429/JACoW-LINAC2022-THPOJO26
[n]	A. Antoine, C. Boucly, P. Juteau, N. Magnin, and N. Voumard, “First Operational Experience with the LHC Beam Dump Trigger Synchronisation Unit”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU019, pp. 1100-1103. 
[n]	A. Gilfellon, R. M. Jones, B. Muratori, A. Wheelhouse, and P. Williams, “Beam Dynamics Tracking Simulations for UK XFEL Under the Influence of Long-Range Dipole Wakefields”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2085, unpublished. 
[n]	O. Brunner, A. Butterworth, G. Cavallari, N. Hilleret, J. M. Jimenez, and J. T??ckmantel, “First Experience with in situ Helium Processing of the LEP Superconducting Modules”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A14, pp. 133-137. 
[n]	Y. Papaphilippou, R. Corsini, and L. R. Evans, “The SPS as an Ultra-low Emittance Damping Ring Test Facility for CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME042, pp. 1661-1663. 
[n]	R. H. Miller, “Measurements of the SLAC Injector Emittance”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-05, pp. 65-71. 
[n]	E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655. 
[n]	Z. Zhang, F. S. Chen, and Y. F. Yang, “The Magnetic Measurement of Conventional Magnets for Free-Electron Laser Project of Chinese Academy of Engineering Physics”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1115-1117. doi:10.18429/JACoW-IPAC2016-TUPMB006
[n]	M. T. Hibberd et al., “Terahertz-Driven Acceleration of a Relativistic Electron Beam”, in Proc. IPAC'20, Caen, France, May 2020, paper TUVIR07, pp. XX-XX. 
[n]	L. R. Evans, “Advanced Technology Issues in the LHC Project”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 429-434. 
[n]	M. Green, R. Gupta, R. B. Palmer, and R. Scanlan, “Nb3Sn Magnets for a MUON Collider”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP22F, pp. 1990-1992. 
[n]	L. R. Evans and J. Gareyte, “Performance Limitations of the CERN SPS Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2234-2237. 
[n]	B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2071-2074. doi:10.18429/JACoW-IPAC2019-TUPTS066
[n]	B. Hounsell and J. McKenzie, “Beam dynamics of the RUEDI diffraction beamline”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2079-2082. doi:10.18429/JACoW-IPAC2023-TUPL145
[n]	C. Torregrosa et al., “The Hiradmat 27 Experiment: Exploring High-Density Materials Response at Extreme Conditions for Antiproton Production”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3705-3708. doi:10.18429/JACoW-IPAC2016-THPMY023
[n]	N. Andreev et al., “Field Quality of Quadrupole R&D Models for the LHC IR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP102, pp. 3194-3196. 
[n]	F. Yaman, W. Ackermann, and T. Weiland, “Comparison of Eigenvalue Solvers for Large Sparse Matrix Pencils”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRSAC2, pp. 287-289. 
[n]	C. T. Rogers and M. Ellis, “High Precision Measurement of Muon Beam Emittance Reduction in MICE”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE013, pp. 1330-1332. 
[n]	A. Antoine, E. Carlier, and N. Voumard, “The LHC Beam Dumping System Trigger Synchronisation and Distribution System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_020. 
[n]	L. Cowie et al., “RF design of the 1 kHz photoinjector for the RUEDI Electron Diffraction Facility”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3074, unpublished. 
[n]	A. S. Aryshev et al., “Micron Size Laser-Wire System at the ATF Extraction Line, Recent Results and ATF-II Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP023, pp. 3997-3999. 
[n]	G. Gisler and R. Faehl, “Self-Trapping Electron Ring Accelerators”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3204-3206. 
[n]	M. J. Barnes, E. Carlier, L. Ducimeti re, G. H. Schroeder, E. Vossenberg, and G. D. Wait, “Measurements on a Fast 66 kV Resonant Charging Power Supply for the LHC Inflectors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02B, pp. 2278-2280. 
[n]	H. H. Lu et al., “Development of the First U48 Undulator Prototype for the European X-ray Free Electron Laser”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPB18, pp. 420-423. 
[n]	L. S. Esposito et al., “Crystal for Slow Extraction Loss-Reduction of the SPS Electrostatic Septum”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2379-2382. doi:10.18429/JACoW-IPAC2019-WEPMP028
[n]	J. Yang et al., “Femtosecond RF Gun Based MeV Electron Diffraction”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper FROAN4, pp. 2558-2560. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search