Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. A. Krafft, “Short Pulse Synchrotron Light from Jefferson Lab's Nuclear Physics Accelerator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP78, pp. 2448-2449.
[n] Y. Yuri, M. Fukuda, and T. Yuyama, “Diverse Beam Profile Shapings Through Nonlinear Focusing of Multipole Magnets in a Beam Transport Line”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper FRXBA2, unpublished.
[n] L. Ge et al., “Integrated Accelerator Simulation with Electromagnetics and Beam Physics Codes”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 885-887. doi:10.18429/JACoW-NAPAC2019-WEPLE02
[n] G. A. Krafft, “Use of Jefferson Lab's High Average Power FEL as a Thomson Backscatter X-Ray Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4B012, pp. 739-741.
[n] X. Liu, C. Adolphsen, M. Santana-Leitner, L. Xiao, and F. Zhou, “Design and Operation Experience of a Multi-Collimator/YAG Screen Device on LCLS II Low Energy Beamline”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 631-633. doi:10.18429/JACoW-NAPAC2022-WEPA08
[n] J. Y. Ma and G. Huang, “Microphonics Simulation and Parameters Design of the SRF Cavities for CiADS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2903-2905. doi:10.18429/JACoW-IPAC2019-WEPRB044
[n] M. Otani, N. Kawamura, T. Mibe, T. Yamazaki, K. Ishida, and G. Marshall, “Simulation of Surface Muon Beamline, Ultra-Slow Muon Production and Extraction for the J-PARC g-2/EDM Experiment”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 970-973. doi:10.18429/JACoW-IPAC2018-TUPAK007
[n] Y. M. Li, K. X. Liu, S. W. Quan, F. Zhu, and R. Nassiri, “Design and Fabrication of a 5-Cell High Current Superconducting Cavity”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC096, pp. 301-303.
[n] J. L. Navarro Quirante et al., “Effect of Beam-Loading on the Breakdown Rate of High Gradient Accelerating Structures”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP033, pp. 499-501.
[n] J. Y. Ma, Z. Gao, G. Huang, and L. P. Sun, “Low-level RF System for The Chinese ADS Front-end Demo Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2159-2161. doi:10.18429/JACoW-IPAC2018-WEPAL008
[n] Y. Wei et al., “Beam Dynamics Studies into Grating-based Dielectric Laser-driven Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1970-1972. doi:10.18429/JACoW-IPAC2016-TUPOY027
[n] H. Zhang, Y. M. Li, K. X. Liu, F. Wang, and B. C. Zhang, “LLRF Control System for PKU DC-SC Photocathode Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC097, pp. 304-306.
[n] Y. M. Li, K. Hanahoe, O. Mete Apsimon, T. H. Pacey, and G. X. Xia, “Proton-Driven Electron Acceleration in Hollow Plasma”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1601-1603. doi:10.18429/JACoW-IPAC2016-TUPMY025
[n] A. Kiyomichi, M. Masaki, T. Masuda, and S. Ueda, “Development of MicroTCA-based Image Processing System at SPring-8”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC088, pp. 786-789.
[n] Y. Yuri, M. Fukuda, and T. Yuyama, “Transverse Profile Shaping of a Charged-Particle Beam using Multipole Magnets - Formation of Hollow Beams -”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 184-186. doi:10.18429/JACoW-IPAC2019-MOPGW041
[n] L. Shen, Y. L. Chi, and C. Huang, “A Prototype of Pulsed Power Supply for CSNS/RCS Injection Painting Bump Magnets”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP070, pp. 1711-1713.
[n] F. Jackson, “Collimation Optimisation in the Beam Delivery System of the International Linear Collider”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS074, pp. 721-723.
[n] E. Baron, “Concluding Remarks”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper M-3, pp. XX-XX.
[n] D. X. Wang and G. A. Krafft, “Measuring Longitudinal Distribution and Bunch Length of Femtosecond Bunches with RF Zero-Phasing Method”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P053, pp. 2020-2022.
[n] L. J. Wen, Y. He, Y. M. Li, and S. H. Zhang, “CADS 650 MHz =0.63 Elliptical Cavity Study”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3836-3838. doi:10.18429/JACoW-IPAC2015-THPF062
[n] J. Y. Ma and G. Huang, “Microphonics Simulation and Parameters Design of the SRF Cavities for CiADS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2903-2905. doi:10.18429/JACoW-IPAC2019-WEPRB044
For LaTeX
Use Complete Form
For BibTeX
References
- G. A. Krafft, “Short Pulse Synchrotron Light from Jefferson Lab's Nuclear Physics Accelerator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP78, pp. 2448-2449.
- Y. Yuri, M. Fukuda, and T. Yuyama, “Diverse Beam Profile Shapings Through Nonlinear Focusing of Multipole Magnets in a Beam Transport Line”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper FRXBA2, unpublished.
- L. Ge et al., “Integrated Accelerator Simulation with Electromagnetics and Beam Physics Codes”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 885-887.
- G. A. Krafft, “Use of Jefferson Lab's High Average Power FEL as a Thomson Backscatter X-Ray Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4B012, pp. 739-741.
- X. Liu, C. Adolphsen, M. Santana-Leitner, L. Xiao, and F. Zhou, “Design and Operation Experience of a Multi-Collimator/YAG Screen Device on LCLS II Low Energy Beamline”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 631-633.
- J. Y. Ma and G. Huang, “Microphonics Simulation and Parameters Design of the SRF Cavities for CiADS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2903-2905.
- M. Otani, N. Kawamura, T. Mibe, T. Yamazaki, K. Ishida, and G. Marshall, “Simulation of Surface Muon Beamline, Ultra-Slow Muon Production and Extraction for the J-PARC g-2/EDM Experiment”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 970-973.
- Y. M. Li, K. X. Liu, S. W. Quan, F. Zhu, and R. Nassiri, “Design and Fabrication of a 5-Cell High Current Superconducting Cavity”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC096, pp. 301-303.
- J. L. Navarro Quirante et al., “Effect of Beam-Loading on the Breakdown Rate of High Gradient Accelerating Structures”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP033, pp. 499-501.
- J. Y. Ma, Z. Gao, G. Huang, and L. P. Sun, “Low-level RF System for The Chinese ADS Front-end Demo Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2159-2161.
- Y. Wei et al., “Beam Dynamics Studies into Grating-based Dielectric Laser-driven Accelerators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1970-1972.
- H. Zhang, Y. M. Li, K. X. Liu, F. Wang, and B. C. Zhang, “LLRF Control System for PKU DC-SC Photocathode Injector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC097, pp. 304-306.
- Y. M. Li, K. Hanahoe, O. Mete Apsimon, T. H. Pacey, and G. X. Xia, “Proton-Driven Electron Acceleration in Hollow Plasma”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1601-1603.
- A. Kiyomichi, M. Masaki, T. Masuda, and S. Ueda, “Development of MicroTCA-based Image Processing System at SPring-8”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC088, pp. 786-789.
- Y. Yuri, M. Fukuda, and T. Yuyama, “Transverse Profile Shaping of a Charged-Particle Beam using Multipole Magnets - Formation of Hollow Beams -”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 184-186.
- L. Shen, Y. L. Chi, and C. Huang, “A Prototype of Pulsed Power Supply for CSNS/RCS Injection Painting Bump Magnets”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP070, pp. 1711-1713.
- F. Jackson, “Collimation Optimisation in the Beam Delivery System of the International Linear Collider”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS074, pp. 721-723.
- E. Baron, “Concluding Remarks”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper M-3, pp. XX-XX.
- D. X. Wang and G. A. Krafft, “Measuring Longitudinal Distribution and Bunch Length of Femtosecond Bunches with RF Zero-Phasing Method”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P053, pp. 2020-2022.
- L. J. Wen, Y. He, Y. M. Li, and S. H. Zhang, “CADS 650 MHz =0.63 Elliptical Cavity Study”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3836-3838.
- J. Y. Ma and G. Huang, “Microphonics Simulation and Parameters Design of the SRF Cavities for CiADS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2903-2905.
Back to search